Step by step guide to hackintosh your dell latitude 5290 2 in 1 (Please Read the FULL guide before starting)

• CPU : Intel® Core™ i5-8350U Processor (6M Cache, up to 3.60 GHz)
• Graphics : Intel® UHD Graphics 620
• Memory : Samsung LPDDR3 16GB 1867MHZ (8GB * 2 Dual Channel)
• Display : 12.3 Inch 1920 X 1280 (WUXGA+) 3:2 10 Points Multi Touch
• Sound : Realtek ALC3253 (ALC225)
• Samsung NVMe SSD 512GB
• WiFi/Bluethooth : Intel BCM94352Z(DW1560) (WWAN Slot * 1)
• Battery : 42WHr

• BIOS : 1.17.0
• OpenCore Bootloader : v0.9 and Above
• macOS : Big Sur 11.7.10, Monterey 12.7, Ventura upto 13.3

• Load Optimized Defaults

Touch enabled OS PICKER ✅ WIFI/BT : ✅ GPU : ✅ Touchscreen : ✅ working as a magic mouse 2 with gestures Dell pen : ✅ working natively as a mouse Keyboard : ✅ Trackpad : ✅ Sound and mic : ✅ HDMI output : ✅ Usb type A : ✅ Usb type C : ✅❌ Camera : ❌ Card reader : ❌ ( i don't care about it to fix) 4g modem : ❌ ( this too ) SMBIOS : Macbook15.2

• YOU Must install Big sur first before upgrading to monterey/ventura
• Follow dortania guide to make bootable usbstick for BIG SUR 11.7 macos (not montery/not ventura) : https://dortania.github.io/OpenCore-Install-Guide/installer-guide/

• copy Efi folder (inside 1 - EFI BIG sur) to usb stick root.
• now your usb root should have 2 folders {com.apple.recovery.boot & EFI}

• download ProperTree and GenSMBIOS.

       -   https://github.com/corpnewt/ProperTree
       -   https://github.com/corpnewt/GenSMBIOS
  

• Next, let's open ProperTree and edit our config.plist:

  • ProperTree.command ** For macOS
  • ProperTree.bat ** For Windows

  Once ProperTree is running, open your config.plist by pressing Cmd/Ctrl + O and selecting the config.plist file on your USB.

• For setting up the SMBIOS info, we'll use GenSMBIOS application.

  

  Run GenSMBIOS, pick option 1 for downloading MacSerial and Option 3 for selecting out SMBIOS. This will give us an output similar to the following:

   #######################################################
   #               MacBookPro15,2 SMBIOS Info                  #
   #######################################################
  
   Type:         MacBookPro15,2
   Serial:       C02KCYZLDNCW
   Board Serial: C02309301QXF2FRJC
   SmUUID:       A154B586-874B-4E57-A1FF-9D6E503E4580
  
  
   The Type part gets copied to Generic -> SystemProductName.
  
   The Serial part gets copied to Generic -> SystemSerialNumber.
  
   The Board Serial part gets copied to Generic -> MLB.
  
   The SmUUID part gets copied to Generic -> SystemUUID.
  
   We set Generic -> ROM to either an Apple ROM (dumped from a real Mac), your NIC MAC address, or any random MAC address (could be just 6 random bytes, for this guide we'll use 11223300 0000. After install follow the Fixing iServices ( https://dortania.github.io/OpenCore-Post-Install/universal/iservices.html ) on how to find your real MAC Address)
  
   Reminder that you need an invalid serial! When inputting your serial number in Apple's Check Coverage Page , you should get a message such as "Unable to check coverage for this serial number."
  
   Automatic: YES
  
   Generates PlatformInfo based on Generic section instead of DataHub, NVRAM, and SMBIOS sections
   #Generic
  

 - boot usb stick and finish instalation.

 - follow this guide to Booting without USB and Fixing iServices
 
 https://dortania.github.io/OpenCore-Post-Install/#how-to-follow-this-guide

 - download Monterey or ventura dmg and do the update but before rebooting make sure to replace EFI folder with corresponded files , for Moneterey use monterey EFi and ventura use ventura EFI  (don't forget to replace SMBIOS Info in the new EFI files) .