jhlucky / maqueen Goto Github PK

I have the following issue: no matter if I choose engine to run backward or forward it is only going backwards, even though it reads and display the right direction, could you pleaes help with that

I realy like the Maqueen! Is it possible to translate the blocks into other languages? I would certainly like to take care of the Dutch translation.

Hi,
I just tried this:

Makecode Program: https://makecode.microbit.org/_2Cc9gM5P5aDs

Right after, the "micro:Bit" shows its unhappy face with error code 050

I tried to rewrite your code example after re-loading the extension with this link: https://github.com/jhlucky/maqueen , it's visibly loading something, No error in "MakeCode" editor, the "maqueen" blocks category appears with a "m" logo instead of the original "Wi-Fi" logo.
After pushing the "untitled.hex" file to the "micro:Bit" board, nothing happens.

I added LED control to my program, to check if the program executes. It does switch On and Off the LEDs from the LEDs matrix of the "Micro:Bit", But, No motor control at all, while everything gets power from the batteries on the robot (USB cable disconnected)...

Any idea about what's (not) happening ??

For more details of my "story", keep reading... ;-)

I just acquired that little "MaQueen" / "McQueen" robot ( https://www.dfrobot.com/wiki/index.php/Micro:Maqueen_Robot_Car(V2.0)_SKU:_ROB0148 ; batch 2018-07-31 ) and a "Micro:Bit" (v1.5) to give a try before acquiring many more sets for a "STEM program" in a school.
(
By the way, I need to confirm the order by Monday morning, latest.
(I thought that such a very good looking quality product was not going to give me such a bad surprise...)
)

Well, first thing first, I wanted to try the "Motor Control": ( https://www.dfrobot.com/wiki/index.php/Micro:Maqueen_Robot_Car(V2.0)_SKU:_ROB0148#Motor_Control )

Makecode Programming Example
Motor Control
Learning Target: Mastering the basic method of motor control.
Effect: The car forward 1 second, right turn 1 second, left turn 1 second, back 1 second, back and right turn 1 second
(Makecode Program: https://makecode.microbit.org/_2Cc9gM5P5aDs ).

Thanks in advance ! ;-)

Best regards,
H.P.

P.S.
Here is my own "code" sample: https://makecode.microbit.org/_FqFP6tRF3e3y

Servo only works between 0 and 90 degrees. How do I have to make it work between 0 and 180 degrees

The lack of a proper readme file sparks my question : what is this repository relationship to the "official" one https://github.com/DFRobot/pxt-maqueen ?

Could you add block for barcodes reading as robot Edison?

https://meetedison.com/barcodes/

When importing the extension into the latest Makecode editor ( at https://makecode.microbit.org/#editor ), I am getting the error message:

Please add 'shims.d.ts' to "files" in pxt.json