jkirsons / doom-espidf Goto Github PK

On TTGO T4 GPIO26 used for DC signal of LCD. I make some changing in source code.
In i_sound.c i2s_set_dac_mode(I2S_DAC_CHANNEL_LEFT_EN); used GPIO26, i change it to
i2s_set_dac_mode(I2S_DAC_CHANNEL_RIGHT_EN);
but initialisation steel use both GPIO25 and GPIO26 for internal DAC, and im making some more changes
i2s_set_pin(I2S_NUM_0, NULL) //NULL is using both GPIOs
change to
i2s_set_pin(I2S_NUM_0, &pin_config);

and adding GPIO struct

static const i2s_pin_config_t pin_config = {
.data_out_num = 25
};

Now all work fine (but SPI work only on 26-30 mHz, for TTGO T4 need additional change in spi_lcd.c)

Hi,

sorry, not really an issue, just a little lack of information (and knowledge of course)...

Would you kindly tell me, please, how to upload the provided bin files?

I would use the ESP32 Flash Download tool but I don't know what I should upload (esp32-doom.bin and/or partitions.bin and/or bootloader.bin), and at which address...

thanks in advance

Giovi

In the file m_menu.c for some reason the strings have been removed from the OptionsMenu[] array. The array initialization needs to be restored to this in order for the menu to display its text properly:

menuitem_t OptionsMenu[]=
{
// killough 4/6/98: move setup to be a sub-menu of OPTIONs
{1,"M_GENERL", M_General, 'g'}, // killough 10/98
{1,"M_SETUP", M_Setup, 's'}, // phares 3/21/98
{1,"M_ENDGAM", M_EndGame,'e'},
{1,"M_MESSG", M_ChangeMessages,'m'},
/* {1,"M_DETAIL", M_ChangeDetail,'g'}, unused -- killough /
{2,"M_SCRNSZ", M_SizeDisplay,'s'},
{-1,"",0},
{1,"M_MSENS", M_ChangeSensitivity,'m'},
/ {-1,"",0}, replaced with submenu -- killough */
{1,"M_SVOL", M_Sound,'s'}
};

Would it be easy to use the SDL_mixer from Wolf4SDL in this port of Doom, so that there is music as well?