jonbirge / ecochef Goto Github PK

Include text explaining features?

Better to highlight settings at beginning as including help.

Would it make sense to have a version that operates on Apple Watch? Timer arrays could be done similarly to how Apple handles alarm arrays. The phone could control which model is being used to avoid having any interface for that.

Maintain backwards compatibility with models, just allow for conversion in GUI.

• Ambient control switches units
• Timer controls and displays switch units
• Fields all show units
• For now leave measured data in F

The time at which the timer was stopped appears to flicker in after an early timer stop. Hard to reproduce. May be related to not updating temp during timer after snoozing. May be related to #31 .

Maybe even have each oven timer support an integrated preheat timing mode?

Remove http links and replace with mailto link?

I think this only applies to iOS 14? All the notification code is in PreheatTimerControl.

Should send user to settings. Eventually might be better to just have model selector available from front page...

Either when desired below current or ambient.

Bundle ID, etc.

• Better color scheme and font
• Adaptive layout
• 6x6 arrangement

The settings window should only apply to global things and always be available. The protest settings should be specific to a preheat timer and only cover ambient and model.

If the temp units were changed, this causes a problem.

Use a lower parameter model where the time constant is held and the upper bound is changed. Or vice versa. Also, only bother to ask about recording data for times above a minute.

Would be settable with one hand (e.g. +5 +10 buttons) and would visually show how long left until target time is reached. After it's reached, the time could still be increased incrementally.

One for timer and one for array.

May be related to #30

Show time remaining with a simple visual, such as color or partial fill or both.