Currently, Apple is in the process of transitioning their (computers) physical architecture away from Intel (x86) hardware to custom Apple Silicon (ARM) hardware. Even before this broad platform redesign Apple had been designing and integrating other custom hardware into their machines. To cover all of their hardware would require incorporating a large amount of infromation into this guide. My goal is for this guide to remain as up-to-date, and brief, as possible. To reach this goal this guide will initially only reference Apple's latest hardware configurations. As this guide progresses in completion older platforms/hardware maybe added as well. To learn what configurations are currently covered by this guide see the supported hardware section.

To suggest improvements feel free to submit a pull request or open an issue.

1. Supported Hardware
2. Security Posture
3. Installing macOS
4. Setup macOS
5. Post-Setup

Hardware/Machines currently covered by this guide

• MacBook Pro (M1 Pro/M1 Max) 2021 and Newer
• MacBook Pro (M1) 2020 and Newer
• MacBook Air (M1) 2020 and Newer
• Mac Mini (M1) 2020 and Newer
• iMac (M1) 2020 and Newer

TODO

• Trust in procurement of device
• Firewall security for bundled (Apple) and third party (signed software)

TODO

• macOS Security Compliance Project: Github/NIST
• CIS (Center for Internet Security) macOS Security Framework: their TOS (Terms of Service) suggests lawyers might get involved for directly referencing/incoprorating their framework policies here. Pending review for recommendation

By default, Apple devices come with macOS already pre-installed. Depending on your security posture it may be acceptable to use your device as is with this default installation and then going through the initial configuration setup. If your security posture is higher it may require reinstallation to ensure a valid/verified image from Apple. This section will cover these different scenarios.

Apple includes a "Recovery Partition" which allows for several simple diagnostics tasks including reinstalling the operating system. This method requires an acitve internet connection as it will pull a new copy of macOS from Apple's servers directly.

While reinstalling the OS via the recovery partition will provide you with a new install of the OS it does not reinstall the "Recovery Partiion" itself. To have a completely clean platform to reinstall macOS on top of you will need to wipe the entire disk first, reinstall the recovery partion, and then finally macOS. To do this you will need to have the base OS image installer on a separate external medium to reinstall from. Apple provides documentation on how to do this. Effectively, you will be booting from that external device as if it was the "Recovery Partition" which will allow you to wipe the internal disk of the machine and then reinstall macOS and the "Recovery Partition" on to it.

It is always best practice to validate any software package, if possible, before you install it to ensure the validity of the software. Usually, this is done by hashing the bundle and comparing the result with the hash value provided by the software maintainer. Apple, however, chooses to use "Code Signing"¹ instead to achieve a similar, albeit more complicated, result. It maybe worth noting that "Code Signing" is actually required of all software distributed via the App Store, this includes Apple's own OS Installer which is distributed in this manner. While Apple seems to have not properly signed their OS Installer app we can use 2 other pieces of information to provide a certain level of trust about the Installer app:

1. Gatekeeper, by default, only allows software signed by valid developers to be run
2. We can verify the certificate chain used to sign the Installer app; see below

$ pkgutil --verbose --check-signature /Applications/Install\ macOS\ Monterey.app
Package "Install macOS Monterey":
   Status: signed by a certificate trusted by macOS
   Certificate Chain:
    1. Software Signing
       Expires: 2026-10-24 17:39:41 +0000
       SHA256 Fingerprint:
           D8 4D B9 6A F8 C2 E6 0A C4 C8 51 A2 1E C4 60 F6 F8 4E 02 35 BE B1
           7D 24 A7 87 12 B9 B0 21 ED 57
       ------------------------------------------------------------------------
    2. Apple Code Signing Certification Authority
       Expires: 2026-10-24 17:39:41 +0000
       SHA256 Fingerprint:
           5B DA B1 28 8F C1 68 92 FE F5 0C 65 8D B5 4F 1E 2E 19 CF 8F 71 CC
           55 F7 7D E2 B9 5E 05 1E 25 62
       ------------------------------------------------------------------------
    3. Apple Root CA
       Expires: 2035-02-09 21:40:36 +0000
       SHA256 Fingerprint:
           B0 B1 73 0E CB C7 FF 45 05 14 2C 49 F1 29 5E 6E DA 6B CA ED 7E 2C
           68 C5 BE 91 B5 A1 10 01 F0 24

While it would be better if Apple would properly sign this Installer app these 2 pieces of information provide atleast a cautionary level of trust. If not, well, you did choose to support this company 😢

TODO

• Setup Configuration
• Filevault

A normal firewall(L3/L4) is primarily used to control Ingress (Inbound)/Egress (Outbound) data flows into a network/device usually by looking at the port and protocol of the connection being attempted. An application firewall(L7) is concerned with "who" is trying to make a connection regardless, typically, of the port/protocol being used. As an example with a normal firewall I might want to block all inbound TCP connections on port 80 whereas with an application firewall I would perhaps instead block all inbound connections for Apache, or perhaps that might be more refined to block all inbound HTTP connections to Apache.

As it applies to macOS Apple includes an application firewall which by default is turned off. You should turn this firewall on by navigating to System Preferences -> Security & Privacy -> Firewall. Note this firewall looks at inbound connections only. Further secure configurations can be enabled by going to "Firewall Options", and enabling the following defaults:

• Automatically allow built-in software to receive incoming connections
  • i.e. iCloud, Find My Mac, etc.
• Automatically allow downloaded and signed software to receive incoming connections
  • i.e anything downloaded from the App Store or in general from a third party that is validly signed by Apple
• Enable stealth mode
  • Don't respond to ping requets

Apple offers a bit more detail about these options here. Apple also publishes a list of ports used by macOS here

Paid/Proprietary Software:

• Vallum
• Murus

While usually associated with users trying to prevent "Hacked/Cracked" software from "Phoning Home", this category of firewalls has seen even further popularity due to proprietary software attempting to send "Telemetry" data, data about the user or how they configure their software, back to the developer. This has prompted many users to take a more hands on approach to monitoring and disabling connections this type of software tries to make

Paid/Proprietary Software:

• Little Snitch: Personally used by and vouched for by myself(Repo Owner)
• Radio Silence

Free:

• LuLu/Open Source

TODO

• Spotlight Suggestions
• Remote Login (SSH)
• Remote Management
• AntiVirus/AntiMaleware
• User Accounts
• Passwords
• Locking Machine
• Guest Account
• OS/Security Updates
• Automatic Login

This repo draws heavy inspiration as well as information from macOS Security and Privacy Guide