jojos38 / anycubic-kobra-dark-ui Goto Github PK
View Code? Open in Web Editor NEWA dark and improved UI for the Anycubic Kobra 3d printer
A dark and improved UI for the Anycubic Kobra 3d printer
May just want to leave a note somewhere that you have to unplug the power cable for 20 seconds so that the caps can discharge. Then plug back in and reboot in order to update to your GUI via the SC card in the screen. At first I did it without unplugging and it wouldn't take the update. Don't know if you already noted that but just a heads up. Doing a second printer hence why I noticed the issue. Thanks again for this sweet GUI!
When printing, all the buttons show up, including the settings button. If the Settings button is pressed there is a 212 at the top left corner of the LCD. All the buttons normally there are active but there is no display of them. English version 1.1
Be nice to get the hmi to try fixing ourselves if there's a lack of time involved.
Hi, I wanted to know if this firmware can be used on the Kobra 2.
Hey!
iam not able to install your UI.
I checked the Fw and UI version. its correct.
I prepared my SD Card (32 GB SanDisk)
Structure looks like this:
The Printer Starts up, display shows immediatly the blue screen with SD Card ..... END
and every file extension is 0 :/
I tried creeating the DWIN_SET Folder by myself and pasting the files in there but no help.
Excellent job! But there is a minor glitch in Change Filament. The screen name is z-offset (top-most title).
However, it would be nice to have an additional z-axis 50% button in that screen. Where is the actual UI code to implement that feature?
The SD card is well detected but the status of the installation is at 000 everywhere.
When hitting the control button a black screen with the number 209 appears in the upper left hand corner. None of the control features show up, but if you know where to push on the screen the buttons are there. This is on V1.1 English.
Hi,
i've a old DWIN display here and wanted to use it for the Kobra max (i think it's from an old viper). Sadly the screen is rotated.
Is it possible to rotate it and adopt the ui for the lcd DMG80480C043?
I was running a FW version that was later than the version you stated, but downgrading went smoothly, it was when I installed this that I was just greeted with a black screen and the anycubic chime, the printer seems to still connect to octoprint, it just really disagrees with this dark ui. I've tried compiling it myself, using your custom firmware, etc, etc, all to no avail. I can get the regular interface (although a little glitchy) back by restoring the stock available FW. It would be nice to at least give a heads up that this won't work for specific DGUS models, as my model is one from February 2022. Any help or insight would be great! Thanks. My discord is wearr#3596 if you want to message me there!
Seems some of us less fortunate ones have TJC screens, not DWIN screens so we cannot update the screen FW. :(
Dave
Hi,
I wanted to create my own design for my printer but unfortunately I can't run the file on Windows. How do I have to execute the index.js file so that I can convert my code?
hi, well done for your job!
is it possible to make a thumnail preview on the screen when the host prnt screen appears?
is it possible to have a terminal in your ui?
i ve find the ui of malbuffy (https://github.com/malebuffy/Kobra-Max-Cobra-Kai-UI-and-Firmware) and he have sme cool fuctions and a mix between yours and this one can be cool.
like i ve say in the malbuffy's github, i ve tried to make this changes myself but i don't undurstand how use dgus tool lolll.
is it possible for you to do somme changes or explain me how modify an existing dgus project?
Hello! Recently upgraded to the dark mode and love it. One thing I noticed is that my Z-offset value isn't saving. I set it and tested/calibrated etc. Shut off printer, or it crashed due to hot-end errors and the Z-offset value was reset to 0.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.