Wiki correction, E22-900M30S about radiolib HOT 3 CLOSED

Thanks for pointing this out! Would you mind if I linked to your .txt file from the Wiki as the source for the 7.25 dB gain? The value I used was from a very suspicious, mostly Chinese datasheet.

Yes, of course. The measurements weren't done by me, but by a trusted discord user who was exploring the module, they gave me permission to put the data on my repo, I am sure linking is fine. I also measured the output power myself, and when setting the SX1262 output to 22 dBm there was ~30 dBm out the module, but this has a much larger uncertainity due to the use of three cheap attenuators and a tinySA instead of proper equipment.

from radiolib.

Thanks for pointing this out! Would you mind if I linked to your .txt file from the Wiki as the source for the 7.25 dB gain? The value I used was from a very suspicious, mostly Chinese datasheet.

You list the E220-900T30D but this doesn't support SPI, only a limited interface via UART, perhaps you meant the E220-900M30S?

Ah, yes, that is what I meant and will fix.

from radiolib.

@S5NC thank you - I updated the Wiki accordingly.

from radiolib.