The following tasks did not reset the watchdog in time about ka-radio32 HOT 5 CLOSED

Hi @karawin

Is there any reason why the message is produced?

from ka-radio32.

It is a task watchdog. It ca happen time to time but it show a bad loop in a task.

from ka-radio32.

It's happening to me very often. Regardless of how many times you reset it, after entering the project control page again, the equalizer appears unconfigured and when you change stations or try to update the system, it generates again the error is immersed in the error cycle

E (75154) task_wdt: Task watchdog got triggered. The following tasks did not reset the watchdog in time:
E (75154) task_wdt: - IDLE1 (CPU 1)
E (75154) task_wdt: Tasks currently running:
E (75154) task_wdt: CPU 0: tiT
E (75154) task_wdt: CPU 1: timerTask
E (80154) task_wdt: Task watchdog got triggered. The following tasks did not reset the watchdog in time:
E (80154) task_wdt: - IDLE1 (CPU 1)
E (80154) task_wdt: Tasks currently running:
E (80154) task_wdt: CPU 0: clientTask
E (80154) task_wdt: CPU 1: timerTask
E (85154) task_wdt: Task watchdog got triggered. The following tasks did not reset the watchdog in time:
E (85154) task_wdt: - IDLE1 (CPU 1)
E (85154) task_wdt: Tasks currently running:
E (85154) task_wdt: CPU 0: clientTask
E (85154) task_wdt: CPU 1: timerTask
E (90154) task_wdt: Task watchdog got triggered. The following tasks did not reset the watchdog in time:
E (90154) task_wdt: - IDLE1 (CPU 1)
E (90154) task_wdt: Tasks currently running:
E (90154) task_wdt: CPU 0: clientTask
E (90154) task_wdt: CPU 1: timerTask

from ka-radio32.

Is it possible to have a buffer for the stream, so that the transmission cuts of the signal are reduced by having small fluctuations in the intensity of the Wi-Fi signal ?. I have an AUDIOCAST M5 and it implements some two seconds of buffer, which gives it very good stability in the transmission of the stream

from ka-radio32.

It was in the past ;-)
I close it

from ka-radio32.