RP2040-LoRa Development kit about radiolib HOT 6 CLOSED

Similar to #729, for this module you have to use hardware device SPI1 (instead of the default SPI0) and configure the pins for SPI1 accordingly.

from radiolib.

I would suggest to fill in the "module not working" template. In there, you will find a link to RadioLib Troubleshooting Guide, which I believe will help you greatly ;)

from radiolib.

That was the first thing I did, but to no success.

from radiolib.

That was the first thing I did, but to no success.

If you filled the template in, can you post it here, that's the first step in getting some meaningful assistance.

from radiolib.

Ah, that's where that nugget of information had disappeared to, thanks for finding it.

from radiolib.

Thank you, that was exactly right. In my particular case, like this:

Module* mod
MbedSPI SPI1(24, 15, 14);

void setup() {
      mod = new Module(LORA_CS, LORA_DIO1, LORA_RST, LORA_BUSY, SPI1);
}

In my specific case with this modul LINK, tcxoVoltage had to be set to zero.

from radiolib.