This firmware is intended for use on the keychain hardware.
This repository contains the source code for fun project that blinks the LEDs on a keychain when the button is pressed
Keychain blinking LED project based on Microchip PIC16LF18326
* PIC16LF18326
* PCB
* Pushbutton
* 3.3v CR2032 Battery
* RED LED 0603
* 17x GREEN LED 0603
* 20x 1kΩ Resistor
* 1x 1000PF 0603
* 2x 0.1UF 0603
Used 1 PIC16LF18326 for controling the LEDs patterns. There are 1 Button allowing the circuit to be powered from the battery. When the button is pressed, the LEDs go on from the outside ring to the inside one.