kleemajo / openiboot Goto Github PK

Copyright (C) 2008 David Wang (planetbeing).

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.

NOTE: Version 0.3 and above will not boot iDroid 2.6.32 series kernels without additional parameters being passed to the kernel.

IT IS STRONGLY ADVISED THAT YOU DO NOT ATTEMPT TO RUN NAND WRITE FUNCTIONS IN THE A4 VERSION AT THIS POINT IN TIME.

DOING SO WILL INEVITABLY CAUSE YOU TO NEED TO RESTORE YOUR DEVICE, MAY LEAVE PERMANENT NAND BLOCK DAMAGE AND MAY ALSO CAUSE GREMLINS TO CRAWL OUT OF YOUR ARSE.

(If you read this warning properly, really unless you know wtf you are looking at - leave it alone until we stablise it)

Build an ARM toolchain (this only needs to be done once - for subsequent builds this step can be omitted unless there has been a toolchain update):

sudo toolchain/build-toolchain.sh make

Wait, for a long time, as the toolchain is compiled.

Initialise Submodules git submodule init git submodule update

Compile OpeniBoot:

To run openiboot from recovery mode (a.k.a iboot), you’ll need to create an img3 image. To run openiboot from DFU mode, you'll need to create a bin.

You will need a system capable of running x86 Linux binaries (Build requires scons, libssl, libpng, libcurl, libusb, libreadline and pthread).

Change into the openiboot subfolder

For iPod Touch 1G, run: scons iPodTouch1G

For iPhone 2G, run: scons iPhone2G

For iPhone 3G, run: scons iPhone3G

For iPod Touch 2G, run: scons iPodTouch2G

For iPhone 3GS, run: scons iPhone3GS

For iPhone 4, run: scons iPhone4

For iPod Touch 4G, run: scons iPodTouch4G

For iPad 1G, run: scons iPad1G

For Apple TV 2G, run: scons aTV2G

Compile syringe: cd ../utils/syringe && make && cd ../../

Alternatively a Makefile has been provided in the openiboot subfolder should you prefer to use it this way - this is not covered by this README but is provided for your convenience should you wish to use it

Compile oibc: cd utils/oibc && make && cd ../../openiboot

If you're on linux, you'll need to install the following as /etc/udev/rules.d/51-android.rules:

SUBSYSTEM=="usb" ID_VENDOR_ID=="0bb4", MODE="0666"
SUBSYSTEM=="usb" ID_VENDOR_ID=="18d1", MODE="0666"
SUBSYSTEM=="usb" ID_VENDOR_ID=="05ac", MODE="0666"

Put your phone into recovery mode: hold home whilst powering on until you see the iTunes logo.

NOTE: For the 3GS, iPhone4, iPad and Apple TV 2G, you must put your device into DFU mode instead.

For iPhone 2G, iPhone 3G & iPod Touch 1G run (substituting device and revision with the actual device, for example: iphone_3g_openiboot.img3): ../utils/syringe/utilities/loadibec device_revision_openiboot.img3

For newer devices run: (substituting device and revision with the actual device, for example: iphone_4_openiboot.bin): ../utils/syringe/utilities/loadibec device_revision_openiboot.bin

You should now see openiBoot on your phone, use the volume buttons to scroll to the console icon, then press home

Run the client: ../utils/oibc/oibc

NOTE: You cannot install openiboot on an iPhone 4, iPad or new bootrom 3GS/iPT2G - you can only run it

You should now see the same output on your computer, as is on your phone's screen.

Type: install and press return

OpeniBoot will then be flashed to your device's NOR - This will take a while, your NOR will be backed up during this process, and can be found in the current directory as norbackup.dump.

As of version 0.3 OpeniBoot now has a grub-style configurable menu system, OpeniBoot looks for /boot/menu.lst at boot. Below is an example menu.lst - put it in /boot (This section will be expanded upon at a later date, when newer device ports are further ahead)

title iOS
auto

title Android
kernel "(hd0,1)/idroid/zImage" "console=tty root=/dev/ram0 init=/init rw"
initrd "(hd0,1)/idroid/android.img.gz"

title iX
kernel "(hd0,1)/iX/zImage" "console=tty root=/dev/ram0 init=/init rw"
initrd "(hd0,1)/iX/initrd.img.gz"

Please leave bug reports/pull requests in the Github tracker.

For anything else, we can be found lurking in #idroid-dev on irc.freenode.net