Comments (11)
jneilliii
commented on June 6, 2024
Can you let me know how you configured that port in Tasmota? Once I can configure mine the same way I'll check into adding the functionality.
from octoprint-tasmota.
Lawrencezarb
commented on June 6, 2024
Its under user_config.h
// -- HTTP ----------------------------------------
#define USE_WEBSERVER // Enable web server and wifi manager (+62k code, +8k mem) - Disable by //
#define WEB_SERVER 2 // [WebServer] Web server (0 = Off, 1 = Start as User, 2 = Start as Admin)
#define WEB_PORT 3131 // Web server Port for User and Admin mode
From: jneilliii [mailto:[email protected]]
Sent: 06 December 2017 20:19
To: jneilliii/OctoPrint-Tasmota
Cc: Lawrencezarb; Author
Subject: Re: [jneilliii/OctoPrint-Tasmota] port (#9)
Can you let me know how you configured that port in Tasmota? Once I can configure mine the same way I'll check into adding the functionality.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub <#9 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/Ac4YYMZGFgtbS2Da1cinc95RngKhMxYHks5s9vaqgaJpZM4Q3qcI> . <https://github.com/notifications/beacon/Ac4YYLQlWhlFxoT-IBKOmmMerAt3xEskks5s9vaqgaJpZM4Q3qcI.gif>
from octoprint-tasmota.
jneilliii
commented on June 6, 2024
Thanks. Just to confirm, if you enter the ip in the plugin settings as 192.168.1.20:2020 it doesn't work? Based on the code, that should work unless I'm missing something. If you have tried that, please enable debug logging and try again and send a copy of your octoprint.log and plugin_tasmota_debug.log. I just tested with 192.168.1.20:80 (default port) and that is working for me.
from octoprint-tasmota.
Lawrencezarb
commented on June 6, 2024
That is exactly as I enter it, attached are the logs. Hope this helps.
From: jneilliii [mailto:[email protected]]
Sent: 06 December 2017 22:29
To: jneilliii/OctoPrint-Tasmota
Cc: Lawrencezarb; Author
Subject: Re: [jneilliii/OctoPrint-Tasmota] port (#9)
Thanks. Just to confirm, if you enter the ip in the plugin settings as 192.168.1.20:2020 it doesn't work? Based on the code, that should work unless I'm missing something. If you have tried that, please enable debug logging and try again and send a copy of your octoprint.log and plugin_tasmota_debug.log. I just tested with 192.168.1.20:80 (default port) and that is working for me.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub <#9 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/Ac4YYJAwnxDUSI_kPZpJ-9aCGc1Pj02Eks5s9xVGgaJpZM4Q3qcI> . <https://github.com/notifications/beacon/Ac4YYGFlc8oRdiUzeoMgH9XuzF3OkXNdks5s9xVGgaJpZM4Q3qcI.gif>
from octoprint-tasmota.
jneilliii
commented on June 6, 2024
I don't think github allow attachments from email replies, they didn't come through.
from octoprint-tasmota.
Lawrencezarb
commented on June 6, 2024
Try this, I have attached directly via github.
plugin_tasmota_debug.log
octoprint.log
from octoprint-tasmota.
jneilliii
commented on June 6, 2024
Ok, I see what's happening. The web sever is responding that you need to include a username and password to send the commands. Did you set those fields in the settings?
from octoprint-tasmota.
Lawrencezarb
commented on June 6, 2024
Yes I did. I edited the log to show xxxxx as the password not the one I set.
I even had the same problem when I removed to login/password
From: jneilliii [mailto:[email protected]]
Sent: 07 December 2017 22:16
To: jneilliii/OctoPrint-Tasmota
Cc: Lawrencezarb; Author
Subject: Re: [jneilliii/OctoPrint-Tasmota] port (#9)
Ok, I see what's happening. The web sever is responding that you need to include a username and password to send the commands. Did you set those fields in the settings?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub <#9 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/Ac4YYGKqU-CSLh8GeJN-gRSG9jOLo3Edks5s-GOugaJpZM4Q3qcI> . <https://github.com/notifications/beacon/Ac4YYB9JJ4Xgc1JpKLvnKgCFHjLxFGYgks5s-GOugaJpZM4Q3qcI.gif>
from octoprint-tasmota.
jneilliii
commented on June 6, 2024
Yeah, I assumed the xxxx was replacing those, but the username field appears blank. Set that to admin and it should in theory work, unless you also changed the admin username from the user_config.h file (assuming that's an option).
from octoprint-tasmota.
Lawrencezarb
commented on June 6, 2024
That’s got it working. I think because I saw admin already populated in the field I did not think to write over it.
Thanks for your time and effort.
From: jneilliii [mailto:[email protected]]
Sent: 07 December 2017 22:22
To: jneilliii/OctoPrint-Tasmota
Cc: Lawrencezarb; Author
Subject: Re: [jneilliii/OctoPrint-Tasmota] port (#9)
Yeah, I assumed the xxxx was replacing those, but the username field appears blank. Set that to admin and it should in theory work, unless you also changed the admin username from the user_config.h file (assuming that's an option).
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub <#9 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/Ac4YYKzGQzxfj0VE-7YnY3DHvEUnegUCks5s-GUCgaJpZM4Q3qcI> . <https://github.com/notifications/beacon/Ac4YYMBMgj2KRU1j7f3wj4Jz4Pyo4TEzks5s-GUCgaJpZM4Q3qcI.gif>
from octoprint-tasmota.
jneilliii
commented on June 6, 2024
No problem. It actually made me realize that I wasn't setting admin in the username field by default and it was just there as a placeholder in the html page. I adjusted that and now by default admin will be populated. BTW, if you're using MQTT; I'm in the process of creating an OctoPrint plugin to manage these over MQTT. Right now it's just a simple framework but is able to toggle the power on and off from a button in the navbar. Requires the MQTT plugin to be installed first. Any feedback welcome over on its repository.
from octoprint-tasmota.
Related Issues (20)
- API support for status HOT 6
- Power off during printing HOT 4
- issue when upgrading to octoprint 1.8.1 HOT 5
- Theme Support
- switch via API call HOT 4
- Lots of connection errors HOT 2
- Sonoff POW not switching off... HOT 6
- power off on idle not working ? HOT 3
- Request: "Keepalive" Interval HOT 6
- icon picker doesn't seem to work HOT 9
- S31 Sonoff plug (Tasmota Error... status unknown for the IP) HOT 5
- READINGS DO NOT MATCH plug with athom energy meter HOT 6
- Plugin requires SetOption65 to be 0 to work, but my plug keeps resetting if I do that. HOT 3
- using GCODE for shutdown in .gcode files fails HOT 4
- 'Power off on idle' does not wait for bed to cool HOT 3
- No connection with new device HOT 9
- Issue With Power Monitoring With Blank IDX HOT 1
- Power off on idle not working on MK4 HOT 4
- Use separate scale/graph for power/cost HOT 7
- 'power off after print finishes' checkbox. HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from octoprint-tasmota.