Heltec Wireless Stick Lite V3 not receiving join accept about radiolib HOT 4 CLOSED

@HeadBoffin Here is the version as configured in TTN.

I unfortunately do no own a gateway, but there is a gateway fairly close up my street. Here is the RX metadata of the join.

{
  "rx_metadata": [
      {
        "gateway_ids": {
          "gateway_id": "lattech-systems",
          "eui": "3436323825004D00"
        },
        "time": "2024-03-06T17:11:34.529055Z",
        "timestamp": 1076214545,
        "rssi": -116,
        "channel_rssi": -116,
        "snr": -13,
        "location": {
          "latitude": -33.85896682739258,
          "longitude": 18.644634246826172,
          "altitude": 184,
          "source": "SOURCE_REGISTRY"
        },
        "channel_index": 2,
        "received_at": "2024-03-06T17:11:37.380981842Z"
      }
    ]
 }

from radiolib.

@HeadBoffin It must have been a signal issue. I change my location and the join was received successfully.

from radiolib.

Overall this is deeply unlikely to be an actual RadioLib issue, partly because this Heltec model is part of the test suite for LW and partly because the join request is being transmitted. And your keys must be OK as the LNS is issuing a join accept.

Can you confirm which version of LW you registered the device on TTN with.

Do you have a gateway? If so, where is it in relation to the device? What is the RSSI & SNR of join request?

from radiolib.

You are just on the edge of LoRa's abilities so you'll find your data rate is quite slow which will restrict airtime.

from radiolib.