kachurovskiy / megaels Goto Github PK

question on tables.html - and in general - on my x axis how do I account for the gear ratio from the x-stepper to cross slide screw pitch.
From your thingverse cross slide - it looks like you have a 3x - 54/18 but I'm not seeing that in the digital_feed_7e2 or tables.html code that you have posted. I have a 1mm cross slide but an odd 77/13. I started my els about a year ago and just started working on it again last month. I found your github in the last two weeks - so thanks for posting what you have. I'm not that good with github - so not sure how to correctly tag this

hello to all I have a small problem with the cone option for example when I want to make a 45 degree cone it is not 45 degrees however the cross carriage moves well 50 m minutes as well as the z axis everything is well entered in the code as it should be my screw of the crossed axis is 1 mm the screw of the z axis is 2 mm the cross axis driver is set to 400 the z axis driver is set to 800 I have a gear ratio on the cross axis of 3:1. I find that on the automatic threading mode it takes form big passes

Again sorry for the translation if it is not good I do with Google 😉 thank you

If switch from tachometer to another mode and then switch mode back - values become incorrect.
Also it will be good to decrease refresh rate of tachometer values

.

In the BOM you have "4 1kOhm resistor arrays with 9 resistors each" but the part that is linked: (https://www.aliexpress.com/item/32840103807.html) has 9 PIN which is 8 resistors and a common isn't it? I hope the link is the correct one as this is what I have ordered :) Just checked and the circuit diagram has the 8 resistors and a common pin.

Tony

I come to you because I want to know the different parameters that must be set in the code and what are the different settings for in the photo below. For example:

SCREW_X (42) ??
MOTOR_X_STEP_PER_REV ??
REBOUND_X ??
REBOUND_Z ??

my turn and the same as kachurovskiy if I do the calculation of the x axis so 54/18= 3. (One complete engine revolution =200) So 3x200=600 MOTOR_X_STEP_PER_REV=600??

As soon as I change its parameters MAX_FEED starts to growl He and yet set to 20

I hope here someone can help me thank you

I'm not getting any Beeps from the Megaels, I assumed that the beeper type is the sort that gives a constant beep sound while power is applied, not the sort that you need to modulate the power to get a frequency? It is polarised which I am sure I got the correct way round. Is there anything else I am missing? Did I assume wrong about the type of Beeper?