johang / sd-card-images Goto Github PK

Orange Pi One Plus H6 no boot neither image Debian bookworm/Ubuntu jammy

Odroid C2 successfully boots with Debian bookworm image but Ubuntu jammy, lunar, and mantic images stops at Starting kernel.... Serial console show no progress. Tried SanDisk Ultra and Samsung EVO SDHC cards. The only difference is Uncompressing Kernel Image in U-Boot output with Ubuntu images.

Debian:

U-Boot 2023.04 (Jul 02 2023 - 23:21:30 +0000) odroid-c2

Model: Hardkernel ODROID-C2
SoC:   Amlogic Meson GXBB (S905) Revision 1f:b (0:1)
DRAM:  2 GiB
Core:  164 devices, 27 uclasses, devicetree: separate
MMC:   mmc@72000: 0, mmc@74000: 1
Loading Environment from nowhere... OK
In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet@c9410000
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found U-Boot script /boot/boot.scr
987 bytes read in 3 ms (321.3 KiB/s)
## Executing script at 08000000
32350144 bytes read in 1416 ms (21.8 MiB/s)
35021950 bytes read in 1579 ms (21.2 MiB/s)
Unknown command 'setexpr' - try 'help'
Unknown command 'setexpr' - try 'help'
28168 bytes read in 10 ms (2.7 MiB/s)
Moving Image from 0x8080000 to 0x8200000, end=a180000
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   
   Image Type:   AArch64 Linux RAMDisk Image (uncompressed)
   Data Size:    35021886 Bytes = 33.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 08008000
   Booting using the fdt blob at 0x8008000
Working FDT set to 8008000
   Loading Ramdisk to 78dd1000, end 7af3743e ... OK
   Loading Device Tree to 0000000078dc7000, end 0000000078dd0e07 ... OK
Working FDT set to 78dc7000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.1.0-9-arm64 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld ()
[    0.000000] Machine model: Hardkernel ODROID-C2
...

Ubuntu:

U-Boot 2023.04 (Jul 02 2023 - 23:21:30 +0000) odroid-c2

Model: Hardkernel ODROID-C2
SoC:   Amlogic Meson GXBB (S905) Revision 1f:b (0:1)
DRAM:  2 GiB
Core:  164 devices, 27 uclasses, devicetree: separate
MMC:   mmc@72000: 0, mmc@74000: 1
Loading Environment from nowhere... OK
In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet@c9410000
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found U-Boot script /boot/boot.scr
999 bytes read in 2 ms (487.3 KiB/s)
## Executing script at 08000000
16828248 bytes read in 719 ms (22.3 MiB/s)
66363829 bytes read in 2828 ms (22.4 MiB/s)
Unknown command 'setexpr' - try 'help'
Unknown command 'setexpr' - try 'help'
28368 bytes read in 7 ms (3.9 MiB/s)
   Uncompressing Kernel Image
Moving Image from 0x8080000 to 0x8200000, end=b680000
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   
   Image Type:   AArch64 Linux RAMDisk Image (uncompressed)
   Data Size:    66363765 Bytes = 63.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 08008000
   Booting using the fdt blob at 0x8008000
Working FDT set to 8008000
   Loading Ramdisk to 76ff0000, end 7af3a175 ... OK
   Loading Device Tree to 0000000076fe6000, end 0000000076fefecf ... OK
Working FDT set to 76fe6000

Starting kernel ...

Hi,
I have the original Nanopi M4 and can't get it to boot using your Ubuntu Jammy or Luna images...

Booting using - wget https://dl.sd-card-images.johang.se/boots/2023-09-01/boot-nanopi_m4.bin.gz
and - wget https://dl.sd-card-images.johang.se/debians/2023-09-11/ubuntu-lunar-arm64-ochei7.bin.gz

Shows this error:
U-Boot TPL 2023.07-rc6-dirty (Sep 01 2023 - 00:06:59)
sdram_init: LPDDR3 - 933MHz failed!
rk3399_dmc_init DRAM init failed -22
Missing DTB

Seems to suggest this boot image is for Nanopi RC6?

Thanks

Richard

Hi,

im looking working image for Jetson TK1

tegra124-jetson-tk1.dts

Regards
Paweł

I have a board marked "ROCK PI 4 PLUS v1.73" that I can't get to work. I tried the images for "ROCK Pi 4 model B" and "ROCK Pi 4 model C" (tried both Bullseye and Bookworm) and in all cases I get solid green + blue LED light and no HDMI output. It does boot with rockpi-4b-debian-buster-xfce4-arm64-20220801-0347-gpt.img from Radxa but I would really prefer to run pure Debian on it.

Output from lshw:
https://pastebin.com/fx5Y3i7f

Output from dmesg:
https://pastebin.com/E4uGmvTb

(Maybe this should be seen as a feature request but from what I have found out this board is a variant of ROCK Pi 4B, so I guess these images are supposed to work?)

Wanted to know if a ( thehelm email server) HELM box ( rk3399 EVB board -> rock 4 core ) can be added to devices that are supported by this community?

Thank you.

First of all thank you for your hard work,

I've booted into the A10-Olinuxino-lime image, and I'm unable to get apt to work, it says Temporary failure resolving. It appears I'm connected and have an IP on eth0 (Can see it in the ifconfig). Can't ping since ping isn't installed.

Can confirm same ethernet port connection setup works with official Olimex images.

What could it be?

Downloaded you boot images for the Orange Pi Zero 2 as well as the Debian Bookworm image.... The Orange Pi is not booting. I am assuming it should work with your images?

Hi I'm using current Bookworm for Orange Pi Zero (2023-01-01 / 2023-01-09) but the onboard XR819 WiFi chip is nowhere to be seen. I edited /etc/apt/sources.list to include non-free, ran update, upgrade and dist-upgrade (nothing new installed) and rebooted but I still get this:

root@debian:~# iwconfig
lo        no wireless extensions.

end0      no wireless extensions.

root@debian:~# 

Any idea if or how I can enable the XR819 WiFi in your build? Note the XR819 chip has a dubious reputation, however in my experience it works well with Armbian (used daily to stream internet radio URL)

boot-tinker_board_s.bin.gz
debian-bookworm-armhf-phu3up.bin.gz

Just nothing...
Maybe there's a need to make a proper U-Boot?

Firstly, thank you for these images, they are great and your instructions you provide for creating the SD Card is very short and sweet, but more importantly it works !

I created an image for the BananaPi M2+ (H3 processor) and the image boots fast and loads the ethernet network perfectly, but I cannot find the Wi-Fi interface at all and am having nothing but problems trying to get it up and running; are there instructions on how to load the kernel module to get this device recognised?

Thank you in advance, Rick

Hello,

My browser warned me about insecure links and refused to download the files. And I'd say it's not just another hurdle that "the browser people" have invented to bother us, it is actually insecure and is a bad practice. Especially as the "dl" site supports HTTPs just fine, as confirmed by copy-pasting the URLs and changing HTTP to HTTPS. So why not?

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.1.0-9-arm64 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.27-1 (2023-05-08)
[    0.000000] Machine model: FriendlyElec NanoPC-T4
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf77dc380-0xf77defff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] cma: Reserved 64 MiB at 0x00000000ebc00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 30 pages/cpu s83560 r8192 d31128 u122880
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: root=PARTUUID=092ec43d-02 rw rootwait
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.000000] Memory: 227924K/4061184K available (12992K kernel code, 2790K rwdata, 9252K rodata, 6400K init, 628K bss, 145272K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] ftrace: allocating 43693 entries in 171 pages
[    0.000000] ftrace: allocated 171 pages with 5 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @600000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000005a0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000005b0000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002499] Console: colour dummy device 80x25
[    0.003191] printk: console [tty0] enabled
[    0.003416] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.003456] pid_max: default: 32768 minimum: 301
[    0.003985] LSM: Security Framework initializing
[    0.004099] landlock: Up and running.
[    0.004116] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004317] AppArmor: AppArmor initialized
[    0.004345] TOMOYO Linux initialized
[    0.004388] LSM support for eBPF active
[    0.004678] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.004729] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.007115] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.008416] cblist_init_generic: Setting adjustable number of callback queues.
[    0.008451] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.008640] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.009016] rcu: Hierarchical SRCU implementation.
[    0.009037] rcu:     Max phase no-delay instances is 1000.
[    0.011267] Platform MSI: interrupt-controller@fee20000 domain created
[    0.011803] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.012084] fsl-mc MSI: interrupt-controller@fee20000 domain created
[    0.015038] EFI services will not be available.
[    0.016121] smp: Bringing up secondary CPUs ...
[    0.017168] Detected VIPT I-cache on CPU1
[    0.017286] cacheinfo: Unable to detect cache hierarchy for CPU 1
[    0.017305] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.017327] GICv3: CPU1: using allocated LPI pending table @0x00000000005c0000
[    0.017388] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.018503] Detected VIPT I-cache on CPU2
[    0.018610] cacheinfo: Unable to detect cache hierarchy for CPU 2
[    0.018626] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.018645] GICv3: CPU2: using allocated LPI pending table @0x00000000005d0000
[    0.018686] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.019711] Detected VIPT I-cache on CPU3
[    0.019814] cacheinfo: Unable to detect cache hierarchy for CPU 3
[    0.019831] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.019849] GICv3: CPU3: using allocated LPI pending table @0x00000000005e0000
[    0.019888] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.020994] CPU features: detected: Spectre-v2
[    0.021006] CPU features: detected: Spectre-v3a
[    0.021015] CPU features: detected: Spectre-BHB
[    0.021024] CPU features: detected: ARM erratum 1742098
[    0.021032] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.021037] Detected PIPT I-cache on CPU4
[    0.021146] cacheinfo: Unable to detect cache hierarchy for CPU 4
[    0.021163] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.021181] GICv3: CPU4: using allocated LPI pending table @0x00000000005f0000
[    0.021221] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.022304] Detected PIPT I-cache on CPU5
[    0.022396] cacheinfo: Unable to detect cache hierarchy for CPU 5
[    0.022410] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.022427] GICv3: CPU5: using allocated LPI pending table @0x0000000000680000
[    0.022459] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.022593] smp: Brought up 1 node, 6 CPUs
[    0.022959] SMP: Total of 6 processors activated.
[    0.022978] CPU features: detected: 32-bit EL0 Support
[    0.022994] CPU features: detected: 32-bit EL1 Support
[    0.023013] CPU features: detected: CRC32 instructions
[    0.023157] CPU: All CPU(s) started at EL2
[    0.023201] alternatives: applying system-wide alternatives
[    0.109210] node 0 deferred pages initialised in 84ms
[    0.110912] devtmpfs: initialized
[    0.128276] Registered cp15_barrier emulation handler
[    0.128315] Registered setend emulation handler
[    0.128573] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.128638] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.130081] pinctrl core: initialized pinctrl subsystem
[    0.132805] DMI not present or invalid.
[    0.133788] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.135903] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.136482] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.137060] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.137150] audit: initializing netlink subsys (disabled)
[    0.137409] audit: type=2000 audit(0.136:1): state=initialized audit_enabled=0 res=1
[    0.138879] thermal_sys: Registered thermal governor 'fair_share'
[    0.138888] thermal_sys: Registered thermal governor 'bang_bang'
[    0.138907] thermal_sys: Registered thermal governor 'step_wise'
[    0.138920] thermal_sys: Registered thermal governor 'user_space'
[    0.138932] thermal_sys: Registered thermal governor 'power_allocator'
[    0.139000] cpuidle: using governor ladder
[    0.139050] cpuidle: using governor menu
[    0.139183] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.139404] ASID allocator initialised with 65536 entries
[    0.139997] Serial: AMBA PL011 UART driver
[    0.165885] platform fe330000.mmc: Fixed dependency cycle(s) with /syscon@ff770000/phy@f780
[    0.171054] platform ff900000.vop: Fixed dependency cycle(s) with /hdmi@ff940000
[    0.171159] platform ff8f0000.vop: Fixed dependency cycle(s) with /hdmi@ff940000
[    0.179981] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000
[    0.180785] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000
[    0.181593] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000
[    0.182351] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000
[    0.182994] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000
[    0.189495] KASLR disabled due to lack of seed
[    0.196898] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.196922] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.196939] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.196972] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.196988] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.197002] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.197017] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.197030] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.240857] ACPI: Interpreter disabled.
[    0.241921] iommu: Default domain type: Translated
[    0.241941] iommu: DMA domain TLB invalidation policy: strict mode
[    0.242269] EDAC MC: Ver: 3.0.0
[    0.245300] NetLabel: Initializing
[    0.245322] NetLabel:  domain hash size = 128
[    0.245335] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.245409] NetLabel:  unlabeled traffic allowed by default
[    0.245606] vgaarb: loaded
[    0.245968] clocksource: Switched to clocksource arch_sys_counter
[    0.246629] VFS: Disk quotas dquot_6.6.0
[    0.246730] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.247660] AppArmor: AppArmor Filesystem Enabled
[    0.247738] pnp: PnP ACPI: disabled
[    0.260255] NET: Registered PF_INET protocol family
[    0.260574] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.265558] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.265705] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.265845] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.266465] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.267752] TCP: Hash tables configured (established 32768 bind 32768)
[    0.268113] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.268285] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.268451] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.268845] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.268903] NET: Registered PF_XDP protocol family
[    0.268925] PCI: CLS 0 bytes, default 64
[    0.269655] Trying to unpack rootfs image as initramfs...
[    0.283306] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.284372] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.285624] kvm [1]: IPA Size Limit: 40 bits
[    0.289022] kvm [1]: vgic-v2@fff20000
[    0.289074] kvm [1]: GIC system register CPU interface enabled
[    0.289410] kvm [1]: vgic interrupt IRQ18
[    0.290098] kvm [1]: Hyp mode initialized successfully
[    0.317329] Initialise system trusted keyrings
[    0.317562] Key type blacklist registered
[    0.317924] workingset: timestamp_bits=42 max_order=20 bucket_order=0
[    0.325551] zbud: loaded
[    0.326813] integrity: Platform Keyring initialized
[    0.326867] integrity: Machine keyring initialized
[    0.326886] Key type asymmetric registered
[    0.326900] Asymmetric key parser 'x509' registered
[    2.828824] Freeing initrd memory: 34200K
[    2.870880] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    2.871009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.871223] io scheduler mq-deadline registered
[    2.888829] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.908268] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.911142] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 33, base_baud = 1500000) is a 16550A
[    2.911338] serial serial0: tty port ttyS0 registered
[    2.912387] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 34, base_baud = 1500000) is a 16550A
[    3.023535] printk: console [ttyS2] enabled
[    3.025575] Serial: AMBA driver
[    3.025899] SuperH (H)SCI(F) driver initialized
[    3.027433] msm_serial: driver initialized
[    3.033480] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    3.035416] mousedev: PS/2 mouse device common for all mice
[    3.040727] ledtrig-cpu: registered to indicate activity on CPUs
[    3.042411] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    3.098003] NET: Registered PF_INET6 protocol family
[    3.135281] Segment Routing with IPv6
[    3.135699] In-situ OAM (IOAM) with IPv6
[    3.136146] mip6: Mobile IPv6
[    3.136436] NET: Registered PF_PACKET protocol family
[    3.137398] mpls_gso: MPLS GSO support
[    3.139220] registered taskstats version 1
[    3.139633] Loading compiled-in X.509 certificates
[    3.256166] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    3.257051] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[    3.261403] zswap: loaded using pool lzo/zbud
[    3.263308] Key type .fscrypt registered
[    3.263684] Key type fscrypt-provisioning registered
[    3.303541] Key type encrypted registered
[    3.303939] AppArmor: AppArmor sha1 policy hashing enabled
[    3.304473] ima: No TPM chip found, activating TPM-bypass!
[    3.304995] ima: Allocated hash algorithm: sha256
[    3.305480] ima: No architecture policies found
[    3.305940] evm: Initialising EVM extended attributes:
[    3.306463] evm: security.selinux
[    3.306766] evm: security.SMACK64 (disabled)
[    3.307152] evm: security.SMACK64EXEC (disabled)
[    3.307567] evm: security.SMACK64TRANSMUTE (disabled)
[    3.308020] evm: security.SMACK64MMAP (disabled)
[    3.308434] evm: security.apparmor
[    3.308743] evm: security.ima
[    3.309014] evm: security.capability
[    3.309338] evm: HMAC attrs: 0x1
[    3.889487] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[    3.900320] Freeing unused kernel memory: 6400K
[    3.959912] Checked W+X mappings: passed, no W+X pages found
[    3.960456] Run /init as init process
Loading, please wait...
Starting systemd-udevd version 252.6-1
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
[   14.047118] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[   14.047817] rockchip-pcie f8000000.pcie:      MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[   14.048597] rockchip-pcie f8000000.pcie:       IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[   14.050966] platform f8000000.pcie: deferred probe pending
[   14.051482] platform sdio-pwrseq: deferred probe pending
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for root file system device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  PARTUUID=092ec43d-02 does not exist.  Dropping to a shell!
(initramfs)

I've built a debian using debootstrap manually and, same error appears. Initramfs doesn't contain full mmc core support, and there is no mmc-core packages for arm64 in debian sources. So I gave up my work to use your project. But it seems that here is the same problem.

I believe something has changed with u-boot or something because both my Raspberry Pi 4 and my Asus Tinkerboard (RK3288) do not boot with debian testing. The build scripts are not working correctly, u-boot does not even boot on either board. I tested other distros and they work fine.

admittedly I don't know enough about what it takes to build a new image so apologize for the rookie questions

how would one go about adding support for a board that isn't listed in boards.csv? namely the orange pi 5

Hello,
i have "bookworm" running on my Orange Pi Zero Plus. Fine. :-)

But the Extension does not work. The USB Ports are not working. (Only 5V Power)
Expansion Board Link:
http://www.orangepi.org/html/hardWare/otherAccessories/details/Orange-Pi-Expansion-Board-For-Zero.html

I learned to add an "Overlay". Like this:
https://forum.armbian.com/topic/3718-orange-pi-zero-dev-kernel-does-not-see-expansion-usb-ports/

But how to do it in this Distribution?
/boot/config.txt?
Adding a *.dtb File?
Where to add?
How to make?

The "sun50i-h5-orangepi-zero-plus.dts" is available, but how to handle/install it?

Thanks.

Hi,

I tried your image for Banana Pi M2 Berry.
Unfortunately this does not work.
I think this is because the boot partition is empty.
The old images from banana-pi.org have the kernel and boot config on the boot partition.
Is there a way to boot from the root partition?

Hi, first thanks a lot for your work.

I've tried to use the debian bookworm image, with the bootloader, for the AML-S905X-CC (Le Potato) v1 but when I try to boot it gives me the following error:

SB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:0;READ:0;0.0;CHK:0;
no sdio debug board detected
TE: 1894605

BL2 Built : 16:20:27, Apr 19 2018. gxl g9478cf1 - jenkins@walle02-sh

set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 3
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 912MHz
bist_test rank: 0 1a 02 33 2a 16 3e 17 00 2f 2e 18 44 19 01 32 28 12 3f 17 00 2f 2a 13 41 712  rank: 1 16 00 2d 29 13 3f 13 00 27 2c 15 44 1a 05 2f 2a 14 41 19 04 2f 2b 14 43 712   - PASS

Rank0: 1024MB(auto)-2T-13

Rank1: 1024MB(auto)-2T-13
AddrBus test pass!
Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from SD, src: 0x00010200, des: 0x013c0000, size: 0x0000d600
Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002c600
Load bl33 from SD, src: 0x00050200, des: 0x01000000, size: 0x000b5e00
NOTICE:  BL3-1: v1.0(release):b60a036
NOTICE:  BL3-1: Built : 17:03:54, Apr 10 2018
[BL31]: GXL CPU setup!
NOTICE:  BL3-1: GXL normal boot!
mpu_config_enable:ok
[Image: gxl_v1.1.3308-45470c4 2018-04-12 16:22:58 jenkins@walle02-sh]
OPS=0x85
21 0e 85 00 e7 25 8e 3a 01 5f 4a 18 c6 c3 45 12
[3.688403 Inits done]
secure task start!
high task start!
low task start!
ERROR:   Error initializing runtime service opteed_fast

<debug_uart>


U-Boot 2023.07-rc6-g0beb6490 (Jul 08 2023 - 20:14:12 +0000) libretech-cc

Model: Libre Computer AML-S905X-CC
SoC:   Amlogic Meson GXL (S905X) Revision 21:e (85:2)
DRAM:  2 GiB
Core:  168 devices, 28 uclasses, devicetree: separate
MMC:   mmc@72000: 0, mmc@74000: 1
Loading Environment from nowhere... OK
In:    serial
Out:   serial
Err:   serial
[BL31]: tee size: 0
[BL31]: tee size: 0
Net:   eth0: ethernet@c9410000
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found U-Boot script /boot/boot.scr
893 bytes read in 2 ms (435.5 KiB/s)
## Executing script at 08000000
5329408 bytes read in 228 ms (22.3 MiB/s)
24628814 bytes read in 1043 ms (22.5 MiB/s)
Unknown command 'bootz' - try 'help'
SCRIPT FAILED: continuing...
No EFI system partition
No EFI system partition
Failed to persist EFI variables
BootOrder not defined
EFI boot manager: Cannot load any image
MMC Device 2 not found
no mmc device at slot 2
starting USB...
Bus usb@c9000000: dwc3_meson_gxl_get_phys: usb2 ports: 2
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus usb@c9000000 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
ethernet@c9410000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@c9410000

Would you happen to know know what is the issue here? If so, and some development is needed I would be more the glad to help with a PR, tough I might need some guidance.

Again, thanks for your amazing work.

None of the USB ports work.
putty.log

I have your Debian Bookworm version on a La Frite and I can upgrade packages except a few, most notably the kernel. I always get a message about no space left on device even though everything else can be installed.

Setting up libc6-dev:arm64 (2.36-9) ...
Processing triggers for libc-bin (2.36-9) ...
Processing triggers for initramfs-tools (0.142) ...
update-initramfs: Generating /boot/initrd.img-6.1.0-6-arm64
cpio: write error: No space left on device
E: mkinitramfs failure cpio 2
update-initramfs: failed for /boot/initrd.img-6.1.0-6-arm64 with 1.
dpkg: error processing package initramfs-tools (--configure):
 installed initramfs-tools package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
 linux-image-6.1.0-7-arm64
 linux-image-arm64
 initramfs-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)

flashed the image to the 32Gb emmc. Boot stuck on.
Loading init Ramdisk....
Verifying checksum ... OK
Flattened Device tree blob at 01f00000
Booting using the fdt blob at 0x1f00000

last line unreadable... outside screen range.

the emmc is a brand new one.

Thank you for your superb work on the images...

Hello bro, thank you very much for building the image, which has benefited me greatly.
This has rejuvenated my leezpi.
But this has also brought some minor issues, and I hope to receive your help.
The typec interface that was supposed to work in USB 3.0 mode can only run in USB 2.0 mode.
Looking forward to your.

I followed all instruction to make the SD card image and dd it into micro SD card, but here is what I got in continuous loop:

U-Boot 2020.07 (Aug 27 2020 - 00:42:52 +0000) Allwinner Technology

CPU:   Allwinner A13 (SUN5I)
Model: Olimex A13-Olinuxino Micro
I2C:   ready
DRAM:  256 MiB

U-Boot SPL 2020.07 (Aug 27 2020 - 00:42:52 +0000)
DRAM: 256 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1

My La Frite (512MB) is not able to correctly boot with the images on your website. The boot goes on to "Starting kernel" or maybe it is "Loading kernel" but nothing happens after that. Your earlier images that I used a couple of months ago did not have this issue.

I have tried several medias but the same thing happens.

Discussed in #57

I created sd-images for all three available Debian releases following the instructions (cat a b > c)
None of them boot.
The Libre board shows solid yellow and red LEDS (no heartbeat), no HDMI output and network is offline.

The sd-images look alright, FAT32 partition and linux partition, the linux filesystem shows no errors.
The FAT partition is not formatted.

The Libre board boots Raspbian and Armbian with success from the same microSD cards.

How can I help solve this?

Edit:
fdisk -l sd-image:

Device                  Boot Start     End Sectors  Size Id Type
boot-roc_rk3328_cc.bin1       8192   65535   57344   28M  c W95 FAT32 (LBA)
boot-roc_rk3328_cc.bin2 *    65536 7419903 7354368  3.5G 83 Linux

fdisk -l Armbian:

Device         Boot Start       End   Sectors   Size Id Type
/dev/mmcblk0p1      32768 247234560 247201793 117.9G 83 Linux

disk -l Raspbian

Device                                                     Boot  Start     End Sectors  Size Id Type
2022-09-22-raspbian-bullseye-arm64-lite+roc-rk3328-cc.img1        8192  532479  524288  256M  c W95 FAT32 (LBA)
2022-09-22-raspbian-bullseye-arm64-lite+roc-rk3328-cc.img2      532480 2875391 2342912  1.1G 83 Linux

Thanks for the images that you provide here - found it really useful!

I'm currently trying to enlarge the / partition, by default it's only ~1.8G for me while I'm using a 32 GB SD card in my banana pi. I tried multiple tutorials to enlarge the file system with fdisk - but it ends up always bricking the system, and it won't boot anymore. Example tutorial: https://erlerobotics.gitbooks.io/erle-robotics-erle-brain-a-linux-brain-for-drones/content/en/tutorials/expandingfilesystem.html

Also tried to install raspi-config which seems to do exactly what is written in the tutorial above, result is the same and the system won't boot anymore.

Please howto bullseye image for orange pi board because openmediavault not support newer distributions only buster and bullseye

The output on serial

SdmmcInit=2 1
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=29862MB
FwPartOffset=2000 , 0
StorageInit ok = 35739203
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3335db8 signature is wrong
recovery gpt...
GPT part:  0, name:          primary, start:0x8000, size:0x7f800
GPT part:  1, name:          primary, start:0x88000, size:0x1ff800
GPT part:  2, name:          primary, start:0x288000, size:0x1ff800
GPT part:  3, name:          primary, start:0x488000, size:0x35ca800
recovery gpt success!
no find partition:uboot.
Trust Addr:0x4000, 0x0
Trust Addr:0x4400, 0x0
Trust Addr:0x4800, 0x0
Trust Addr:0x4c00, 0x0
Trust Addr:0x5000, 0x0
Trust Addr:0x5400, 0x0
Trust Addr:0x5800, 0x0
Trust Addr:0x5c00, 0x0
Addr:0x4000 No find trust.img!
LoadTrustBL error:-3
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = -2, SecureMode = 0

Trying to use the Waveshare ETH/USB hat (the version that uses a dual micro USB connector NOT pogo pins) with the 10-10-22 img, but connected keyboards or wireless key/mouse dongles don't work - whereas a cheap USB hub connected with an OTG adapter works fine with devices.
Is it related to the RTL8152 USB Ethernet on this hub?

Hello, I have tried both Bookworm and Bullseye images for the ROC-RK3328-CC and I'm not able to get my display to work. The keyboard lights up and I see the Ethernet port blinking. The monitor is an Acer GN246HL hooked up w/ HDMI.

Boot image boot-a10s_olinuxino_micro.bin is damaged.

Steps to reproduce:

$ wget http://ftp.sd-card-images.johang.se/20210125_000001/boot-a10s_olinuxino_micro.bin.gz

$ gunzip boot-a10s_olinuxino_micro.bin.gz

$ fdisk -lu boot-a10s_olinuxino_micro.bin
Dysk boot-a10s_olinuxino_micro.bin: 32 MiB, bajtów: 33554432, sektorów: 65536
Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
Typ etykiety dysku: dos
Identyfikator dysku: 0x7e60c54d

Urządzenie Rozruch Początek Koniec Sektory Rozmiar Id Typ
boot-a10s_olinuxino_micro.bin1 2048 65535 63488 31M c W95 FAT32 (LBA)
boot-a10s_olinuxino_micro.bin2 * 65536 3903487 3837952 1,9G 83 Linux

$ sudo mount -o loop,offset=1048576 boot-a10s_olinuxino_micro.bin /mnt
mount: /mnt: can't read superblock on /dev/loop4.

The same issue when I write image to SD card:

$ cat /proc/partitions
major minor #blocks name
[....]
8 32 15558144 sdc
8 33 31744 sdc1
8 34 1918976 sdc2

$ sudo mount /dev/sdc1 /mnt
mount: /mnt: can't read superblock on /dev/sdc1.

$ sudo fsck.vfat /dev/sdc1
fsck.fat 4.1 (2017-01-24)
Logical sector size is zero.

First, thanks for making these images, I'm trying to use it to build an Octoprint server on an old PCDuino3 nano.

It boots perfectly and seems to run reasonably well, but it seems NTP does come up on start and sync the time. The lack of synced time creates issues with SSL certificate validations which impacts the ability to download packages including ntpdate.

I can manually set the date by copying it from another machine

# Time Synced machine
date +%s # copy time from a synced machine

# On the PCduino - set the time to something close
date -s "$(date -d @1670738614)"

After ntpdate is installed, I can manually sync time by using ntpdate tick.utoronto.ca , obviously it would be far better if the images automatically synced their time.

Hello,

the bookworm image is not bootable, the SID image works. Could you please check it. :-)

Maybe i found the problem, description following. On the other hand you can bring "bookworm" to run with a workaround. See information below.

I only testet "Orange Pi Zero Plus" from here:
https://sd-card-images.johang.se/boards/orange_pi_zero_plus.html

If you follow the Instructions (Download and zcat) the bookworm Image starts, the Ethernet LED are flashing, but no IP is assigned via DHCP. (SID Image in this way works). The bootprocess hangs! I have no serial Console. (The problem is not the image itself, but the creation of the SD Card)

I think the "problem" is the different image size between "Bookworm" and "SID" and maybe the "bookworm" Images does not fit into the created partition!?

To reproduce the error, you do not need an Orange PI Zero Plus, because the filesystem on SD Card looks damaged:

1. Download and zcat bookworm from instructions, write to SD Card. Keep SD Card in PC. Try to mount the Main partion in your PC. Filesystem access NOT possible. (gparted also find errors in Main SD Card Partition)

2. Download and zcat SID from instructions, write to SD Card. Keep SD Card in PC. Try to mount the Main partion in your PC. It works. You can access the filesystem.

Conclusion: The concatenation of "bookworm" image is faulty.

.

My personal workaround to make "bookworm" run is copy the Main Partition manually:

1.			# Extract files
-rw-rw-r--  1 user user   33554432 Jun 18 14:02 boot-orange_pi_zero_plus.bin
-rw-rw-r--  1 user user  256405633 Jun 18 14:02 debian-bookworm-arm64-oojoh7.bin.gz
-rw-rw-r--  1 user user 3800000000 Jun 18 20:18 sd-card.img

2.			# Copy ONLY Bootimage to SD Card
			# Then you have a valid Partition Table. Second Partition is visible now, but is empty. (Of course)

dd if=/boot-orange_pi_zero_plus.bin /dev/sdX

3.			# Format second (ca. 3.5GB) Partition with ext4 and Attribut "boot"
			# I used "gparted". Follow the instruction. Commandline will also work.

Something like: "mkfs.ext4 /dev/sdX2" # Not tested

4.			# Mount bookworm Image (downloaded) on loop Device

fdisk -lu sd-card.img		# bookworm image (Extracted from debian-bookworm-arm64-oojoh7.bin.gz)

Gerät                 Boot Anfang    Ende Sektoren Größe Kn Typ
sd-card.img1        8192   65535    57344   28M  c W95 FAT32 (LBA)
sd-card.img2 *     65536 7419903  7354368  3,5G 83 Linux

Calculate 65536*512 = 33554432

losetup -f		# Find first free loop device XX (Details see link below)

losetup -o 33554432 /dev/loopXX sd-card.img

fsck -fv /dev/loopXX	# If you like, you can file check. I never did it.

mkdir /mnt/bookworm-image

mount /dev/loopXX /mnt/bookworm-image	# Mount extracted bookworm Image File into Filesystem

5.			# Mount the second SD Card Partition. The empty created (and formatted) Partition.

mkdir /mnt/sd-card-partiton
mount /dev/sdX2 /mnt/sd-card-partiton

			# Now both (Downloaded Image and SD Card) Partitionen are mounted into Filesystem. You can copy.

6.			# Copy Data

cp -p -R /mnt/bookworm-image/. /mnt/sd-card-partiton


7. Umount and Eject. Use Card in Orange Pi Zero Plus. - It boots and works.

Add on, help from this sites:
https://askubuntu.com/questions/69363/mount-single-partition-from-image-of-entire-disk-device # Mount single partition from image of entire disk (device)
+
https://debianforum.de/forum/viewtopic.php?t=182516 # (gelöst) losetup und partitionierte Image-Datei

U-Boot 2022.01 (Apr 01 2022 - 03:47:48 +0000) Allwinner Technology

CPU: Allwinner V3s (SUN8I 1681)
Model: Lichee Pi Zero
DRAM: 64 MiB
WDT: Not starting watchdog@1c20ca0
MMC: mmc@1c0f000: 0
Loading Environment from FAT... Unable to use mmc 0:2... In: serial@1c28000
Out: serial@1c28000
Err: serial@1c28000
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found U-Boot script /boot/boot.scr
899 bytes read in 2 ms (438.5 KiB/s)

Executing script at 41900000

5001728 bytes read in 211 ms (22.6 MiB/s)
22567854 bytes read in 945 ms (22.8 MiB/s)
11445 bytes read in 54 ms (206.1 KiB/s)
Kernel image @ 0x41000000 [ 0x000000 - 0x4c5200 ]

Loading init Ramdisk from Legacy Image at 41c00000 ...

Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 22567790 Bytes = 21.5 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK

Flattened Device Tree blob at 41800000

Booting using the fdt blob at 0x41800000
Loading Ramdisk to 4187a000, end 42dffb6e ... OK
Loading Device Tree to 41874000, end 41879cb4 ... OK

Starting kernel ...

@johang Recently I got Lichee Pi Zero, trying to boot it up, but no success. Any hint of what and where I need to look to solve this issue?

U-Boot SPL 2020.10 (Oct 12 2020 - 23:08:36 +0000)
DRAM: 64 MiB
Trying to boot from MMC1

'''
U-Boot 2020.10 (Oct 12 2020 - 23:08:36 +0000) Allwinner Technology

CPU:   Allwinner V3s (SUN8I 1681)
Model: Lichee Pi Zero
DRAM:  64 MiB
MMC:   mmc@01c0f000: 0
Loading Environment from FAT... Unable to use mmc 0:2... In:    serial@01c28000
Out:   serial@01c28000
Err:   serial@01c28000                                                                                                        
Net:   No ethernet found.                                                                                                     
starting USB...                                                                                                               
No working controllers found                                                                                                  
Hit any key to stop autoboot:  0                                                                                              
switch to partitions #0, OK                                                                                                   
mmc0 is current device                                                                                                        
Scanning mmc 0:2...                                                                                                           
Found U-Boot script /boot/boot.scr                                                                                            
708 bytes read in 2 ms (345.7 KiB/s)                                                                                          
## Executing script at 41900000                                                                                               
4264448 bytes read in 194 ms (21 MiB/s)                                                                                       
efi_free_pool: illegal free 0x42d70040                                                                                        
efi_free_pool: illegal free 0x42d6c040                                                                                        
19744959 bytes read in 890 ms (21.2 MiB/s)                                                                                    
8479 bytes read in 10 ms (827.1 KiB/s)                                                                                        
## Loading init Ramdisk from Legacy Image at 41b00000 ...                                                                     
   Image Name:                                                                                                                
   Image Type:   ARM Linux RAMDisk Image (uncompressed)                                                                       
   Data Size:    19744895 Bytes = 18.8 MiB                                                                                    
   Load Address: 00000000                                                                                                     
   Entry Point:  00000000                                                                                                     
   Verifying Checksum ... Bad Data CRC                                                                                        
Ramdisk image is corrupt or invalid                                                                                           
SCRIPT FAILED: continuing...                                                                                                  
starting USB...                                                                                                               
No working controllers found                                                                                                  
USB is stopped. Please issue 'usb start' first.                                                                               
starting USB...                                                                                                               
No working controllers found                                                                                                  
No ethernet found.                                                                                                            
missing environment variable: pxeuuid                                                                                         
missing environment variable: bootfile                                                                                        
Retrieving file: pxelinux.cfg/00000000                                                                                        
No ethernet found.                                                                                                            
missing environment variable: bootfile                                                                                        
Retrieving file: pxelinux.cfg/0000000                                                                                         
No ethernet found.                                                                                                            
missing environment variable: bootfile                                                                                        
Retrieving file: pxelinux.cfg/000000                                                                                          
No ethernet found.                                                                                                            
missing environment variable: bootfile                                                                                        
Retrieving file: pxelinux.cfg/00000                                                                                           
No ethernet found.                                                                                                            
missing environment variable: bootfile                                                                                        
Retrieving file: pxelinux.cfg/0000                                                                                            
No ethernet found.                                                                                                            
missing environment variable: bootfile                                                                                        
Retrieving file: pxelinux.cfg/000                                                                                             
No ethernet found.                                                                                                            
missing environment variable: bootfile                                                                                        
Retrieving file: pxelinux.cfg/00                                                                                              
No ethernet found.                                                                                                            
missing environment variable: bootfile                                                                                        
Retrieving file: pxelinux.cfg/0                                                                                               
No ethernet found.                                                                                                            
missing environment variable: bootfile                                                                                        
Retrieving file: pxelinux.cfg/default-arm-sunxi-sunxi                                                                         
No ethernet found.                                                                                                            
missing environment variable: bootfile                                                                                        
Retrieving file: pxelinux.cfg/default-arm-sunxi                                                                               
No ethernet found.                                                                                                            
missing environment variable: bootfile                                                                                        
Retrieving file: pxelinux.cfg/default-arm                                                                                     
No ethernet found.                                                                                                            
missing environment variable: bootfile                                                                                        
Retrieving file: pxelinux.cfg/default                                                                                         
No ethernet found.                                                                                                            
Config file not found                                                                                                         
starting USB...                                                                                                               
No working controllers found                                                                                                  
No ethernet found.                                                                                                            
No ethernet found.                                                                                                            
=> 

When I run the command stated in the README file to build debian, I get the following error

chroot: failed to run command '/bin/sh': exec format error

Anyone who has an idea on how to fix/debug this?

#8 refers - data in resolv.conf is still wrong in Bookworm on Odroid N2+. (same as N2 just with faster processor)
I know the N2+ is on the network because ifconfig reports an IP address and I can ping that IP from another PC on the network.

I can diagnose the fault but I don't know how to fix this in the absence of a text editor.
PS I am really excited to find your images.... Now I just have to get the networking working...

Any help fixing this would be appreciated.

From what I understand, SSH host keys are generated automatically when openssh is installed.
However, this is quite bad, because users might not realize it and use private keys that are not actually private.
I recalled that OpenSSH generated new ones if it couldn't find them, but from a quick search it seems I'm wrong (but I haven't tried, either).
If it doesn't work, I suggest adding a script to do that on the first boot (I can try when I have more time), or at least mention it in the download page, with the other instruction.

That said, these images are great, thanks for this project!

Hello,

I'm trying to move the OS from the SD card to an USB-connected SSD. This is using the bookworm image.

Typically, what would be enough for this, is to delete all partitions from the SD card (leaving only u-boot there), and have those partitions on USB disk instead. Then u-boot is smart enough to not only check SD, but also USB storage for the partition to boot from.

However, on Orange Pi Win u-boot does not see any storage devices connected at all.

On Orange Pi Prime the boot-up from USB starts (the kernel is found and launched), but then appears to stop indefinitely on ~6th second of boot-up with only some regular messages on screen, about various USB devices being detected and initialized. No errors or timeouts (or I did not wait long enough).

What else might be required? Has anyone have any success with this? Thanks

I have installed to an sd card and a USB drive and neither will boot. Both boot to the rainbow screen and will not continue. Power supply is more than adequate, used different storage medias, tried both hdmi ports, etc. I cannot provide logs because no logs are being generated. I don't even know if it is loading anything from the media, I'm not too familiar with rpi boot process. Ethernet does not request IP address either, so I know that it's not the hdmi not working, it's not even booting the kernel. I had this problem like 6 months ago with these builds but I just thought my sd card was bad or something so I didn't try any further. Today I spent a considerable amount of time working on this and have concluded it is these images, not my storage media. Raspbian installs and boots just fine.

Support for IndieDroid Nova SBC?
https://ameridroid.com/products/indiedroid-nova

Hello Johan
I've tried your newest images on my Banana PI M5 board.
The EMMC is unformatted, I only use an 16 GB SD-Card.
As you can see at the end of the log, there is an error with
initializing the SD-Card, whatever that means.
Tried with Bookworm and Jammy, and different SD-Cards,
same error. Any idea ?

`bl2_stage_init 0x01
bl2_stage_init 0x81
hw id: 0x0000 - pwm id 0x01
bl2_stage_init 0xc1
bl2_stage_init 0x02

no sdio debug board detected
L0:00000000
L1:00000703
L2:00008067
L3:15000020
S1:00000000
B2:20282000
B1:a0f83180

TE: 368769

BL2 Built : 15:21:42, Mar 26 2020. g12a g486bc38 - gongwei.chen@droid11-sz

Board ID = 1
Set cpu clk to 24M
Set clk81 to 24M
Use GP1_pll as DSU clk.
DSU clk: 1200 Mhz
CPU clk: 1200 MHz
Set clk81 to 166.6M
board id: 1
Load FIP HDR DDR from SD, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
fw parse done
PIEI prepare done
fastboot data verify
result: 255
Cfg max: 12, cur: 1. Board id: 255. Force loop cfg
DDR4 probe

LPDDR4_PHY_V_0_1_21-Built : 15:37:51, Mar 26 2020. g12a gf098346 - gongwei.chen@droid11-sz
ddr clk to 1320MHz

dmc_version 0001
Check phy result
INFO : End of initialization
INFO : ERROR : Training has failed!
1D training failed
Cfg max: 12, cur: 2. Board id: 255. Force loop cfg
LPDDR4 probe
ddr clk to 1392MHz

dmc_version 0001
Check phy result
INFO : End of CA training
INFO : End of initialization
INFO : Training has run successfully!
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : End of Write leveling coarse delay
INFO : Training has run successfully!
Check phy result
INFO : End of initialization
INFO : End of read dq deskew training
INFO : End of MPR read delay center optimization
INFO : End of write delay center optimization
INFO : End of read delay center optimization
INFO : End of max read latency training
INFO : Training has run successfully!
1D training succeed
Check phy result
INFO : End of initialization
INFO : End of 2D read delay Voltage center optimization
INFO : End of 2D read delay Voltage center optimization
INFO : End of 2D write delay Voltage center optimization
INFO : End of 2D write delay Voltage center optimization
INFO : Training has run successfully!

soc_vref_reg_value 0x 00000015 00000018 00000016 00000015 00000016 00000016 00000016 00000016 00000015 00000015 00000014 00000014 00000014 00000014 00000016 00000014 00000016 00000013 00000016 00000015 00000016
dram_vref_reg_value 0x 00000061
2D training succeed
auto size-- 65535DDR cs0 size: 2048MB
DDR cs1 size: 2048MB
DMC_DDR_CTRL: 00e00024DDR size: 3928MB
cs0 DataBus test pass
cs1 DataBus test pass
cs0 AddrBus test pass
cs1 AddrBus test pass

non-sec scramble use zero key
ddr scramble enabled

100bdlr_step_size ps== 382
result report
boot times 0Enable ddr reg access
Load FIP HDR from SD, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
Load BL3X from SD, src: 0x00078200, des: 0x01768000, size: 0x000f4600, part: 0
0.0;M3 CHK:0;cm4_sp_mode 0
MVN_1=0x00000000
MVN_2=0x00000000
[Image: g12a_v1.1.3386-3b31431 2019-05-21 10:41:54 luan.yuan@droid15-sz]
OPS=0x10
ring efuse init
2b 0c 10 00 01 32 0e 00 00 13 32 31 36 58 4b 50
[0.017310 Inits done]
secure task start!
high task start!
low task start!
boot bl31
NOTICE: BL31: v1.3(release):4fc40b1
NOTICE: BL31: Built : 15:57:33, May 22 2019
NOTICE: BL31: G12A normal boot!
ERROR: Error initializing runtime service opteed_fast

<debug_uart>

U-Boot 2022.04 (Nov 01 2022 - 00:28:51 +0000)bpi-m5

Model: Banana Pi BPI-M5
SoC: Amlogic Meson SM1 (S905X3) Revision 2b:c (10:2)
DRAM: 3.8 GiB
Core: 377 devices, 24 uclasses, devicetree: separate
MMC: sd@ffe05000: 0, mmc@ffe07000: 1
Loading Environment from nowhere... OK
In: serial
Out: serial
Err: serial
Net: eth0: ethernet@ff3f0000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found U-Boot script /boot/boot.scr
1011 bytes read in 1 ms (987.3 KiB/s)

Executing script at 08000000

15062119 bytes read in 644 ms (22.3 MiB/s)
61195056 bytes read in 2609 ms (22.4 MiB/s)
Unknown command 'setexpr' - try 'help'
Unknown command 'setexpr' - try 'help'
49525 bytes read in 8 ms (5.9 MiB/s)
Uncompressing Kernel Image
Moving Image from 0x8080000 to 0x8200000, end=af90000

Loading init Ramdisk from Legacy Image at 13000000 ...

Image Name:
Image Type: AArch64 Linux RAMDisk Image (uncompressed)
Data Size: 61194992 Bytes = 58.4 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK

Flattened Device Tree blob at 08008000

Booting using the fdt blob at 0x8008000
Loading Ramdisk to 3c5a3000, end 3ffff2f0 ... OK
Loading Device Tree to 000000003c593000, end 000000003c5a2174 ... OK

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[ 0.000000] Linux version 5.15.0-52-generic (buildd@bos02-arm64-051) (gcc (Ubuntu 11.2.0-19ubuntu1) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #58-Ubuntu SMP Thu Oct 13 08:04:57 UTC 2022 (Ubuntu 5.15.0-5)
[ 0.000000] Machine model: Banana Pi BPI-M5
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'secmon@5000000': base 0x0000000005000000, size 3 MiB
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000e4000000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f4806fff]
[ 0.000000] NUMA: NODE_DATA [mem 0xf4017f80-0xf401cfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000f4806fff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000052fffff]
[ 0.000000] node 0: [mem 0x0000000005300000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x00000000f4806fff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000f4806fff]
[ 0.000000] On node 0, zone DMA: 14329 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 30 pages/cpu s83352 r8192 d31336 u122880
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: patching kernel code
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 985830
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: root=PARTUUID=8a11d710-02 rw rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] Memory: 3523220K/4005916K available (17344K kernel code, 4556K rwdata, 13824K rodata, 9536K init, 1191K bss, 220552K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 54018 entries in 212 pages
[ 0.000000] ftrace: allocated 212 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000343] Console: colour dummy device 80x25
[ 0.000689] printk: console [tty0] enabled
[ 0.000823] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000849] pid_max: default: 32768 minimum: 301
[ 0.001109] LSM: Security Framework initializing
[ 0.001166] landlock: Up and running.
[ 0.001178] Yama: becoming mindful.
[ 0.001298] AppArmor: AppArmor initialized
[ 0.001541] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001572] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.004028] rcu: Hierarchical SRCU implementation.
[ 0.008362] EFI services will not be available.
[ 0.009173] smp: Bringing up secondary CPUs ...
[ 0.010273] Detected VIPT I-cache on CPU1
[ 0.010355] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[ 0.011565] Detected VIPT I-cache on CPU2
[ 0.011634] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[ 0.012819] Detected VIPT I-cache on CPU3
[ 0.012878] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[ 0.012991] smp: Brought up 1 node, 4 CPUs
[ 0.013055] SMP: Total of 4 processors activated.
[ 0.013067] CPU features: detected: 32-bit EL0 Support
[ 0.013076] CPU features: detected: 32-bit EL1 Support
[ 0.013086] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.013099] CPU features: detected: Common not Private translations
[ 0.013109] CPU features: detected: CRC32 instructions
[ 0.013118] CPU features: detected: Data cache clean to Point of Persistence
[ 0.013129] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.013138] CPU features: detected: LSE atomic instructions
[ 0.013147] CPU features: detected: Privileged Access Never
[ 0.013156] CPU features: detected: RAS Extension Support
[ 0.038067] CPU: All CPU(s) started at EL2
[ 0.041045] devtmpfs: initialized
[ 0.054110] Registered cp15_barrier emulation handler
[ 0.054151] Registered setend emulation handler
[ 0.054168] KASLR disabled due to lack of seed
[ 0.054364] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.054407] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.059753] pinctrl core: initialized pinctrl subsystem
[ 0.060709] DMI not present or invalid.
[ 0.061435] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.067816] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.068185] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.068696] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.068771] audit: initializing netlink subsys (disabled)
[ 0.069025] audit: type=2000 audit(0.068:1): state=initialized audit_enabled=0 res=1
[ 0.070544] thermal_sys: Registered thermal governor 'fair_share'
[ 0.070554] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.070571] thermal_sys: Registered thermal governor 'step_wise'
[ 0.070582] thermal_sys: Registered thermal governor 'user_space'
[ 0.070593] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.070991] cpuidle: using governor ladder
[ 0.071032] cpuidle: using governor menu
[ 0.071173] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.071316] ASID allocator initialised with 65536 entries
[ 0.072919] Serial: AMBA PL011 UART driver
[ 0.093002] platform ff900000.vpu: Fixing up cyclic dependency with ff600000.hdmi-tx
[ 0.097736] platform cvbs-connector: Fixing up cyclic dependency with ff900000.vpu
[ 0.098765] platform hdmi-connector: Fixing up cyclic dependency with ff600000.hdmi-tx
[ 0.110742] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.110779] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.110793] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.110805] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.118748] fbcon: Taking over console
[ 0.118820] ACPI: Interpreter disabled.
[ 0.120209] iommu: Default domain type: Translated
[ 0.120233] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.121495] SCSI subsystem initialized
[ 0.121971] vgaarb: loaded
[ 0.122159] usbcore: registered new interface driver usbfs
[ 0.122224] usbcore: registered new interface driver hub
[ 0.122264] usbcore: registered new device driver usb
[ 0.122765] pps_core: LinuxPPS API ver. 1 registered
[ 0.122779] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 0.122804] PTP clock support registered
[ 0.123033] EDAC MC: Ver: 3.0.0
[ 0.125434] NetLabel: Initializing
[ 0.125461] NetLabel: domain hash size = 128
[ 0.125471] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.125538] NetLabel: unlabeled traffic allowed by default
[ 0.126330] clocksource: Switched to clocksource arch_sys_counter
[ 0.182101] VFS: Disk quotas dquot_6.6.0
[ 0.182210] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.182937] AppArmor: AppArmor Filesystem Enabled
[ 0.183018] pnp: PnP ACPI: disabled
[ 0.191696] NET: Registered PF_INET protocol family
[ 0.191942] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.193875] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.193988] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.194064] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.194388] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.194738] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.195011] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.195149] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.195231] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.195497] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.195536] NET: Registered PF_XDP protocol family
[ 0.195555] PCI: CLS 0 bytes, default 64
[ 0.195844] Trying to unpack rootfs image as initramfs...
[ 0.205452] kvm [1]: IPA Size Limit: 40 bits
[ 0.206804] kvm [1]: vgic interrupt IRQ9
[ 0.207024] kvm [1]: VHE mode initialized successfully
[ 0.208703] Initialise system trusted keyrings
[ 0.208785] Key type blacklist registered
[ 0.209128] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.215437] zbud: loaded
[ 0.217476] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.218471] fuse: init (API version 7.34)
[ 0.219136] integrity: Platform Keyring initialized
[ 0.255224] Key type asymmetric registered
[ 0.255263] Asymmetric key parser 'x509' registered
[ 0.255387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.255592] io scheduler mq-deadline registered
[ 0.261536] gpio-447 (usb-hub-reset): hogged as output/high
[ 0.268637] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.292488] soc soc0: Amlogic Meson SM1 (S905X3) Revision 2b:c (10:2) Detected
[ 0.296924] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.308221] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 24, base_baud = 1500000) is a meson_uart
[ 1.296857] printk: console [ttyAML0] enabled
[ 1.302557] msm_serial: driver initialized
[ 1.317589] loop: module loaded
[ 1.319234] SPI driver altr_a10sr has no spi_device_id for altr,a10sr
[ 1.324397] tun: Universal TUN/TAP device driver, 1.6
[ 1.328772] PPP generic driver version 2.4.2
[ 1.331634] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.337308] ehci-pci: EHCI PCI platform driver
[ 1.341763] ehci-orion: EHCI orion driver
[ 1.345992] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.351768] ohci-pci: OHCI PCI platform driver
[ 1.356235] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.362966] mousedev: PS/2 mouse device common for all mice
[ 1.369586] i2c_dev: i2c /dev entries driver
[ 1.375263] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 1.384473] device-mapper: uevent: version 1.0.3
[ 1.389264] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: [email protected]
[ 1.401260] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.404624] meson-sm: secure-monitor enabled
[ 1.411256] drop_monitor: Initializing network drop monitor service
[ 1.414430] NET: Registered PF_INET6 protocol family
[ 2.454704] Freeing initrd memory: 59760K
[ 2.486471] Segment Routing with IPv6
[ 2.486575] In-situ OAM (IOAM) with IPv6
[ 2.488474] NET: Registered PF_PACKET protocol family
[ 2.493631] Key type dns_resolver registered
[ 2.498381] registered taskstats version 1
[ 2.501913] Loading compiled-in X.509 certificates
[ 2.509296] Loaded X.509 cert 'Build time autogenerated kernel key: 85108c436d312788300ca8a945c6eea7bde7db0d'
[ 2.518725] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 2.528362] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 2.535854] blacklist: Loading compiled-in revocation X.509 certificates
[ 2.542574] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 2.552732] zswap: loaded using pool lzo/zbud
[ 2.557493] Key type ._fscrypt registered
[ 2.560537] Key type .fscrypt registered
[ 2.564398] Key type fscrypt-provisioning registered
[ 2.584793] Key type encrypted registered
[ 2.584853] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.588683] ima: No TPM chip found, activating TPM-bypass!
[ 2.594095] Loading compiled-in module X.509 certificates
[ 2.601893] Loaded X.509 cert 'Build time autogenerated kernel key: 85108c436d312788300ca8a945c6eea7bde7db0d'
[ 2.609255] ima: Allocated hash algorithm: sha1
[ 2.613760] ima: No architecture policies found
[ 2.618262] evm: Initialising EVM extended attributes:
[ 2.623305] evm: security.selinux
[ 2.626580] evm: security.SMACK64
[ 2.629849] evm: security.SMACK64EXEC
[ 2.633478] evm: security.SMACK64TRANSMUTE
[ 2.637533] evm: security.SMACK64MMAP
[ 2.641154] evm: security.apparmor
[ 2.644518] evm: security.ima
[ 2.647450] evm: security.capability
[ 2.650987] evm: HMAC attrs: 0x1
[ 2.684681] Freeing unused kernel memory: 9536K
[ 2.767767] Checked W+X mappings: passed, no W+X pages found
[ 2.767846] Run /init as init process
Loading, please wait...
Starting version 249.11-0ubuntu3
[ 3.636662] TFLASH_VDD: supplied by DC_IN
[ 3.637103] VDDAO_3V3: supplied by DC_IN
[ 3.638006] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 3.639654] VL_PWR_EN: supplied by DC_IN
[ 3.641072] EMMC_1V8: supplied by VDDAO_3V3
[ 3.658212] VDDAO_1V8: supplied by VDDAO_3V3
[ 3.683141] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[ 3.684144] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[ 3.690440] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[ 3.701044] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 3.703430] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
[ 3.708504] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[ 3.715928] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[ 3.723314] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[ 3.728506] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[ 3.735477] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[ 3.742000] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[ 3.747747] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[ 3.753500] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 3.792921] meson-vrtc ff8000a8.rtc: registered as rtc0
[ 3.793034] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:03 UTC (3)
[ 3.813711] meson-gx-mmc ffe05000.sd: Got CD GPIO
[ 3.817349] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[ 3.833954] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[ 3.834011] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[ 3.843150] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[ 3.846087] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[ 3.853383] dwc2 ff400000.usb: Controller does not support host mode.
[ 3.859324] dwc2: probe of ff400000.usb failed with error -22
[ 3.867252] dwc3-meson-g12a ffe09000.usb: switching to Device Mode
[ 3.883537] mmc0: error -84 whilst initialising SD card
[ 3.929392] mmc1: new HS200 MMC card at address 0001
[ 3.930807] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
[ 3.938240] mmcblk1boot0: mmc1:0001 AJTD4R 4.00 MiB
[ 3.940924] mmcblk1boot1: mmc1:0001 AJTD4R 4.00 MiB
[ 3.945567] mmcblk1rpmb: mmc1:0001 AJTD4R 4.00 MiB, chardev (237:0)
[ 4.061150] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.061228] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 4.068832] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[ 4.078035] xhci-hcd xhci-hcd.1.auto: irq 40, io mem 0xff500000
[ 4.083995] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.089267] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 4.096845] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 4.103478] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 4.111501] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.118669] usb usb1: Product: xHCI Host Controller
[ 4.123473] usb usb1: Manufacturer: Linux 5.15.0-52-generic xhci-hcd
[ 4.129768] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 4.135276] hub 1-0:1.0: USB hub found
[ 4.138382] hub 1-0:1.0: 2 ports detected
[ 4.142886] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.150483] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 4.158496] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.165649] usb usb2: Product: xHCI Host Controller
[ 4.170479] usb usb2: Manufacturer: Linux 5.15.0-52-generic xhci-hcd
[ 4.176773] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 4.182223] hub 2-0:1.0: USB hub found
[ 4.185364] hub 2-0:1.0: 1 port detected
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[ 4.730349] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 4.880981] usb 1-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.23
[ 4.883535] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.890600] usb 1-1: Product: USB2.0 Hub
[ 4.895605] usb 1-1: Manufacturer: VIA Labs, Inc.
[ 4.935978] hub 1-1:1.0: USB hub found
[ 4.936259] hub 1-1:1.0: 4 ports detected
[ 4.969977] mmc0: error -84 whilst initialising SD card
[ 5.030612] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 5.127251] usb 2-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.23
[ 5.129803] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.136921] usb 2-1: Product: USB3.0 Hub
[ 5.141915] usb 2-1: Manufacturer: VIA Labs, Inc.
[ 5.175755] hub 2-1:1.0: USB hub found
[ 5.175936] hub 2-1:1.0: 4 ports detected
[ 5.734348] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
[ 5.885810] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.01
[ 5.888526] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.895767] usb 1-1.1: Product: USB Receiver
[ 5.899991] usb 1-1.1: Manufacturer: Logitech
[ 6.048887] hid: raw HID events driver (C) Jiri Kosina
[ 6.061606] mmc0: error -84 whilst initialising SD card
[ 6.065208] usbcore: registered new interface driver usbhid
[ 6.066779] usbhid: USB HID core driver
[ 6.082363] input: Logitech USB Receiver as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52B.0001/input/input1
[ 6.150812] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.1.auto-1.1/input0
[ 6.158814] input: Logitech USB Receiver Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input2
[ 6.173596] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input3
[ 6.246695] input: Logitech USB Receiver System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input4
[ 6.257656] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.1.auto-1.1/input1
[ 6.270932] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.1.auto-1.1/input2
[ 6.444712] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.1.auto-1.1/input2
[ 6.573358] input: Logitech Wireless Device PID:401b Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:401B.0004/input/input6
[ 6.587206] hid-generic 0003:046D:401B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Wireless Device PID:401b] on usb-xhci-hcd.1.auto-1.1/input2:1
[ 6.603040] input: Logitech Wireless Device PID:4016 Keyboard as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input10
[ 6.617969] hid-generic 0003:046D:4016.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4016] on usb-xhci-hcd.1.auto-1.1/input2:2
[ 6.681787] input: Logitech M215 2nd Gen as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:401B.0004/input/input14
[ 6.693208] logitech-hidpp-device 0003:046D:401B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-xhci-hcd.1.auto-1.1/input2:1
[ 6.758100] input: Logitech K330 as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input15
[ 6.768748] logitech-hidpp-device 0003:046D:4016.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K330] on usb-xhci-hcd.1.auto-1.1/input2:2
[ 7.137555] mmc0: error -84 whilst initialising SD card
[ 8.225257] mmc0: error -84 whilst initialising SD card
[ 9.313200] mmc0: error -84 whilst initialising SD card
[ 10.401579] mmc0: error -84 whilst initialising SD card
[ 11.489259] mmc0: error -84 whilst initialising SD card
[ 12.577432] mmc0: error -84 whilst initialising SD card
[ 13.665229] mmc0: error -84 whilst initialising SD card
[ 14.753426] mmc0: error -84 whilst initialising SD card
[ 15.841220] mmc0: error -84 whilst initialising SD card
[ 16.929181] mmc0: error -84 whilst initialising SD card
[ 18.017463] mmc0: error -84 whilst initialising SD card
[ 19.105240] mmc0: error -84 whilst initialising SD card
[ 20.193417] mmc0: error -84 whilst initialising SD card
[ 21.281218] mmc0: error -84 whilst initialising SD card
[ 22.369452] mmc0: error -84 whilst initialising SD card
[ 23.457222] mmc0: error -84 whilst initialising SD card
[ 24.545211] mmc0: error -84 whilst initialising SD card
[ 25.633444] mmc0: error -84 whilst initialising SD card
[ 26.721232] mmc0: error -84 whilst initialising SD card
[ 27.809403] mmc0: error -84 whilst initialising SD card
[ 28.897229] mmc0: error -84 whilst initialising SD card
[ 29.985455] mmc0: error -84 whilst initialising SD card
[ 31.073223] mmc0: error -84 whilst initialising SD card
[ 32.161212] mmc0: error -84 whilst initialising SD card
[ 33.249464] mmc0: error -84 whilst initialising SD card
Begin: Waiting for root file system ... [ 34.337844] mmc0: error -84 whilst initialising SD card
Begin: Running /scripts/local-block ... done.
[ 35.424713] mmc0: error -84 whilst initialising SD card
done.
Gave up waiting for root file system device. Common problems:

• Boot args (cat /proc/cmdline)
  • Check rootdelay= (did the system wait long enough?)
• Missing modules (cat /proc/modules; ls /dev)
  ALERT! PARTUUID=8a11d710-02 does not exist. Dropping to a shell!

BusyBox v1.30.1 (Ubuntu 1:1.30.1-7ubuntu3) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) [ 36.513339] mmc0: error -84 whilst initialising SD card
[ 37.601459] mmc0: error -84 whilst initialising SD card
[ 38.689219] mmc0: error -84 whilst initialising SD card
[ 39.777213] mmc0: error -84 whilst initialising SD card
[ 40.865458] mmc0: error -84 whilst initialising SD card
[ 41.953249] mmc0: error -84 whilst initialising SD card
[ 43.041420] mmc0: error -84 whilst initialising SD card
[ 44.129228] mmc0: error -84 whilst initialising SD card
[ 45.217429] mmc0: error -84 whilst initialising SD card
[ 46.305205] mmc0: error -84 whilst initialising SD card
[ 47.393177] mmc0: error -84 whilst initialising SD card
[ 48.481460] mmc0: error -84 whilst initialising SD card
[ 49.569231] mmc0: error -84 whilst initialising SD card
[ 50.657397] mmc0: error -84 whilst initialising SD card
[ 51.745205] mmc0: error -84 whilst initialising SD card
[ 52.833423] mmc0: error -84 whilst initialising SD card
[ 53.921223] mmc0: error -84 whilst initialising SD card
[ 55.009186] mmc0: error -84 whilst initialising SD card
[ 56.097466] mmc0: error -84 whilst initialising SD card
[ 57.185252] mmc0: error -84 whilst initialising SD card
[ 58.273409] mmc0: error -84 whilst initialising SD card
[ 59.361222] mmc0: error -84 whilst initialising SD card
[ 60.449427] mmc0: error -84 whilst initialising SD card
[ 61.537201] mmc0: error -84 whilst initialising SD card
[ 62.625176] mmc0: error -84 whilst initialising SD card
[ 63.713469] mmc0: error -84 whilst initialising SD card
[ 64.801250] mmc0: error -84 whilst initialising SD card
[ 65.889429] mmc0: error -84 whilst initialising SD card
[ 66.977211] mmc0: error -84 whilst initialising SD card
[ 68.064906] mmc0: error -84 whilst initialising SD card
[ 69.153228] mmc0: error -84 whilst initialising SD card
[ 70.241180] mmc0: error -84 whilst initialising SD card
[ 71.329441] mmc0: error -84 whilst initialising SD card
[ 72.417243] mmc0: error -84 whilst initialising SD card
[ 73.505429] mmc0: error -84 whilst initialising SD card
[ 74.593226] mmc0: error -84 whilst initialising SD card
`

Hello.
Upon initiating a reboot via /usr/sbin/reboot or /usr/sbin/shutdown -r now the system halts, but does not reboot. A hard power cycle is required to get back up and running.

I've tested the Khadas VIM3 image as well as the ODROID N2 image, and both exhibit this behavior.

I tried reinstalling systemd-sysv just for good measure, but no success.

Any chance others are seeing this behavior?

Thanks for the great project!!

First off, thanks a lot for this impressive work.

I tried to build an image for Banana Pi BPI-M2-BERRY with Bullseye using:

sudo docker run --rm -v /tmp/sd-images:/artifacts sd-images build-boot \
    banana_pi_m2_berry allwinner-v40 bananapi_m2_berry_defconfig arm-linux-gnueabihf

sudo docker run --rm -v /tmp/sd-images:/artifacts sd-images build-debian \
    debian armhf bullseye

Two binary files were created, as expected, I concatenated them using:

zcat /tmp/sd-images/boot-banana_pi_m2_berry.bin.gz \
     /tmp/sd-images/debian-bullseye-armhf-XXXXXX.bin.gz > sd-card.img

After flashing sd-card.img to my SD card the device didn't boot. When inspecting the file systems of both .bin files I noticed that:

1. /boot partition in boot-...bin.gz is empty
2. /boot directory in debian-...bin.gz contains kernel and u-boot files
3. trying to move the files from debian-...bin.gz to boot-...bin.gz failed due to a lack of space in the 32M /boot partition

I then tried the same for a Raspberry Pi Zero 2 W and the final image turned out to be structurally ok (I didn't boot it though): two partitions (vfat and ext4), boot files in vfat boot partition and /boot mount point in ext4 rootfs empty.

Finally I ran another attempt for a Banana Pi BPI-M2-ZERO, but it failed for the same problem my initial attempt (Banana Pi BPI-M2-BERRY) failed, vfat /boot partition is empty.

I also checked your downloadable binaries for the two Banana Pis, same problem (mount them and check yourself).

how to install sd card image to nand or SATA to cubietruck?

I just installed an image on my banana pi m2m, but it has 0 usability. None of the commands work not even sudo and apt install sudo returns with error unable to locate package sudo.

I have an assortment of Raspberry Pis (RPis) and a couple of ODroids (C2, C4) on a network managed by an OpenWRT-based gateway running DNSMasq to provide DHCP/DNS services. In each case, I edit /etc/hostname with the desired <hostname> after flashing an image to the boot medium.

The RPis run a mix of images from RaspberryPi.com/software and raspi.debian.net/tested-images/. The DHCP-supplied Domain is picked up by these images, and hostname -f returns <hostname>.<domain>.

I'm trying out the ODroid C4 image from here. It seems to ignore the DHCP-supplied Domain: hostname -f on this device simply returns <hostname>.

Any pointers, please, on how to have the ODroid pick up the DHCP-supplied Domain in similar fashion to the other images?

Image: Debian Bookworm eip4oe
There are a few build steps detailed in the link below to get the Gigabit Ethernet port working.
https://forum.radxa.com/t/rock-pi-e-board-version-1-21-ethhernet-not-working-in-armbian/15061

dmesg output:

[   12.409968] mdio_bus stmmac-0: MDIO device at address 1 is missing.
...
...
[   12.431599] rk_gmac-dwmac ff550000.ethernet: supply phy not found, using dummy regulator
...
...
[   12.433442] rk_gmac-dwmac ff550000.ethernet: Can not read property: tx_delay.
[   12.434098] rk_gmac-dwmac ff550000.ethernet: set tx_delay to 0x30
[   12.434686] rk_gmac-dwmac ff550000.ethernet: Can not read property: rx_delay.
[   12.435336] rk_gmac-dwmac ff550000.ethernet: set rx_delay to 0x10
...
...
[   12.888965] rk_gmac-dwmac ff540000.ethernet end0: __stmmac_open: Cannot attach to PHY (error: -19)
...
...

[   13.302832] bluetooth hci0: firmware: failed to load rtl_bt/rtl8821c_fw.bin (-2)
[   13.303583] bluetooth hci0: firmware: failed to load rtl_bt/rtl8821c_fw.bin (-2)
[   13.304268] bluetooth hci0: Direct firmware load for rtl_bt/rtl8821c_fw.bin failed with error -2
[   13.305130] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8821c_fw.bin not found
...

Hello

I have installed the latest Bullseye image on a SD for my A64 Olimex w/ eMMC and I'm having trouble running the image from the eMMC.

I have copied back the original "olinuxino-sd-to-emmc" scripts onto the SD card and except that I had to regenerate a /etc/fstab file so it mentions UUIDs, the process works without errors.

Unfortunately when trying to boot from the eMMC, first nothing comes out on the HDMI port (but that may be unrelated), but most importantly, if I use the serial connection to the board (so I can see the boot messages), it seems to load some kind of limited kernel in a ramfs ... I don't know where this comes from really ... I don't even have to log in and only a limited set of linux commands is available ...

I suppose I should modify/regenerate stuff in /boot/boot.cmd (or .scr) but I'm not sure where to begin ...

Could you please help ? Thanks !

Here are the boot messages if it helps ...

`
U-Boot SPL 2021.04+olimex-1-20210821.121541 (Aug 21 2021 - 12:16:49 +0000)
DRAM: 1024 MiB
Trying to boot from MMC2
NOTICE: BL31: v2.0(debug):
NOTICE: BL31: Built : 23:33:29, Nov 27 2018
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x40b1870, model: Olimex A64-Olinuxino-eMMC
INFO: ARM GICv2 driver initialized
INFO: Configuring SPC Controller
NOTICE: BL31: PMIC: Detected AXP803 on RSB.
INFO: PMIC: AXP803: Enabling DRIVEVBUS
INFO: BL31: Platform setup done
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for 843419 was applied
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x4a000000
INFO: SPSR = 0x3c9

U-Boot 2021.04+olimex-1-20210821.121541 (Aug 21 2021 - 12:16:49 +0000) Allwinner Technology

CPU: Allwinner A64 (SUN50I)
Model: Olimex A64-Olinuxino-eMMC
DRAM: 1 GiB
MMC: mmc@1c0f000: 0, mmc@1c11000: 1
Loading Environment from EXT4... MMC: no card present
Warning: HDMI PHY init timeout!
Warning: HDMI PHY init timeout!
Warning: HDMI PHY init timeout!
Warning: HDMI PHY init timeout!
In: serial
Out: serial
Err: serial
Allwinner mUSB OTG (Peripheral)
Net: phy interface7
eth0: ethernet@1c30000, eth1: usb_ether
starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
Bus usb@1c1b000: USB EHCI 1.00
Bus usb@1c1b400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
scanning bus usb@1c1b000 for devices... EHCI timed out on TD - token=0x80008d80

  USB device not accepting new address (error=80000000)

3 USB Device(s) found
scanning bus usb@1c1b400 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:2...
Found U-Boot script /boot/boot.scr
993 bytes read in 2 ms (484.4 KiB/s)

Executing script at 4fc00000

27533184 bytes read in 1180 ms (22.3 MiB/s)
26251811 bytes read in 1126 ms (22.2 MiB/s)
28321 bytes read in 5 ms (5.4 MiB/s)
Moving Image from 0x40080000 to 0x40200000, end=41ce0000

Loading init Ramdisk from Legacy Image at 4fe00000 ...

Image Name:
Image Type: AArch64 Linux RAMDisk Image (uncompressed)
Data Size: 26251747 Bytes = 25 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK

Flattened Device Tree blob at 4fa00000

Booting using the fdt blob at 0x4fa00000
Loading Ramdisk to 486f6000, end 49fff1e3 ... OK
Loading Device Tree to 00000000486ec000, end 00000000486f5ea0 ... OK

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.10.0-9-arm64 ([email protected]) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.70-1 (2021-09-30)
[ 0.000000] Machine model: Olimex A64-Olinuxino
[ 0.000000] efi: UEFI not found.
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7fddab00-0x7fddcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] cma: Reserved 64 MiB at 0x000000007a000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 33 pages/cpu s95384 r8192 d31592 u135168
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: ARM erratum 843419
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: root=PARTUUID=51db4b8c-02 rw rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] Memory: 909188K/1048576K available (11840K kernel code, 2438K rwdata, 7020K rodata, 5440K init, 596K bss, 73852K reserved, 65536K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x560 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 38562 entries in 151 pages
[ 0.000000] ftrace: allocated 151 pages with 5 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1
[ 0.000000] arch_timer: CPU0: Trapping CNTVCT access
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000808] Console: colour dummy device 80x25
[ 0.001253] printk: console [tty0] enabled
[ 0.001393] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001423] pid_max: default: 32768 minimum: 301
[ 0.001604] LSM: Security Framework initializing
[ 0.001647] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.001798] AppArmor: AppArmor initialized
[ 0.001817] TOMOYO Linux initialized
[ 0.001913] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.001942] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.004428] rcu: Hierarchical SRCU implementation.
[ 0.006912] EFI services will not be available.
[ 0.007436] smp: Bringing up secondary CPUs ...
[ 0.009108] Detected VIPT I-cache on CPU1
[ 0.009169] arch_timer: CPU1: Trapping CNTVCT access
[ 0.009193] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.010451] Detected VIPT I-cache on CPU2
[ 0.010486] arch_timer: CPU2: Trapping CNTVCT access
[ 0.010500] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.011687] Detected VIPT I-cache on CPU3
[ 0.011718] arch_timer: CPU3: Trapping CNTVCT access
[ 0.011731] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.011835] smp: Brought up 1 node, 4 CPUs
[ 0.011934] SMP: Total of 4 processors activated.
[ 0.011949] CPU features: detected: 32-bit EL0 Support
[ 0.012008] CPU features: detected: CRC32 instructions
[ 0.012026] CPU features: detected: 32-bit EL1 Support
[ 0.024564] CPU: All CPU(s) started at EL2
[ 0.024638] alternatives: patching kernel code
[ 0.026687] devtmpfs: initialized
[ 0.034755] Registered cp15_barrier emulation handler
[ 0.034798] Registered setend emulation handler
[ 0.034819] KASLR disabled due to lack of seed
[ 0.035077] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.035135] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.037920] pinctrl core: initialized pinctrl subsystem
[ 0.038906] DMI not present or invalid.
[ 0.039580] NET: Registered protocol family 16
[ 0.041766] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.041938] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.042138] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.042218] audit: initializing netlink subsys (disabled)
[ 0.042426] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.043832] thermal_sys: Registered thermal governor 'fair_share'
[ 0.043838] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.043856] thermal_sys: Registered thermal governor 'step_wise'
[ 0.043871] thermal_sys: Registered thermal governor 'user_space'
[ 0.043885] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.044408] cpuidle: using governor ladder
[ 0.044455] cpuidle: using governor menu
[ 0.044589] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.044732] ASID allocator initialised with 65536 entries
[ 0.045269] Serial: AMBA PL011 UART driver
[ 0.072022] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.072060] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.072077] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.072093] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.893199] ACPI: Interpreter disabled.
[ 0.893545] iommu: Default domain type: Translated
[ 0.893855] vgaarb: loaded
[ 0.894294] EDAC MC: Ver: 3.0.0
[ 0.896060] NetLabel: Initializing
[ 0.896081] NetLabel: domain hash size = 128
[ 0.896093] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.896190] NetLabel: unlabeled traffic allowed by default
[ 0.896538] clocksource: Switched to clocksource arch_sys_counter
[ 0.982374] VFS: Disk quotas dquot_6.6.0
[ 0.982479] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.983375] AppArmor: AppArmor Filesystem Enabled
[ 0.983643] pnp: PnP ACPI: disabled
[ 0.993076] NET: Registered protocol family 2
[ 0.993262] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.994374] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.994446] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.994660] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.994822] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.995003] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.995058] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.995293] NET: Registered protocol family 1
[ 0.995334] NET: Registered protocol family 44
[ 0.995358] PCI: CLS 0 bytes, default 64
[ 0.995717] Trying to unpack rootfs image as initramfs...
[ 2.700872] Freeing initrd memory: 25636K
[ 2.701965] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 2.702413] kvm [1]: IPA Size Limit: 40 bits
[ 2.704244] kvm [1]: vgic interrupt IRQ9
[ 2.704439] kvm [1]: Hyp mode initialized successfully
[ 2.706323] Initialise system trusted keyrings
[ 2.706393] Key type blacklist registered
[ 2.706659] workingset: timestamp_bits=42 max_order=18 bucket_order=0
[ 2.714026] zbud: loaded
[ 2.714982] integrity: Platform Keyring initialized
[ 2.715009] Key type asymmetric registered
[ 2.715024] Asymmetric key parser 'x509' registered
[ 2.715077] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.715363] io scheduler mq-deadline registered
[ 2.716891] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device
[ 2.722751] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[ 2.724073] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.736096] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.738539] Serial: AMBA driver
[ 2.739018] msm_serial: driver initialized
[ 2.741637] mousedev: PS/2 mouse device common for all mice
[ 2.742962] sun6i-rtc 1f00000.rtc: registered as rtc0
[ 2.743011] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-02T15:46:14 UTC (143174)
[ 2.743031] sun6i-rtc 1f00000.rtc: RTC enabled
[ 2.744254] sun50i-a64-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
[ 2.744981] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.747262] NET: Registered protocol family 10
[ 2.792362] Segment Routing with IPv6
[ 2.792491] mip6: Mobile IPv6
[ 2.792511] NET: Registered protocol family 17
[ 2.792726] mpls_gso: MPLS GSO support
[ 2.793216] registered taskstats version 1
[ 2.793241] Loading compiled-in X.509 certificates
[ 2.980201] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 2.980303] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 2.980478] zswap: loaded using pool lzo/zbud
[ 2.981038] Key type ._fscrypt registered
[ 2.981056] Key type .fscrypt registered
[ 2.981069] Key type fscrypt-provisioning registered
[ 2.981284] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.001166] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
[ 3.006293] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 3.007113] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PB regulator
[ 3.007139] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 40
[ 3.007157] sun50i-a64-pinctrl 1c20800.pinctrl: pin-40 (1c28000.serial) status -517
[ 3.007178] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 40 (PB8) from group PB8 on device 1c20800.pinctrl
[ 3.007200] dw-apb-uart 1c28000.serial: Error applying setting, reverse things back
[ 3.007917] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PB regulator
[ 3.007942] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 40
[ 3.007960] sun50i-a64-pinctrl 1c20800.pinctrl: pin-40 (1c28000.serial) status -517
[ 3.007980] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 40 (PB8) from group PB8 on device 1c20800.pinctrl
[ 3.008002] dw-apb-uart 1c28000.serial: Error applying setting, reverse things back
[ 3.016996] Freeing unused kernel memory: 5440K
[ 3.047651] Checked W+X mappings: passed, no W+X pages found
[ 3.047717] Run /init as init process
[ 3.399482] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PF regulator
[ 3.399534] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 160
[ 3.399553] sun50i-a64-pinctrl 1c20800.pinctrl: pin-160 (1c0f000.mmc) status -517
[ 3.399575] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 160 (PF0) from group PF0 on device 1c20800.pinctrl
[ 3.399596] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[ 3.413072] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[ 3.413114] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[ 3.413133] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[ 3.413154] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0 on device 1c20800.pinctrl
[ 3.413176] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[ 3.502657] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
[ 3.502701] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 233
[ 3.502720] sun50i-a64-pinctrl 1c20800.pinctrl: pin-233 (1c20800.pinctrl:233) status -517
[ 3.502741] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[ 3.575456] usbcore: registered new interface driver usbfs
[ 3.575549] usbcore: registered new interface driver hub
[ 3.575633] usbcore: registered new device driver usb
[ 3.589379] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.602045] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.605596] ohci-platform: OHCI generic platform driver
[ 3.630977] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PB regulator
[ 3.631021] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 40
[ 3.631039] sun50i-a64-pinctrl 1c20800.pinctrl: pin-40 (1c28000.serial) status -517
[ 3.631060] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 40 (PB8) from group PB8 on device 1c20800.pinctrl
[ 3.631083] dw-apb-uart 1c28000.serial: Error applying setting, reverse things back
[ 3.633246] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PF regulator
[ 3.633307] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 160
[ 3.633325] sun50i-a64-pinctrl 1c20800.pinctrl: pin-160 (1c0f000.mmc) status -517
[ 3.633348] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 160 (PF0) from group PF0 on device 1c20800.pinctrl
[ 3.633371] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[ 3.633937] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
[ 3.633968] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 233
[ 3.633987] sun50i-a64-pinctrl 1c20800.pinctrl: pin-233 (1c20800.pinctrl:233) status -517
[ 3.634009] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[ 3.634215] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[ 3.634238] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[ 3.634257] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[ 3.634277] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0 on device 1c20800.pinctrl
[ 3.634299] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[ 3.636333] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PB regulator
[ 3.636372] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 40
[ 3.636391] sun50i-a64-pinctrl 1c20800.pinctrl: pin-40 (1c28000.serial) status -517
[ 3.636412] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 40 (PB8) from group PB8 on device 1c20800.pinctrl
[ 3.636434] dw-apb-uart 1c28000.serial: Error applying setting, reverse things back
[ 3.637478] ehci-platform: EHCI generic platform driver
[ 3.637942] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PF regulator
[ 3.637968] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 160
[ 3.637986] sun50i-a64-pinctrl 1c20800.pinctrl: pin-160 (1c0f000.mmc) status -517
[ 3.638007] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 160 (PF0) from group PF0 on device 1c20800.pinctrl
[ 3.638029] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[ 3.638805] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
[ 3.638839] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 233
[ 3.638857] sun50i-a64-pinctrl 1c20800.pinctrl: pin-233 (1c20800.pinctrl:233) status -517
[ 3.638879] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[ 3.640210] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[ 3.640244] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[ 3.640262] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[ 3.640284] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0 on device 1c20800.pinctrl
[ 3.640305] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[ 3.662952] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PB regulator
[ 3.662997] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 40
[ 3.663017] sun50i-a64-pinctrl 1c20800.pinctrl: pin-40 (1c28000.serial) status -517
[ 3.663039] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 40 (PB8) from group PB8 on device 1c20800.pinctrl
[ 3.663061] dw-apb-uart 1c28000.serial: Error applying setting, reverse things back
[ 3.666054] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PF regulator
[ 3.666097] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 160
[ 3.666116] sun50i-a64-pinctrl 1c20800.pinctrl: pin-160 (1c0f000.mmc) status -517
[ 3.666137] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 160 (PF0) from group PF0 on device 1c20800.pinctrl
[ 3.666159] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[ 3.668145] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
[ 3.668191] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 233
[ 3.668210] sun50i-a64-pinctrl 1c20800.pinctrl: pin-233 (1c20800.pinctrl:233) status -517
[ 3.668232] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[ 3.669895] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[ 3.669935] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[ 3.669953] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[ 3.669974] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0 on device 1c20800.pinctrl
[ 3.669996] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[ 3.671762] pps_core: LinuxPPS API ver. 1 registered
[ 3.671794] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 3.676425] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PB regulator
[ 3.676468] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 40
[ 3.676487] sun50i-a64-pinctrl 1c20800.pinctrl: pin-40 (1c28000.serial) status -517
[ 3.676508] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 40 (PB8) from group PB8 on device 1c20800.pinctrl
[ 3.676584] dw-apb-uart 1c28000.serial: Error applying setting, reverse things back
[ 3.682462] PTP clock support registered
[ 3.706781] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[ 3.706823] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 201
[ 3.706843] sun50i-a64-pinctrl 1c20800.pinctrl: pin-201 (1c20800.pinctrl:201) status -517
[ 3.711460] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found
[ 3.713605] libphy: Fixed MDIO Bus: probed
[ 3.723822] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[ 3.726138] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PF regulator
[ 3.726184] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 160
[ 3.726203] sun50i-a64-pinctrl 1c20800.pinctrl: pin-160 (1c0f000.mmc) status -517
[ 3.726224] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 160 (PF0) from group PF0 on device 1c20800.pinctrl
[ 3.726246] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[ 3.726606] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
[ 3.726636] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 233
[ 3.726654] sun50i-a64-pinctrl 1c20800.pinctrl: pin-233 (1c20800.pinctrl:233) status -517
[ 3.726676] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[ 3.729667] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[ 3.729711] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[ 3.729729] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[ 3.729752] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0 on device 1c20800.pinctrl
[ 3.729774] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[ 3.732644] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PB regulator
[ 3.732687] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 40
[ 3.732705] sun50i-a64-pinctrl 1c20800.pinctrl: pin-40 (1c28000.serial) status -517
[ 3.732726] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 40 (PB8) from group PB8 on device 1c20800.pinctrl
[ 3.732748] dw-apb-uart 1c28000.serial: Error applying setting, reverse things back
[ 3.735291] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[ 3.735336] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 201
[ 3.735355] sun50i-a64-pinctrl 1c20800.pinctrl: pin-201 (1c20800.pinctrl:201) status -517
[ 3.772804] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PD regulator
[ 3.772850] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 104
[ 3.772869] sun50i-a64-pinctrl 1c20800.pinctrl: pin-104 (1c30000.ethernet) status -517
[ 3.772892] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 104 (PD8) from group PD8 on device 1c20800.pinctrl
[ 3.772915] dwmac-sun8i 1c30000.ethernet: Error applying setting, reverse things back
[ 3.799225] axp20x-gpio axp20x-gpio: DMA mask not set
[ 3.799463] vcc-3v3: supplied by regulator-dummy
[ 3.799884] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded
[ 3.800196] vdd-cpux: supplied by regulator-dummy
[ 3.801193] dcdc4: supplied by regulator-dummy
[ 3.801483] vcc-ddr3: supplied by regulator-dummy
[ 3.802366] vdd-sys: supplied by regulator-dummy
[ 3.803234] dc1sw: supplied by regulator-dummy
[ 3.803270] sun4i-usb-phy 1c19400.phy: Couldn't get regulator usb0_vbus... Deferring probe
[ 3.803773] vcc-pe: supplied by regulator-dummy
[ 3.804287] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 3.804707] vcc-pl: supplied by regulator-dummy
[ 3.806548] vcc-pll-avcc: supplied by regulator-dummy
[ 3.807017] sun50i-a64-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[ 3.807059] sun50i-a64-pinctrl 1c20800.pinctrl: request() failed for pin 192
[ 3.807077] sun50i-a64-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[ 3.807099] sun50i-a64-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0 on device 1c20800.pinctrl
[ 3.807122] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[ 3.807844] vcc-hdmi: supplied by regulator-dummy
[ 3.808458] vcc-mipi: supplied by regulator-dummy
[ 3.809167] vcc-avdd-csi: supplied by regulator-dummy
[ 3.809839] vcc-wifi-io: supplied by regulator-dummy
[ 3.810440] cpvdd: supplied by regulator-dummy
[ 3.811028] vcc-dvdd-csi: supplied by regulator-dummy
[ 3.811512] eldo3: supplied by regulator-dummy
[ 3.811937] vcc-1v2-hsic: supplied by regulator-dummy
[ 3.812142] vdd-cpus: supplied by regulator-dummy
[ 3.812684] vcc-rtc: supplied by regulator-dummy
[ 3.813196] ldo-io0: supplied by regulator-dummy
[ 3.813632] ldo-io1: supplied by regulator-dummy
[ 3.813980] usb0-vbus: supplied by regulator-dummy
[ 3.828631] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 3.830398] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 36, base_baud = 1500000) is a U6_16550A
[ 5.975794] printk: console [ttyS0] enabled
[ 5.981268] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
[ 5.987721] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
[ 5.988211] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[ 5.999497] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 1806 (expect 0)
[ 6.008816] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[ 6.016117] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[ 6.023420] dwmac-sun8i 1c30000.ethernet: COE Type 2
[ 6.028457] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[ 6.028474] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[ 6.040943] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[ 6.042057] libphy: stmmac: probed
[ 6.076432] phy phy-1c19400.phy.0: Changing dr_mode to 1
[ 6.082003] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[ 6.088824] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 1
[ 6.096747] ohci-platform 1c1a400.usb: irq 29, io mem 0x01c1a400
[ 6.164769] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 6.173053] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.180289] usb usb1: Product: Generic Platform OHCI controller
[ 6.186219] usb usb1: Manufacturer: Linux 5.10.0-9-arm64 ohci_hcd
[ 6.192321] usb usb1: SerialNumber: 1c1a400.usb
[ 6.197614] hub 1-0:1.0: USB hub found
[ 6.201460] hub 1-0:1.0: 1 port detected
[ 6.207360] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[ 6.214103] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 2
[ 6.222057] ohci-platform 1c1b400.usb: irq 31, io mem 0x01c1b400
[ 6.288765] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 6.297050] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.304285] usb usb2: Product: Generic Platform OHCI controller
[ 6.310216] usb usb2: Manufacturer: Linux 5.10.0-9-arm64 ohci_hcd
[ 6.316319] usb usb2: SerialNumber: 1c1b400.usb
[ 6.321596] hub 2-0:1.0: USB hub found
[ 6.325431] hub 2-0:1.0: 1 port detected
[ 6.332614] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator
[ 6.334531] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[ 6.344945] musb-hdrc musb-hdrc.2.auto: MUSB HDRC host driver
[ 6.352483] musb-hdrc musb-hdrc.2.auto: new USB bus registered, assigned bus number 3
[ 6.360609] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 6.368898] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.372146] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 6.376136] usb usb3: Product: MUSB HDRC host driver
[ 6.390097] usb usb3: Manufacturer: Linux 5.10.0-9-arm64 musb-hcd
[ 6.396212] usb usb3: SerialNumber: musb-hdrc.2.auto
[ 6.401939] hub 3-0:1.0: USB hub found
[ 6.402978] mmc1: new high speed SDIO card at address 0001
[ 6.405815] hub 3-0:1.0: 1 port detected
[ 6.430605] ehci-platform 1c1a000.usb: EHCI Host Controller
[ 6.436276] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 4
[ 6.444219] ehci-platform 1c1a000.usb: irq 28, io mem 0x01c1a000
[ 6.464565] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[ 6.470960] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 6.479245] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.486479] usb usb4: Product: EHCI Host Controller
[ 6.491377] usb usb4: Manufacturer: Linux 5.10.0-9-arm64 ehci_hcd
[ 6.497484] usb usb4: SerialNumber: 1c1a000.usb
[ 6.502749] hub 4-0:1.0: USB hub found
[ 6.506594] hub 4-0:1.0: 1 port detected
[ 6.512474] ehci-platform 1c1b000.usb: EHCI Host Controller
[ 6.518162] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 5
[ 6.526212] ehci-platform 1c1b000.usb: irq 30, io mem 0x01c1b000
[ 6.652562] usb 2-1: new full-speed USB device number 2 using ohci-platform
[ 6.672563] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[ 6.678998] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 6.687283] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.694518] usb usb5: Product: EHCI Host Controller
[ 6.699411] usb usb5: Manufacturer: Linux 5.10.0-9-arm64 ehci_hcd
[ 6.705514] usb usb5: SerialNumber: 1c1b000.usb
[ 6.710794] hub 5-0:1.0: USB hub found
[ 6.714630] hub 5-0:1.0: 1 port detected
[ 6.972563] usb 5-1: new high-speed USB device number 2 using ehci-platform
[ 7.137188] usb 5-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 7.145410] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.152562] usb 5-1: Product: USB 2.0 Hub
[ 7.157521] hub 5-1:1.0: USB hub found
[ 7.161436] hub 5-1:1.0: 4 ports detected
[ 7.269280] random: fast init done
[ 7.576556] usb 5-1.1: new full-speed USB device number 3 using ehci-platform
[ 7.821044] usb 5-1.1: New USB device found, idVendor=0a12, idProduct=1004, bcdDevice=34.49
[ 7.829414] usb 5-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7.836736] usb 5-1.1: Product: Avantree DG80
[ 7.866583] hid: raw HID events driver (C) Jiri Kosina
[ 7.887265] usbcore: registered new interface driver usbhid
[ 7.892920] usbhid: USB HID core driver
[ 7.905572] input: Avantree DG80 Consumer Control as /devices/platform/soc/1c1b000.usb/usb5/5-1/5-1.1/5-1.1:1.3/0003:0A12:1004.0001/input/input0
[ 7.976790] input: Avantree DG80 as /devices/platform/soc/1c1b000.usb/usb5/5-1/5-1.1/5-1.1:1.3/0003:0A12:1004.0001/input/input1
[ 7.988855] hid-generic 0003:0A12:1004.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Avantree DG80] on usb-1c1b000.usb-1.1/input3
[ 8.040578] usb 5-1.3: new low-speed USB device number 4 using ehci-platform
[ 8.288064] usb 5-1.3: New USB device found, idVendor=045e, idProduct=0750, bcdDevice= 1.10
[ 8.296460] usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.303782] usb 5-1.3: Product: Wired Keyboard 600
[ 8.308585] usb 5-1.3: Manufacturer: Microsoft
[ 8.341567] input: Microsoft Wired Keyboard 600 as /devices/platform/soc/1c1b000.usb/usb5/5-1/5-1.3/5-1.3:1.0/0003:045E:0750.0002/input/input2
[ 8.413194] microsoft 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-1c1b000.usb-1.3/input0
[ 8.428112] input: Microsoft Wired Keyboard 600 as /devices/platform/soc/1c1b000.usb/usb5/5-1/5-1.3/5-1.3:1.1/0003:045E:0750.0003/input/input3
[ 8.500791] microsoft 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-1c1b000.usb-1.3/input1
`