junkicide / din Goto Github PK

We need to make a bootable usb key that boots into din. Turn any computer
into a musical instrument. The key will also have development tools to
continue development of din on that computer.

Resonators can be added in the strength editor.
Want ability to delete 1 or more resonators so that the user can freely add
resonators to see how they affect the sound and delete them later if they
arent good.  Right now he can add but not delete.

Need separate help file for each command available in din. This will allow
detailed help & examples. help right now is mostly available as one-liners
which is not enough.  Option for both would be good too.

after pressing 2 and getting into the waveform editor, my mouse gestures 
captured but i want to 
stop them all.

16:32 < aleij_> i just read f1
16:32 < aleij_> is there a way to stop all mouse captures at once?
16:32 <@jag> theres bugs in that help file unfortunately
16:32 <@jag> hehe no :D
16:32 <@jag> file an issue 
16:33 <@jag> its a game catching the moving ones
16:33 <@jag> i thot it was funny so i left it :)
16:33 <@jag> that has to be there at some point
16:33 < aleij_> very difficult to cathc them
16:33 <@jag> wait for them to come "home"
16:33 <@jag> their slowest point
16:33 <@jag> and press f9 i think
16:34 < aleij_> yes
16:34 < aleij_> im shooting fnines
16:34 <@jag> all the keys are rigged in din
16:34 < aleij_> not an easy target

What steps will reproduce the problem?
1.install din(i tried the deb package and to compile it from source. in both 
cases the problam remain) 
2.start din 
3.Segmentation fault 

What is the expected output? What do you see instead?

yaniv@yaniv:~$ din
<<< using data files in /home/yaniv/.din/ >>>
<<< loading globals, done >>>
<< loading audio prefs from: /home/yaniv/.din/jack_prefs, done. >>>
*** connecting to JACK server ***
+++ connected to JACK server as: din +++
+++ opened input & output ports +++
+++ opened MIDI port +++
+++ sample rate is 44100 Hz +++
+++ opened JACK connection +++
<<< loading font from: /home/yaniv/.din/jag.fnt, done. >>>
<<< initialising console, done >>>
<<< loading curve editor settings from: /home/yaniv/.din/delay.ed, done >>>
+++ FFT setup complete +++ 
<<< loaded 102 curves from: waveforms.lib >>>
<<< loading curve editor settings from: /home/yaniv/.din/compressor.ed, done >>>
<<< loading curve editor settings from: /home/yaniv/.din/octave-shift.ed, done 
>>>
<<< loaded 15 curves from: octave-shift-patterns.lib >>>
<<< loading curve editor settings from: /home/yaniv/.din/drone-modulation.ed, 
done >>>
<<< loading curve editor settings from: /home/yaniv/.din/waveform1.ed, done >>>
<<< loading curve editor settings from: /home/yaniv/.din/drone.ed, done >>>
<<< loading curve editor settings from: /home/yaniv/.din/gater.ed, done >>>
<<< loaded 45 curves from: gater-patterns.lib >>>
<<< loading curve editor settings from: /home/yaniv/.din/modulation.ed, done >>>
<<< loading curve editor settings from: /home/yaniv/.din/waveform2.ed, done >>>
<<< loading curve editor settings from: /home/yaniv/.din/attack.ed, done >>>
<<< loading curve editor settings from: /home/yaniv/.din/decay.ed, done >>>
<<< loaded 7 curves from: attack.lib >>>
<<< loaded 6 curves from: decay.lib >>>
<<< loading curve editor settings from: /home/yaniv/.din/velocity.ed, done >>>
<<< loaded 9 curves from: velocity.lib >>>
<<< loading curve editor settings from: /home/yaniv/.din/morse-code.ed, done >>>
+++ created an IRC session +++
*** creating Tcl interpreter ***
+++ added 45 din commands to the Tcl interpreter +++
+++ created Tcl interpreter +++
<<< loading curve editor settings from: /home/yaniv/.din/font.ed, done >>>
<<< mouse parameters:  acceleration:  0/1    threshold:  0 >>> 
<<< loading Tcl init script: done. +++
+++ saved ranges in /home/yaniv/.din/.ranges +++
+++ saved drones in: /home/yaniv/.din/.drone +++
!!! couldnt load custom tuning from: /home/yaniv/.din/blues.intervals; will use 
defaults. +++
*** setting up ranges ***
<< loading ranges from: /home/yaniv/.din/blues.ranges
!!! couldnt load range pos from /home/yaniv/.din/blues.ranges, will use 
defaults +++
+++ setup ranges +++
<<< loading font from: /home/yaniv/.din/jag.fnt, done. >>>
+++ opened GLX visual 0x2b for rendering +++
+++ viewport: 640 480 +++
Cannot read socket fd = 5 err = Interrupted system call
+++ sample rate is 44100 Hz +++
+++ setup audio callbacks (sample rate, buffer size & midi connection) +++
Segmentation fault (core dumped)


And also jack output:

Mon Aug  6 12:03:58 2012: New client 'din' with PID 2314
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: JackEngine::XRun: client = din was 
not run: state = 1�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
12:03:58.819 JACK connection graph change.
12:03:58.875 XRUN callback (1).
12:03:58.882 JACK connection change.
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: 
JackAudioDriver::ProcessGraphAsyncMaster: Process error�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot read socket fd = 53 err = 
Connection reset by peer�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: NotifyClient fails name = din event = 
2 val1 = 0 val2 = 0�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 52 err = 
Broken pipe�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 53 err = 
Broken pipe�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 53 err = 
Broken pipe�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 53 err = 
Broken pipe�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 53 err = 
Broken pipe�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 53 err = 
Broken pipe�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 53 err = 
Broken pipe�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 53 err = 
Broken pipe�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot read socket fd = 53 err = 
Broken pipe�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Could not read result�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: NotifyClient fails name = din event = 
18 val1 = 0 val2 = 0�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 4294967295 
err = Bad file descriptor�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 4294967295 
err = Bad file descriptor�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 4294967295 
err = Bad file descriptor�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 4294967295 
err = Bad file descriptor�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 4294967295 
err = Bad file descriptor�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 4294967295 
err = Bad file descriptor�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot write socket fd = 4294967295 
err = Bad file descriptor�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Cannot read socket fd = -1 err = Bad 
file descriptor�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: NotifyClient fails name = din event = 
18 val1 = 1 val2 = 0�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Failed to find port 'din:midi' to 
destroy�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Failed to find port 'din:L' to 
destroy�[0m
Mon Aug  6 12:03:58 2012: �[1m�[31mERROR: Failed to find port 'din:R' to 
destroy�[0m
Mon Aug  6 12:03:58 2012: Client 'din' with PID 2314 is out



What version of the product are you using? On what operating system?
din 3.5
Ubuntu Studio 12.0 amd64

10:34 < dspstv> i spent yesterday hours trying to record my din session
10:34 < dspstv> vmix didnt do it
10:34 < dspstv> gstreamer refused also
10:35 < dspstv> sox only got sound via sound card inputs
10:35 < jag> and we use oss, a basic api
10:35 < dspstv> so i had to go analogic with cables
10:35 < jag> they all like complicated :)
10:35 < dspstv> jag, i think is possible to tell oss to save to file
10:36 < jag> actually saving is not difficult at all
10:36 < jag> libsndfile
10:36 < jag> can save samples
10:36 < jag> could file an issue :)
10:36 < dspstv> deal!

What steps will reproduce the problem?
1. I try to install the ubuntu .deb file 
2. It's compiled for i386
3. sad panda

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?

din_1.0.6-ubuntu-planktum.deb

Ubuntu Studio 64bit 10.04 LTS - the Lucid Lynx

Please provide any additional information below.

send command notation without arguments to a din bot. crashes din. usually.
not always. so this is tricky.

Make a library of sound settings that can create different 'sounds' when
played with the keyboard, mouse or a music controller.  This makes it very
friendly for beginners to get into din and explore its potential.

Support MIDI protocol and in consequence MIDI controllers. Especially a
MIDI keyboard with a bunch of sliders, knobs and buttons.

when I use set-var dmv 0 it never silences the drones, instead setting the dmv 
a random number. I also want to use set-var with the start-end patch to map dmv 
to a slider so I do

assign 1 0 1 {sv dmv}

but it still doesn't work.

tokenizer.o -MD -MP -MF .deps/tokenizer.Tpo -c -o tokenizer.o tokenizer.cc
tokenizer.cc: In member function ‘tokenizer& tokenizer::operator>>(float&)’:
tokenizer.cc:49: error: ‘atof’ was not declared in this scope
tokenizer.cc: In member function ‘tokenizer& tokenizer::operator>>(int&)’:
tokenizer.cc:55: error: ‘atoi’ was not declared in this scope
make[1]: *** [tokenizer.o] Error 1

same as last bug report
format key as fat32
downloaded new din iso
burn to key using unetbootin
try to boot from it on Dell laptop
get as far as the Launch din window
doesn't boot

Support the computer keyboard as a music making device. Keys assigned to
notes and other audio parameters in din.

anything more will crash din.

will it be possible to have some sort of way to save the last settings one had 
before closing din?
i know din restores some of it but not all, i wont mind having different .din 
folders depending on the date one used it but the idea is to be able to get 
back to some sound one had the last time din was used.

need nearest_note, hz2step commands

nearest_note <frequency> returns note value eg., nearest_note 261 gives C.

hz2step <frequency> <sampling_rate> gives step for use in waveform stepping

when I use the start-end patch the get-val function is missing so I have to 
manually edit the patch for it to work. Please fix.

What steps will reproduce the problem?
1. formatted usb to fat32
2. rebooted laptop 
3. Unetbootin comes up with Launch din
4. select that item in menu
5. nothing happens

What is the expected output?
to launch din synth


What do you see instead?
no action


What version of the product are you using? On what operating system?

my Linux audio perf config:
Dell Studio 15 Core2 Duo 2.0GHz 3G-RAM
Ubuntu 9.04
kernel 2.6.28.19-generic
jackd version 0.116.1 tmpdir /dev/shm protocol 24
Ardour 2.8.2
Pd version 0.41-4extended
USB iMic audio interface
Korg nanoKontrol
cpufreq-set - both cpu's are set to 2.0GHz and userspace

Please provide any additional information below.

I'd like to be able to set the curves in a curve library outside the 
curve-editor screen, e.g.

"set-curve drone 2" would set the curve of the drone to the second one in the 
library.

This would also make it possible to assign curves to midi signals.

I think i remember those were once the commands to start listening to OSC 
messages from din.. was this removed? or did the syntax changed?
tx

is there a way to query via OSC the size of the keyboard so to now how to 
address its coordinates remotely? also, will there be a way to tell din to 
rezise the keyboard to a particular set of dimensions.

this is not just in regards to having a jam across the network but to have 
lets say puredata sending OSC pointer coordinates.

hope is clear.

many hotkeys are not valid on non US keyboards, thus making the program barely 
usable for non USA citizens; it would be essential for us to have the 
possibility to redefine the hotkeys, for example through some conf files.

Since Din can send OSC commands, i was wondering how possible it will be to 
control the mouse position via X, Y coordinates that could arrive via OSC?

best regards,
/a

Hi, Although we can record the audio output from DIN by connecting some 
recorder through jack, it would be useful if DIN had a built function to deal 
with this.
I believe it should be possible to use jack.record ( as jack is now available 
for all platforms )

using the linux version DIN 5.2.1

Hi,
I'm new to din. But I can't get 

What steps will reproduce the problem?
1. Install din 3.0 on Arch
2. Start din (whether jackd is already started or not)
3. din segfaults

It makes no difference whether I erase the ~/.din folder as stated in the FAQ 

What is the expected output? What do you see instead?
Din should start somehow. The console throws some lines and ends in segfault. 

What version of the product are you using? On what operating system?
- Din 3.0
- Arch Linux with kernel 3.3.2-1
- jack2 (jackdmp) 1.9.8


Please provide any additional information below.

Console output with jack verbose mode enabled:

[victor@garmon ~]$ din
<<< using data files in /home/victor/.din/ >>>
<<< loading globals, done >>>
<< loading audio prefs from: /home/victor/.din/jack_prefs, done. >>>
<<< connecting to JACK server >>>
Jack: JackClient::SetupDriverSync driver sem in normal mode
Jack: JackPosixSemaphore::Connect name = jack_sem.1000_default_din
Jack: JackPosixSemaphore::Connect sem_getvalue 0
Jack: Clock source : system clock via clock_gettime
Jack: JackLibClient::Open name = din refnum = 3
+++ connected to JACK server as: din +++
Jack: JackClient::PortRegister ref = 3 name = din:L type = 32 bit float mono 
audio port_index = 7
Jack: JackClient::PortRegister ref = 3 name = din:R type = 32 bit float mono 
audio port_index = 8
+++ opened input & output ports +++
Jack: JackClient::PortRegister ref = 3 name = din:midi type = 8 bit raw midi 
port_index = 9
+++ opened MIDI port +++
<<< loading font from: /home/victor/.din/jag.fnt, done. >>>
<<< initialising console, done >>>
<<< loading curve editor settings from: /home/victor/.din/delay.ed, done >>>
+++ FFT setup complete +++ 
<<< loaded 102 curves from: waveforms.lib >>>
<<< loading curve editor settings from: /home/victor/.din/compressor.ed, done 
>>>
<<< loading curve editor settings from: /home/victor/.din/octave-shift.ed, done 
>>>
<<< loaded 15 curves from: octave-shift-patterns.lib >>>
<<< loading curve editor settings from: /home/victor/.din/drone-modulation.ed, 
done >>>
<<< loading curve editor settings from: /home/victor/.din/waveform1.ed, done >>>
<<< loading curve editor settings from: /home/victor/.din/drone.ed, done >>>
<<< loading curve editor settings from: /home/victor/.din/gater.ed, done >>>
<<< loaded 45 curves from: gater-patterns.lib >>>
<<< loading curve editor settings from: /home/victor/.din/modulation.ed, done 
>>>
<<< loading curve editor settings from: /home/victor/.din/waveform2.ed, done >>>
<<< loading curve editor settings from: /home/victor/.din/attack.ed, done >>>
<<< loading curve editor settings from: /home/victor/.din/decay.ed, done >>>
<<< loaded 7 curves from: attack.lib >>>
<<< loaded 6 curves from: decay.lib >>>
<<< loading curve editor settings from: /home/victor/.din/velocity.ed, done >>>
<<< loaded 9 curves from: velocity.lib >>>
<<< loading curve editor settings from: /home/victor/.din/morse-code.ed, done 
>>>
+++ created an IRC session +++
*** creating Tcl interpreter ***
+++ added 45 din commands to the Tcl interpreter +++
+++ created Tcl interpreter +++
<<< loading curve editor settings from: /home/victor/.din/font.ed, done >>>
\033[1;30m<<< mouse parameters:  acceleration:  0/1    threshold:  0 >>> \033[0m
<<< loading Tcl init script: done. +++
<<< saved ranges in: /home/victor/.din/.ranges >>>
<<< saved drones in: /home/victor/.din/.drone >>>
!!! couldnt load custom tuning from: /home/victor/.din/blues.intervals; will 
use defaults. +++
<<< setting up ranges >>>
<< loading ranges from: /home/victor/.din/blues.ranges
!!! couldnt load range pos from /home/victor/.din/blues.ranges, will use 
defaults +++
<<< ranges setup complete. >>>
<<< loading font from: /home/victor/.din/jag.fnt, done. >>>
+++ opened GLX visual 0x2b for rendering +++
+++ viewport: 640 480 +++
Cannot read socket fd = 5 err = Interrupted system call
Jack: JackClient::Activate
Jack: JackClient::StartThread : period = 5804 computation = 100 constraint = 
5804
Jack: Create non RT thread
Jack: ThreadHandler: start
Jack: JackClient::kBufferSizeCallback buffer_size = 256
Jack: JackPosixThread::AcquireRealTimeImp priority = 84
Jack: JackClient::ClientNotify ref = 7235940 name = dbusapi notify = 1701344105
Jack: JackClient::Connect src = din:L dst = system:playback_1
Jack: JackClient::ClientNotify ref = 7235940 name =  notify = 0
Jack: JackClient::AddClient name = , ref = 7235940 
Segmentation fault

What steps will reproduce the problem?
1. everytime i press the letter q
2. no matter is the .deb or compiled from source 
3. no matter is ran as root or as user

What is the expected output? What do you see instead?

a drone note is expected but one gets silence instead.

What version of the product are you using? On what operating system?

latest from both source or .deb

 din-1.tar.gz
 0.0.20100305-0ubuntu0~rzr1

Please provide any additional information below.

running under puredyne on a lenovo w500:

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory 
Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express 
Graphics Port (rev 07)
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset 
MEI Controller (rev 07)
00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER 
Controller (rev 07)
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT 
SOL Redirection (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network 
Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI 
Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio 
Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 
1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 
2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 
4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 
5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI 
Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 
03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller 
(rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 
03)
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 
3650
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN 
[Shiloh] Network Connection
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 
04)
15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host 
Adapter (rev 21)
15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff)
15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host 
Adapter (rev 11)
15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)

15:45 < KdaG> now i noticed that when i hit tab to enter cmd mode the tone 
remains still in the background
15:45 < KdaG> if it happens that i have the pointer inside the keyboard
15:45 < KdaG> .. but it should allow me to move out and change the tones no?
15:46 <@jag> move out of cmd mode it will change
15:46 < KdaG> yes
15:46 < KdaG> but it gets on a hold
15:47 < KdaG> it keeps the one tone i had before typing tab
15:47 <@jag> file a enhancement as can look at it later not forget
15:47 < KdaG> k

What steps will reproduce the problem?
1. running din from command line
2. running ./din inside source 
3.

What is the expected output? What do you see instead?
din interface
i see this code

shree@shree-laptop:~/Downloads/din-1.5.6/src$ ./din
<<< using data files in /home/shree/.din/ >>>
<<< loading font from: /home/shree/.din/jag.fnt, done. >>>
<<< loading globals from: /home/shree/.din/globals, done >>>
bad scalelist file
Segmentation fault


What version of the product are you using? On what operating system?
1.5.6
Ubunti 10.04 LTS

Please provide any additional information below.

I installed it when i changed over to pure dyne ppa and never gotto run it then 
i saw the update for it and figured i wold try the latest, so i ran it once 
prior to updating and it looked very cool and now since updating i cannot get 
it to run at all

pp

What steps will reproduce the problem?
1.Use a Portuguese laptop keyboard and I can't use [] or {} 
2.
3.

What is the expected output? What do you see instead?

Instead, of [ if I press AltGr+8 I get 8


What version of the product are you using? On what operating system?

din 1.4.2

Ubuntu 10.04
Please provide any additional information below.

We need to get into a GNU/Linux distribution. Especially multimedia
distributions. We need to support as many distro formats as possible -
.deb, .rpm etc.

see if this can be embedded in the samples page:

<embed type="application/x-shockwave-flash" width="350"     height="24"     
allowfullscreen="true"  allowscriptaccess="always"  
src="http://www.archive.org/flow/flowplayer.commercial-3.0.5.swf"   
w3c="true"  
flashvars='config={"key":"#$b6eb72a0f2f1e29f3d4","playlist":[{"url":"http:/
/www.archive.org/download/radio_lora_97.5Mhz_FM/din_pirata.mp3","aut
oPlay":false}],"clip":{"autoPlay":true},"canvas":{"backgroundColor":"0x00000
0","backgroundGradient":"none"},"plugins":{"audio":{"url":"http://www.archi
ve.org/flow/flowplayer.audio-3.0.3-
dev.swf"},"controls":{"playlist":false,"fullscreen":false,"gloss":"high","backgr
o
undColor":"0x000000","backgroundGradient":"medium","sliderColor":"0x77
7777","progressColor":"0x777777","timeColor":"0xeeeeee","durationColor":
"0x01DAFF","buttonColor":"0x333333","buttonOverColor":"0x505050"}},"co
ntextMenu":[{"Listen+to+radio_lora_97.5Mhz_FM+at+archive.org":"functio
n()"},"-","Flowplayer 3.0.5"]}'> </embed>

What steps will reproduce the problem?
1. build din from svn under Ubuntu 10.10(enhanced with KX-studio packages and 
Ubuntu Studio stuff)
2. start it in a terminal

 What do you see instead?

zettberlin@ubuzet:~$ /usr/local/bin/din 
<<< using data files in /home/zettberlin/.din/ >>>
<<< loading font from: /home/zettberlin/.din/jag.fnt, done. >>>
<<< initialising console, done >>>
<<< loading globals, done >>>
<<< loading curve editor settings from: /home/zettberlin/.din/delay.ed, done >>>
<<< loading curve editor settings from: /home/zettberlin/.din/compressor.ed, 
done >>>
Speicherzugriffsfehler



What version of the product are you using?

svn 

 On what operating system?

Ubuntu 10.10

What steps will reproduce the problem?
1. Move any vertex to left of first vertex and din crashes.

What is the expected output? What do you see instead?

din should recover gracefully, not crash. No vertex should be allowed to go
left of first vertex.

Audio time is fine.

But wall clock time uses clock() and not accurate. Use clock_gettime (..).