kinoute / hack-z370-hd3p-i5-8400 Goto Github PK

Hi,

My spec is Ventura on I5 8400 on Asus TUF 7370 Plus UHD 630

Thanks to you, I thought I found the right EFI setting for my kits but I got some scripts of kernel panic at the startup so still can't install it. I guess it's about the USB mapping.

Should I try to install it on Catalina with Opencore first and upgrade my way up to Ventura?

Maybe we have a different Motherboard so I just need to find out how to do USB mapping which is similar for mine? Pls help if you can. Thanks.

Cheers

I still can't fix this, no matter what Ethernet .kext I use or Power management options on macOS or in the BIOS.

Sometimes, when rebooting or waking up from sleep, Internet through Ethernet doesn't work for minutes. ping works but anything else doesn't work. Websites time out. It goes away after a few minutes by itself.

Any help appreciated.

Hi, i've used your setup on aZ370M D3H at first with a i3 processor. It worked fine so i swapped the processor for an i9 but then ran into some ussues. The cpu was utilised only half. When i looked into the bios it didn's list the processor, only previous models. So i'm trying to figure out what's wrong. Did you make the SSDT-PLUG manual or did you use the prebuilt?

I've followed the instructions and everything was working with Mojave (10.14.6). But after the update to Catalina (10.15.1) the ALC1220 is not working anymore. Did you update, too?

Hi, Firstly, thank you very much for the time and effort you put into this. I have the same main configuration that you have, everything works pretty well though, except that the 1920*1080 HIDPI resolution option cannot be applied to my display, which is a PHILIPS 4k 27inch one.

I tried the scripts from https://github.com/xzhih/one-key-hidpi and everything else I can search across the internet but failed anyway... Really frustrating.

So I came to ask for your help, did you come across the HIDPI issue? and how exactly can I fix it? Much appreciation.

Best Regards,
Ryan.

Hey have you managed to get sound working natively on your config? Thanks :)

This situation has occurred many times, when the continuous download data reaches about 20GB. At this time, the ping gateway is unreachable, and ping 127.0.0.1 is passable. You can reproduce this problem.
After the problem occurs, you must restart the computer to access the network. It's really depressing, because I can't always watch the download to restart the computer. Not sure if the kext driver is the problem?

Name: ethernet
   Type: Ethernet controller
   Bus: PCI
   Vendor ID: 0x8086
   Device ID: 0x15b8
   Subsystem Vendor ID: 0x1458
   Subsystem ID: 0xe000
   Revision ID: 0x0000
   BSD name: en0
   Kext name: IntelMausiEthernet.kext
   Location: /Library/Extensions/IntelMausiEthernet.kext
   Version: 2.4.0

Thanks for your legendary work, Any plans of upgrading to Sonoma?

Edit:
Update worked flawlessly with no changes.

would mind telling me how to enable IGPU?
i have a Gigabyte z370-hd3p board , with 1 hdmi 1 dvi and 1 vga port.
tried lot of things , the platform id is not quite right, hdmi to will cause purple screen.
thanks

Hi,

I followed your guide and was able to perform the initial setup, BUT only until 12%, got stuck. There was a reboot, the mac installer new menu item appeared, selected that and after a few seconds the computer rebooted. I tried again but this time the boot menu disappeared and Apple logo showed, few seconds black screen, reboot.

I have very similar setup:

• i5-8400
• 8GB RAM
• no discrete graphics card
• Gigabyte Z370M D3H mainboard
  I generated new Serial Number, SystemUUID and MLB.

Got any ideas what have I done wrong or what needs to be done?

Many thanks