Git Product home page Git Product logo

dedsecimsi's Introduction

alt text

DEDSECIMSI is python based tool which use for capturing imsi numbers and sms and also you able to customize your capturing and it's make easy to capture sms and imsi numbers for those who not have much knowledge about gsm packets capturing.

Disclaimer :This program was made to understand how GSM network works. Not for bad hacking ! We are not responsible for any illegal activity !

Setup

Install DEDSECIMSI :

git clone https://github.com/0xbitx/dedsecimsi.git
pip3 install pyshark flask flask_socketio sqlite3

Install Gr GSM : ( For receiving GSM transmissions )

sudo add-apt-repository -y ppa:ptrkrysik/gr-gsm
sudo apt update
sudo apt install gr-gsm

If gr-gsm failled to setup. Than follow those this : https://github.com/ptrkrysik/gr-gsm/wiki/Installation

Install Kalibrate : ( For finding frequencies )

apt-get install kalibrate-rtl

OR

sudo apt install build-essential libtool automake autoconf librtlsdr-dev libfftw3-dev
git clone https://github.com/steve-m/kalibrate-rtl
cd kalibrate-rtl
./bootstrap && CXXFLAGS='-W -Wall -O3'
./configure
make
sudo make install

Usage

You need gsm frequency on which you capture sms or imsi. By using kalibrate you will get all your near gsm base stations frequencies.

kal -s GSM900
kal: Scanning for GSM-900 base stations.
GSM-900:
chan: 4 (935.8MHz + 320Hz)	power: 1829406.95
chan: 11 (937.2MHz + 308Hz)	power: 4540354.88
...

Now you need to capture gsm traffic using gr-gsm on frequency of your any gsm base station which you get from kalibrate.

grgsm_livemon -f <your_frequency>M

Example :

grgsm_livemon -f 935.8M

if you see output that's mean you getting gsm packets than continue other setps else change frequency.

  ```
  2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
  2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
  2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
  2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
  ...

Now every thing is ready you can start now capturing sms or imsi numbers using dedsec. You able to run imsi catcher and sms sniffer both at same time using 2 seprate terminal for capture imsi numbers and sms both at same time.

cd <your dedsecimsi folder> #Example cd dedsecimsi

Capturing IMSI :

Run this command to quick start imsi capturing.

python imsi.py

options:

python imsi.py -h                                                                                           

Usage: imsi.py: [options]

Options:

-h, --help            show this help message and exit

-i IFACE, --iface=IFACE  Interface (default : lo)

-p PORT, --port=PORT  Port (default : 4729)

-m IMSI, --imsi=IMSI  IMSI to track (default : None, Example: 123456789101112)

-s SAVE, --save=SAVE  Save all imsi numbers to sqlite file. (default : None)

For save all imsi numbers with details in sqlite file.(It's will show you output on screen and also save in file)

sudo python imsi.py -s example.db

For capture only specific imsi. (It's will show you only your given imsi result)

python imsi.py -m imsi_here (Example: sudo python imsi.py -m 123456789101112)

Capturing SMS :

Run this command to quick start sms capturing.

python sms.py

Options :

python sms.py -h                                                                                           

Usage: sms.py: [options]

Options:

-h, --help                show this help message and exit

-i IFACE, --iface=IFACE   Interface (default : lo)

-p PORT, --port=PORT      Port (default : 4729)

-n NUMBER, --number=NUMBER  Phone number (default : None)

-s SAVE, --save=SAVE  Save all text messages to sqlite file. (default: None)

For save all sms in sqlite file.(It's will show you output on screen and also save in file)

sudo python sms.py -s example.db

For capture only specific phone number sms. (It's will show you only your given phone number result)

sudo python sms.py -n phone_number_here (Example: sudo python sms.py -n 09095676722)

Requirements:

linux operating system (kali linux) rtl-sdr (RTL2832U) with antenna

rtl-sdr device available on lazada:

name of product: RTL-SDR Blog RTL SDR V3 R820T2 RTL2832U 1PPM TCXO SMA RTLSDR Software Receiver Defined Radio

this project is currently not maintained.

dedsecimsi's People

Contributors

0xbitx avatar

Watchers

James Cloos avatar

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    ๐Ÿ–– Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. ๐Ÿ“Š๐Ÿ“ˆ๐ŸŽ‰

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google โค๏ธ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.