Alive2 consists of several libraries and tools for analysis and verification of LLVM code and transformations. Alive2 includes the following libraries:
- Alive2 IR
- Symbolic executor
- LLVM → Alive2 IR converter
- Refinement check (aka optimization verifier)
- SMT abstraction layer
Included tools:
- Alive drop-in replacement
- Translation validation plugins for clang and LLVM's
opt
- Standalone translation validation tool:
alive-tv
(online) - Clang drop-in replacement with translation validation (
alivecc
andalive++
) - An LLVM IR interpreter that is UB precise (
alive-exec
)
For a technical introduction to Alive2, please see our paper from PLDI 2021.
Alive2 does not support inter-procedural transformations. Alive2 may produce spurious counterexamples if run with such passes.
To build Alive2 you need recent versions of:
export ALIVE2_HOME=$PWD
export LLVM2_HOME=$PWD/llvm-project
export LLVM2_BUILD=$LLVM2_HOME/build
git clone [email protected]:AliveToolkit/alive2.git
cd alive2
mkdir build
cd build
cmake -GNinja -DCMAKE_BUILD_TYPE=Release ..
ninja
If CMake cannot find the Z3 include directory (or finds the wrong one) pass
the -DZ3_INCLUDE_DIR=/path/to/z3/include
and -DZ3_LIBRARIES=/path/to/z3/lib/libz3.so
arguments to CMake.
Alive2's opt
and clang
translation validation requires a build of LLVM with
RTTI and exceptions turned on.
LLVM can be built targeting X86 in the following way. (You may prefer to add -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++
to the CMake step if your default compiler is gcc
.)
cd $LLVM2_HOME
mkdir build
cd build
cmake -GNinja -DLLVM_ENABLE_RTTI=ON -DLLVM_ENABLE_EH=ON -DBUILD_SHARED_LIBS=ON -DCMAKE_BUILD_TYPE=Release -DLLVM_TARGETS_TO_BUILD=X86 -DLLVM_ENABLE_ASSERTIONS=ON -DLLVM_ENABLE_PROJECTS="llvm;clang" ../llvm
ninja
Alive2 should then be configured and built as follows:
cd $ALIVE2_HOME/alive2/build
cmake -GNinja -DCMAKE_PREFIX_PATH=$LLVM2_BUILD -DBUILD_TV=1 -DCMAKE_BUILD_TYPE=Release ..
ninja
Translation validation of one or more LLVM passes transforming an IR file on Linux:
$LLVM2_BUILD/bin/opt -load $ALIVE2_HOME/alive2/build/tv/tv.so -load-pass-plugin $ALIVE2_HOME/alive2/build/tv/tv.so -tv -instcombine -tv -o /dev/null foo.ll
For the new pass manager:
$LLVM2_BUILD/bin/opt -load $ALIVE2_HOME/alive2/build/tv/tv.so -load-pass-plugin $ALIVE2_HOME/alive2/build/tv/tv.so -passes=tv -passes=instcombine -passes=tv -o /dev/null $LLVM2_HOME/llvm/test/Analysis/AssumptionCache/basic.ll
On a Mac with the old pass manager:
$LLVM2_BUILD/bin/opt -load $ALIVE2_HOME/alive2/build/tv/tv.dylib -load-pass-plugin $ALIVE2_HOME/alive2/build/tv/tv.dylib -tv -instcombine -tv -o /dev/null foo.ll
On a Mac with the new pass manager:
$LLVM2_BUILD/bin/opt -load $ALIVE2_HOME/alive2/build/tv/tv.dylib -load-pass-plugin $ALIVE2_HOME/alive2/build/tv/tv.dylib -passes=tv -passes=instcombine -passes=tv -o /dev/null $LLVM2_HOME/llvm/test/Analysis/AssumptionCache/basic.ll
You can run any pass or combination of passes, but on the command line
they must be placed in between the two invocations of the Alive2 -tv
pass.
Translation validation of a single LLVM unit test, using lit:
$LLVM2_BUILD/bin/llvm-lit -vv -Dopt=$ALIVE2_HOME/alive2/build/opt-alive.sh $LLVM2_HOME/llvm/test/Transforms/InstCombine/canonicalize-constant-low-bit-mask-and-icmp-sge-to-icmp-sle.ll
The output should be:
-- Testing: 1 tests, 1 threads --
PASS: LLVM :: Transforms/InstCombine/canonicalize-constant-low-bit-mask-and-icmp-sge-to-icmp-sle.ll (1 of 1)
Testing Time: 0.11s
Expected Passes : 1
To run translation validation on all the LLVM unit tests for IR-level transformations:
$LLVM2_BUILD/bin/llvm-lit -s -Dopt=$ALIVE2_HOME/alive2/build/opt-alive.sh $LLVM2_HOME/llvm/test/Transforms
We run this command on the main LLVM branch each day, and keep track of the results here. To detect unsound transformations in a local run:
fgrep -r "(unsound)" $ALIVE2_HOME/alive2/build/logs/
This plugin tries to validate every IR-level transformation performed by LLVM. Invoke the plugin like this:
clang -O3 $LLVM2_HOME/clang/test/C/C99/n505.c -S -emit-llvm \
-fpass-plugin=$ALIVE2_HOME/alive2/build/tv/tv.so \
-Xclang -load -Xclang $ALIVE2_HOME/alive2/build/tv/tv.so
Or, more conveniently:
$ALIVE2_HOME/alive2/build/alivecc -O3 -c $LLVM2_HOME/clang/test/C/C99/n505.c
$ALIVE2_HOME/alive2/build/alive++ -O3 -c $LLVM2_HOME/clang/test/Analysis/aggrinit-cfg-output.cpp
The Clang plugin can optionally use multiple cores. To enable parallel
translation validation, add the -mllvm -tv-parallel=XXX
command line
options to Clang, where XXX is one of two parallelism managers
supported by Alive2. The first (XXX=fifo) uses alive-jobserver: for
details about how to use this program, please consult its help output
by running it without any command line arguments. The second
parallelism manager (XXX=unrestricted) does not restrict parallelism
at all, but rather calls fork() freely. This is mainly intended for
developer use; it tends to use a lot of RAM.
Use the -mllvm -tv-report-dir=dir
to tell Alive2 to place its output
files into a specific directory.
The Clang plugin's output can be voluminous. To help control this, it
supports an option to reduce the amount of output (-mllvm -tv-quiet
).
Our goal is for the alivecc
and alive++
compiler drivers to be
drop-in replacements for clang
and clang++
. So, for example, they
try to detect when they are being invoked as assemblers or linkers, in
which case they do not load the Alive2 plugin. This means that some
projects cannot be built if you manually specify command line options
to Alive2, for example using -DCMAKE_C_FLAGS=...
. Instead, you can
tell alivecc
and alive++
what to do using a collection of
environment variables that generally mirror the plugin's command line
interface. For example:
ALIVECC_PARALLEL_UNRESTRICTED=1
ALIVECC_PARALLEL_FIFO=1
ALIVECC_DISABLE_UNDEF_INPUT=1
ALIVECC_DISABLE_POISON_INPUT=1
ALIVECC_SMT_TO=timeout in milliseconds
ALIVECC_SUBPROCESS_TIMEOUT=timeout in seconds
ALIVECC_OVERWRITE_REPORTS=1
ALIVECC_REPORT_DIR=dir
If validating the program takes a long time, you can batch optimizations to
verify.
Please set ALIVECC_BATCH_OPTS=1
and run alivecc
/alive++
.
This tool has two modes.
In the first mode, specify a source (original) and target (optimized)
IR file. For example, let's prove that removing nsw
is correct
for addition:
$ alive-tv src.ll tgt.ll
----------------------------------------
define i32 @f(i32 %a, i32 %b) {
%add = add nsw i32 %b, %a
ret i32 %add
}
=>
define i32 @f(i32 %a, i32 %b) {
%add = add i32 %b, %a
ret i32 %add
}
Transformation seems to be correct!
Flipping the inputs yields a counterexample, since it's not correct, in general,
to add nsw
.
If you are not interested in counterexamples using undef
, you can use the
command-line argument -disable-undef-input
.
In the second mode, specify a single unoptimized IR file. alive-tv will optimize it using an optimization pipeline similar to -O2, but without any interprocedural passes, and then attempt to validate the translation.
For example, as of February 6 2020, the release/10.x
branch contains
an optimizer bug that can be triggered as follows:
$ cat foo.ll
define i3 @foo(i3) {
%x1 = sub i3 0, %0
%x2 = icmp ne i3 %0, 0
%x3 = zext i1 %x2 to i3
%x4 = lshr i3 %x1, %x3
%x5 = lshr i3 %x4, %x3
ret i3 %x5
}
$ alive-tv foo.ll
----------------------------------------
define i3 @foo(i3 %0) {
%x1 = sub i3 0, %0
%x2 = icmp ne i3 %0, 0
%x3 = zext i1 %x2 to i3
%x4 = lshr i3 %x1, %x3
%x5 = lshr i3 %x4, %x3
ret i3 %x5
}
=>
define i3 @foo(i3 %0) {
%x1 = sub i3 0, %0
ret i3 %x1
}
Transformation doesn't verify!
ERROR: Value mismatch
Example:
i3 %0 = #x5 (5, -3)
Source:
i3 %x1 = #x3 (3)
i1 %x2 = #x1 (1)
i3 %x3 = #x1 (1)
i3 %x4 = #x1 (1)
i3 %x5 = #x0 (0)
Target:
i3 %x1 = #x3 (3)
Source value: #x0 (0)
Target value: #x3 (3)
Summary:
0 correct transformations
1 incorrect transformations
0 errors
Please keep in mind that you do not have to compile Alive2 in order to try out alive-tv; it is available online: https://alive2.llvm.org/ce/
This tool uses Alive2 as an interpreter for an LLVM function. It is currently highly experimental and has many restrictions. For example, the function cannot take inputs, cannot use memory, cannot depend on undefined behaviors, and cannot include loops that execute too many iterations.
The alive-tv tool and the Alive2 translation validation opt plugin support using an external Redis server to avoid performing redundant queries. This feature is not intended for general use, but rather to speed up certain systematic testing workloads that perform a lot of repeated work. When it hits a repeated refinement check, it prints "Skipping repeated query" instead of performing the query.
If you want to use this functionality, you will need to manually start and stop, as appropriate, a Redis server instance on localhost. Alive2 should be the only user of this server.
- Select a failing test file. It may be convenient to choose one whose path is given at the beginning of a log file containing the text "(unsound)" as above; this is guaranteed to contain an unsoundness report. Many log files, however, contain only “Source: <stdin>” rather than a file path; the names of these files begin with “in_”.
- Do a verbose run of Lit for just that file, with the
opt
option--print-after-all
appended, e.g.:
$LLVM2_BUILD/bin/llvm-lit -vva "-Dopt=$ALIVE2_HOME/alive2/build/opt-alive.sh --print-after-all" $LLVM2_HOME/llvm/test/Transforms/InstCombine/insert-const-shuf.ll
- Collect Lit’s LLVM IR terminal output, for comparison with Alive2’s Alive2 IR output in the log file indicated by “Report written to…”. Sometimes the Lit output may not contain useful LLVM IR, in which case executing the output RUN command separately may give better results.
- The Alive2 unsoundness report in the corresponding log file will have two versions of the misoptimized function. The Alive2 IR function body may indicate the problem to a human, but for the Alive2 Compiler Explorer instance you will need LLVM IR. Search for the function name in the terminal output.
- Copy the first function definition and necessary declarations to https://alive2.llvm.org/ce/. Without a second version of the function to compare, it just runs some standard optimizations; if it reports an error, your fork’s optimizations are not to blame.
- If there is a second, unsound, function definition in the LLVM IR terminal output, copy it and necessary declarations to Compiler Explorer, and change the second function name.
- If it now reports a miscompilation, presumably your fork has a bug, demonstrated by the provided examples.
- Check the “LLVMConfig.cmake” and “CMAKE_PREFIX_PATH” output from CMake in
case of build problems. CMake may look for configuration information in old
installations of LLVM, e.g., under
/opt/
, if these are not set properly. - Some combinations of Clang and MacOS versions may give link warnings “-undefined dynamic_lookup may not work with chained fixups,” and runtime errors with “symbol not found in flat namespace.” Setting CMAKE_OSX_DEPLOYMENT_TARGET as a cache entry to 11.0 or less at the beginning of CMakeLists.txt may work around this.
- Building for Translation Validation requires enabling
BUILD_SHARED_LIBS
. For LLVM forks not normally built with the option, this may interfere with CMake files’ use ofUSEDLIBS
andLLVMLIBS
and perhapsdd_llvm_target
. - Building for Translation Validation is tightly coupled to LLVM top of tree source. Building a fork with older source may require reverting to the corresponding Alive2 commit. This in turn may require experimentation with Clang versions and vendors.
- Building older source on an up-to-date machine may require adjustments. For
example, the now-deleted file
scripts/rewritepass.py
depended on the deprecated Python 2; update the shebang line topython3
.
BugList.md shows the list of LLVM bugs found by Alive2.