Git Product home page Git Product logo

m5stack-wallet's Introduction

BUIDL Wallet

If you have an m5stack, here are instructions to compile micropython firmware that includes all of Trezor's crypto code available as Python objects:

Install these prerequisites: https://github.com/loboris/MicroPython_ESP32_psRAM_LoBo/wiki/build

Build the custom Micropython firmware that includes trezor-crypto bindings:

git clone [email protected]:justinmoon/MicroPython_ESP32_psRAM_LoBo.git
cd MicroPython_ESP32_psRAM_LoBo/MicroPython_BUILD/
./BUILD.sh -v
./BUILD.sh -v flash

In another window run

git clone [email protected]:justinmoon/buidl-wallet.git
python3 -m pip install rshell
make sync

Development Notes

make repl

  • ctrl-d will restart the device
  • ctrl-a-d will exit the repl

Serial demo

Plug wires into the usb-to-uart:

  • rx <-> 17
  • tx <-> 16
  • gnd <-> gnd

(note: rx & tx criss-cross)

On host machine run cli.py <port>

Sync make folder=serial sync

The m5stack should start printing first 256 bytes every second

Bugs

TODOS

failed to access /dev/ttyUSB0
$ make folder=src sync
rshell --port /dev/ttyUSB0 --timing --buffer-size=32 rsync --mirror --verbose ./src  /flash
Connecting to /dev/ttyUSB0 ...
failed to access /dev/ttyUSB0
make: *** [Makefile:20: sync] Error
I encounter this one when I try to re-sync files
  • just now unplugging and plugging back in solved it
  • this issue is on github dhylands/rshell#68
$ make folder=src sync
rshell --port /dev/ttyUSB0 --timing --buffer-size=32 rsync --mirror --verbose ./src  /flash
Connecting to /dev/ttyUSB0 ...
b'\r\nInternal FS (SPIFFS): Mounted on partition \'internalfs\' [size: 2359296; Flash address: 0x1C0000]\r\n----------------\r\nFilesystem size: 2161152 B\r\n           Used: 18944 B\r\n           Free: 2142208 B\r\n----------------\r\nbip39 entropy= b\'\\x06^\\x9d\\xdeh\\x03\\x03\\x15\\xd2\\x11-\\xb0\\xa4<\\xad#j\\t_@\\x8b}\\xc7\\x9eW\\xb5\\xc8\\xa5V\\x05\\xda\\xb8\'\r\nmnemonic= alien visual jealous source coral memory embark certain radar capable clip egg party quick acquire hurry shy verify uniform mule fever actual helmet board\r\nseed= b"\\xf3U\\xd4;\\x92*\\xbbd1#\\xcc\\x1d4\\xb5\\x9d.1\\x8a\\xe2\\r\\xfc\\xf2\\x19*\\x9a\\x1f\\x90\\x03U\\x81\\x05$\\xdc\\x07\\xa4\\x88O\\xf3\\xfb2\\xb0\\xbe\\xbe\\x90A\\xc3\\x04\'\\xb8v%\\xbe\\xed\\r\\xbe\\xd2wR\\xcfZ\\xb5\\xa5\\xf9 "\r\nsaved seed to disk\r\nread seed from disk\r\nderiving node\r\nb"\\xf3U\\xd4;\\x92*\\xbbd1#\\xcc\\x1d4\\xb5\\x9d.1\\x8a\\xe2\\r\\xfc\\xf2\\x19*\\x9a\\x1f\\x90\\x03U\\x81\\x05$\\xdc\\x07\\xa4\\x88O\\xf3\\xfb2\\xb0\\xbe\\xbe\\x90A\\xc3\\x04\'\\xb8v%\\xbe\\xed\\r\\xbe\\xd2wR\\xcfZ\\xb5\\xa5\\xf9 "\r\nsigning...\r\nverifies? True\r\nMicroPython ESP32_LoBo_v3.2.24 - 2018-09-06 on ESP32 board with ESP32\r\nType "help()" for more information.\r\n>>> '
Traceback (most recent call last):
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1186, in connect
    ip_address = socket.gethostbyname(port)
socket.gaierror: [Errno -2] Name or service not known

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/justin/dev/buidl-wallet/venv/bin/rshell", line 11, in <module>
    sys.exit(main())
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/command_line.py", line 4, in main
    rshell.main.main()
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 2712, in main
    real_main()
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 2674, in real_main
    connect(args.port, baud=args.baud, wait=args.wait, user=args.user, password=args.password)
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1192, in connect
    connect_serial(port, baud=baud, wait=wait)
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1216, in connect_serial
    dev = DeviceSerial(port, baud, wait)
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1462, in __init__
    Device.__init__(self, pyb)
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1265, in __init__
    self.has_buffer = self.remote_eval(test_buffer)
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1379, in remote_eval
    return eval(self.remote(func, *args, **kwargs))
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1357, in remote
    self.pyb.enter_raw_repl()
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/pyboard.py", line 187, in enter_raw_repl
    raise PyboardError('could not enter raw repl')
rshell.pyboard.PyboardError: could not enter raw repl
make: *** [Makefile:20: sync] Error 1
timed out or error in transfer to remote
$ make folder=src sync
rshell --port /dev/ttyUSB0 --timing --buffer-size=32 rsync --mirror --verbose ./src  /flash
Connecting to /dev/ttyUSB0 ...
Removing /flash/seed.txt
Removing /flash/boot.py
/home/justin/dev/buidl-wallet/src/helpers.py is newer than /flash/helpers.py - copying
/home/justin/dev/buidl-wallet/src/tx.py is newer than /flash/tx.py - copying
/home/justin/dev/buidl-wallet/src/main.py is newer than /flash/main.py - copying
timed out or error in transfer to remote
another rshell.pyboard.PyboardError

Come to think of itt .... I'm not actually using a pyboard ... do they mean "micropython" when they say "pyboard" or is the wrong code being executed?

$ make reset
rshell --port /dev/ttyUSB0 --timing --buffer-size=32 repl "~ import machine ~ machine.reset()~"
Connecting to /dev/ttyUSB0 ...
Traceback (most recent call last):
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1186, in connect
    ip_address = socket.gethostbyname(port)
socket.gaierror: [Errno -2] Name or service not known

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/justin/dev/buidl-wallet/venv/bin/rshell", line 11, in <module>
    sys.exit(main())
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/command_line.py", line 4, in main
    rshell.main.main()
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 2712, in main
    real_main()
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 2674, in real_main
    connect(args.port, baud=args.baud, wait=args.wait, user=args.user, password=args.password)
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1192, in connect
    connect_serial(port, baud=baud, wait=wait)
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1216, in connect_serial
    dev = DeviceSerial(port, baud, wait)
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1462, in __init__
    Device.__init__(self, pyb)
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1274, in __init__
    self.root_dirs = ['/{}/'.format(dir) for dir in self.remote_eval(listdir, '/')]
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1379, in remote_eval
    return eval(self.remote(func, *args, **kwargs))
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/main.py", line 1363, in remote
    output, _ = self.pyb.follow(timeout=20)
  File "/home/justin/dev/buidl-wallet/venv/lib/python3.7/site-packages/rshell/pyboard.py", line 208, in follow
    raise PyboardError('timeout waiting for first EOF reception')
rshell.pyboard.PyboardError: timeout waiting for first EOF reception
make: *** [Makefile:29: reset] Error 1

2019 notes

This will show the ports:

python -m serial.tools.list_ports

m5stack-wallet's People

Contributors

gustavorssilva avatar justinmoon avatar mcauser avatar tamagotono avatar tuupola avatar

Stargazers

avatar avatar avatar avatar avatar avatar avatar avatar avatar

Watchers

avatar avatar avatar avatar avatar avatar avatar

Forkers

nwilson1412 cbrightly ruankranz gustavorssilva learn-to-code-bitcoin diop

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.