A lightweight but powerful module, that allows you to easily control a PiGlow from Node.js

JVSPiGlow allows you to control a PiGlow in multiple ways:

• Set the brightness of all LEDs
• Set the brightness of all LEDs that have a specific color (the PiGlow has six differently colored LED 'rings')
• Set the brightness of all LEDs within a specific arm (the PiGlow has three LED 'arms')
• Set the brightness of a specific LED
• Set the brightness of a specific collection of LEDs

JVSPiglow also includes two easy-to-use effects:

• Fade a specific LED or a collection of LEDs to a specific brightness
• Pulse a specific LED or a collection of LEDs

• Raspberry Pi (tested on a Pi 2 Model B only, but should work on all previous models)
• Pimoroni PiGlow

Note: these installation instructions assume that your Raspberry Pi is running an installation of Raspbian, with both Node.js and npm installed. Additionally, JVSPiGlow requires Python 2.x, which should come pre-installed with Raspbian.

First of all, make sure that the Raspberry Pi is up-to-date:

sudo apt-get update && sudo apt-get upgrade

Next, install the SMBus module for Python, as it's required for JVSPiGlow to work:

sudo apt-get install python-smbus

Finally, you'll need to enable the I2C interface:

1. Open the modules configuration file:

    sudo nano /etc/modules
   

2. Add the following line at the end of the file (if it's not already there):

    i2c-dev
   

3. Save the file by pressing Ctrl + X, followed by Y and Enter.

4. Open the Raspberry Pi Configuration Tool:

    sudo raspi-config
   

5. Select Advanced Options and choose I2C. Enable both the I2C interface and kernel module when prompted.

6. Reboot the Raspberry Pi.

1. Use cd to navigate to the Node.js project directory.

2. Install JVSPiGlow using npm:

    npm install jvspiglow --save
   

JVSPiGlow consists of four separate components:

• JVSPiGlow - the main object that is exported when the module is loaded using require()
• JVSPiGlow.LED - an object that represents a specific LED
• JVSPiGlow.LEDCollection - an object that represents a collection of LEDs
• JVSPiGlow.LEDEffect - an object that represents an effect that can be applied to a specific LED or a collection of LEDs

Documentation for each of the above mentioned components can be found here.

Code examples that show how to use JVSPiGlow can be found here.

The MIT License (MIT)

Copyright (c) 2015 Joris Vervuurt Software

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.