jpyke3 / mbp-manjaro Goto Github PK

The bswpm-mate packages are really out of date, until their respective maintainers update the packages a image cannot be created for bspwm-mate

Thank you so much, live usb worked like a charm, plasma on this hidpi screen is glorious, etc. Anyway, after following all instructions in readme.md (as of the time of opening this issue), Manjaro KDE when told to boot (which for some reason requires selecting Windows in the Mac bootloader and Manjaro in the subsequent Windows boot manager-- my attempts to remove the windows startup disk entry have been unsuccessful despite wiping the windows partition, and manjaro will not show up on the main menu) brings up the "Welcome to Manjaro Linux!" line, then shows the standard systemd scrolling, but ends up in a failure loop trying to start either snap daemon, login service, keyboard backlight, or some conbination thereof, extending the expected time for as long as possible and then stopping the service so it can start again. Which leads to it failing to start, and stopping so it can start again, etc... i left it for 3.5 hours and nothing had changed...

Am I doing something wrong? Is this a special proble with the Air? If I delete some files in the manjaro partition will it fix it? Is my screwy bootloader setup the problem? I have not tried any other DE/edition

Thank you so much for this amazing repo!

I was just trying to follow the steps in the "Building for yourself" section of the readme for KDE, but it stops after synchronizing package databases and throws an error. Here's my terminal output:

buildiso -f -p kde -k linux56-mbp
 --> Profile: [kde]
==> Start building [kde]
==> Cleaning up ...
  -> Deleting chroot [rootfs] (x86_64) ...
  -> Deleting isoroot [iso] ...
 --> Loading Packages: [Packages-Root] ...
==> Prepare [Base installation] (rootfs)
 --> mirror: https://manjaro.moson.eu/stable/$repo/$arch
==> Creating install root at /var/lib/manjaro-tools/buildiso/kde/x86_64/rootfs
  -> Installing packages to /var/lib/manjaro-tools/buildiso/kde/x86_64/rootfs
:: Synchronizing package databases...
 core                                170.1 KiB  2.91 MiB/s 00:00 [###################################] 100%
 extra                                 2.0 MiB  2.87 MiB/s 00:01 [###################################] 100%
 community                             5.9 MiB  3.29 MiB/s 00:02 [###################################] 100%
 multilib                            195.2 KiB  3.34 MiB/s 00:00 [###################################] 100%
error: target not found: linux56-mbp
==> ERROR: Failed to install packages to new root
==> ERROR: Failed to install all packages

I tried compiling with xfce, i3 and gnome and they are working perfectly with the newly added touchbar + audio packages!

All of the above was done inside virtual box with a manjaro-xfce iso downloaded from the releases section. I also noticed that the KDE folder in drive doesn't have an iso image. Is there something that I am missing during the KDE iso build procedure?

Mac Model
Does not matter; because I wasn't able to build the ISO. However I have 16,1 Macbook Pro.

Describe the bug
Trying to build ISO on Manjaro 21.0.5
buildiso -f -p xfce -k linux57-mbp
Getting error:

==> Creating install root at /var/lib/manjaro-tools/buildiso/xfce/x86_64/desktopfs
  -> Installing packages to /var/lib/manjaro-tools/buildiso/xfce/x86_64/desktopfs
:: Synchronizing package databases...
 core                             165.3 KiB   118 KiB/s 00:01 [#################################] 100%
 extra                           1913.2 KiB  92.9 KiB/s 00:21 [#################################] 100%
 community                          6.5 MiB  98.1 KiB/s 01:08 [#################################] 100%
 multilib                         178.1 KiB   138 KiB/s 00:01 [#################################] 100%
 mbp                               12.1 KiB  3.94 MiB/s 00:00 [#################################] 100%
error: target not found: orage
==> ERROR: Failed to install packages to new root
==> ERROR: Failed to install all packages
==> ERROR: A failure occurred in make_image_desktop().
    Aborting...
 --> overlayfs umount: [/var/lib/manjaro-tools/buildiso/xfce/x86_64/desktopfs]

To Reproduce
Steps to reproduce the behavior:

1. Run buildiso -f -p xfce -k linux57-mbp
2. Wait
3. See error

Thank you for creating this! I’ve followed steps and got Manjaro installed. When I boot it, the login screen shows, but after I entered my password, the screen goes black. A while later, the fan ramps up and it shuts itself down. Would you please help me on that?

Device: MBP 2019 16-inch (MacBookPro16,1)

Hi there,

running into an issue where the display seems to be cutting out about 10 seconds into the installer. This happens at:

[ OK ] Started Load/Save RF Kill Switch Status Match

I know there was a similar issue on the arch-mpb gist, related to the amd graphics, so perhaps this is related.

The touch bar turns on about 3seconds after the display cuts out, so it seems like the installation process is still running, just no graphics.

I'm using the efi=noruntime boot flag.
Latest manjaro KDE mbp ISO burned to Flash drive using balenaetcher
2018 Macbook Pro 2.6 GHz 6-Core Intel Core i7
Radio Pro 560x

Describe the bug
Unable to build manjaro-mbp in docker.

To Reproduce

1. Run sh -c "$(curl -fsSL "https://raw.githubusercontent.com/JPyke3/mbp-manjaro/master/build-in-docker.sh")", get: curl: (22) The requested URL returned error: 404
2. Download repo manually, enter ./Scripts and run sudo ./build-in-docker.sh -k linux57 -p xfce, get:

Unable to find image 'jpyke3/mbp-manjaro-buildiso:latest' locally
latest: Pulling from jpyke3/mbp-manjaro-buildiso
216c2b07dc6c: Pull complete 
37fb7c178f6c: Pull complete 
b96a7fedecbb: Pull complete 
Digest: sha256:2f4b774b0f20f4feae1bb3064396be60c4771d8f2b82eaf0a198f7dc3bde0b8a
Status: Downloaded newer image for jpyke3/mbp-manjaro-buildiso:latest
/usr/lib/manjaro-tools/util.sh: line 262: /etc/lsb-release: No such file or directory
/usr/lib/manjaro-tools/util.sh: line 257: /etc/lsb-release: No such file or directory
/usr/lib/manjaro-tools/util.sh: line 267: /etc/lsb-release: No such file or directory
/usr/lib/manjaro-tools/util.sh: line 272: /etc/lsb-release: No such file or directory
==> ERROR: xfce is not a valid profile or build list!
==> ERROR: Profile [/usr/share/manjaro-tools/iso-profiles//xfce] sanity check failed!

3. If trying to build Gnome, run: buildiso -f -p gnome -k linux57-mbp, get:

warning: cannot resolve "zfs-utils=0.8.5", a dependency of "linux57-mbp-zfs"
:: The following package cannot be upgraded due to unresolvable dependencies:
      linux57-mbp-zfs

:: Do you want to skip the above package for this upgrade? [y/N] 
error: failed to prepare transaction (could not satisfy dependencies)
:: unable to satisfy dependency 'zfs-utils=0.8.5' required by linux57-mbp-zfs
==> ERROR: Failed to install packages to new root
==> ERROR: Failed to install all packages

Mac Model
Which year and model of MacBook are you experiencing the bug on?
2020 13" Intel MBP

Describe the bug
A clear and concise description of what the bug is.
I can't get passed the grub menu when booting into the USB. I get to the grub screen and can choose to boot from open source or proprietary drivers, can select time zone, etc., but when I finally choose to reboot, it will just boot back into MacOS.

To Reproduce
Steps to reproduce the behavior:

1. Flash .iso to USB using Etcher
2. Turn off secure boot
3. Restart computer and select the EFI drive to boot from
4. Select either boot with proprietary drivers or open source drivers
5. It will always boot back into MacOS, even if I try to set the time zone

MacBook Air (Retina, 13-inch, 2020)
Which year and model of MacBook are you experiencing the bug on?
2020
Cmake
So I was installing the marjaro Linux and I followed the instructions and I found #16 (comment)
but once I got to cmake .. it did not work.

To Reproduce
Steps to reproduce the behavior:

1. Do the commands above
2. do cmake ..
   4. See error

[ 3058.082776] applesmc: send_byte(0x10, 0x0304) fail: 0xff
[ 3058.082778] applesmc: #KEY: read arg fail

goes on forever then gets stuck when booting into manjaro in the EFI Boot

could not satisfy dependency: •
unable to satisfy dependency zfs-utils=0.8.5 required by linux57-mbp-zfs

First of all great work, after a successful install and following all the steps. When I select EFI to boot Manjaro, its still boots into macOs

Mac Model
MBP 16,1 (2019)

Describe the bug
Cannot install Manjaro due to Calamares Initialization Failure.

To Reproduce
Steps to reproduce the behavior:

1. Boot into USB after flashing with iso (I used the 5.7 pre-release version (KDE) under 'download a latest release' on the installation wiki).

2. Execute Step 7 on the installation wiki to sync time and install calamares-mbp.
   -- I had to use -Sy instead of -S when installing calamares-mbp in order to install it with pacman

3. Open the installer and see Calamares Initialization Failed Screen (could not load modules partition@partition)

If steps 2 and 3 are reversed (opening installer and selecting keyboard, then installing calamares-mbp) it fails during the install (after doing the partitioning) and relaunching the installer gives the same error screen.

Notes
I used bootcamp to make a windows partition, then shrunk it to open enough unallocated space for manjaro (128gb) before starting the installation process.
I used the refind boot manager as I could not see the flash drive on the one that pops up after holding the options key while booting.

Screenshots

Hello, i know this is dup of #22 but error still occured.

Sorry, i'm kind of new in manjaro and linux world so i can't understand is this problem can be fixed be somehow. Thanks.

==> Creating install root at /var/lib/manjaro-tools/buildiso/gnome/x86_64/rootfs
  -> Installing packages to /var/lib/manjaro-tools/buildiso/gnome/x86_64/rootfs
:: Synchronizing package databases...
 core                                    169,6 KiB   392 KiB/s 00:00 [######################################] 100%
 extra                                  1893,0 KiB  6,25 MiB/s 00:00 [######################################] 100%
 community                                 6,6 MiB  18,0 MiB/s 00:00 [######################################] 100%
 multilib                                174,6 KiB  2,44 MiB/s 00:00 [######################################] 100%
 mbp                                      12,1 KiB  16,6 KiB/s 00:01 [######################################] 100%
resolving dependencies...
warning: cannot resolve "zfs-utils=0.8.5", a dependency of "linux57-mbp-zfs"
:: The following package cannot be upgraded due to unresolvable dependencies:
      linux57-mbp-zfs

At this stage, there seems to be several Openbox packages that haven't been updated for a long time. At this stage Openbox cannot be compiled until the respective maintaners can update their packages.

When these packages get updates new imgages can then be compiled

I followed the instructions with several linked ISOs on my Macbook pro 15,2 (with gnome 5.6 and 5.7, kde 5.6, xfce 5.6) and while it seems to mostly work fine, it stops responding to the built-in keyboard and trackpad when I suspend, and usually crashes shortly after.

Hi and thanks for making this repo, i have followed all the steps, everything seems to be working fine except the WiFi, currently im using my android with USB tethering, i have osx catalina and my wifi firmware seems to be 4377, i have copy pasted the files correctly from the ftp server provided:
'brcmfmac4377-pcie.Apple Inc.-MacbookPro15,4.txt'
'brcmfmac4377-pcie.bin'
'brcmfmac4377-pcie.clm_blob'

then i tried the wifi fix from aur and loaded the service and restarted, i then using iwd with iwctl and used device list
and seems to be empty, so i guess my firmware from catalina might not be supported.

also will the new checkm8 exploit on T2 chip make our lifes any easier ? i know i can change laptop but i have a mbp 15,4 from 2019 with touchbar from my company (i have permission to flash linux).
once again thanks for the work, was easy and simple to install linux with the pre installed kernel

Hi ! I followed all of the instructions with no issue but after completing the installation after rebooting when I press Option while powering on, Manjaro isn't listed.
I installed Linux57 manjaro i3 on a MacBook Pro 16".

• Mac Model: MacBook Air 2019, 13"

• Issue: Manjaro Deepin doesn't log in.

• Steps I've followed:

1. Installed Manjaro Deepin iso
2. Created a Bootable drive
3. Booted into drive
4. Clicked Boot x86 64
5. Took a while
6. Login Screen appeared
7. Tried to log in using the password "manjaro"
8. flashes some other screen and again goes into Login screen.
9. Again if I try to enter the password it does the same.

Screenshots:

• Login Screen
  

• Screen which flashes