kouign-amann-pi's Introduction

kouign-amann-pi

Based on Raspbian Wheezy image 2014-01-07
New Raspberry install should follow:
- Install image on SD card
- First boot on ethernet
- To find out the Pi's IP address: nmap -sS -p 22 192.168.1.0/24 | grep Rasp -B 4
- ssh on it and do: sudo raspi-config to expand filesystem
- Reboot
- Install a ssh public key in authorized_key

Look at (https://github.com/pinterb/bootstrap/tree/master/provisioning/ansible/roles/vertx)

Install the base system

Based on raspbian image: 2014-01-07-wheezy-raspbian <=> MD5(6d8e5a48ff7c6bdc0bc0983bc32f75b8)
On first boot, ssh as pi user and do:
- sudo raspi-config
- 1 - Expand Filesystem
- Finish
- Reboot ? Yes

Set up the environment with Ansible

WARN: Ansible deploy is not up-to-date, do it manually (remove when updated)

In /etc/ansible, at the beginning of the file, add the following line :

[kouign-amann]

Then add all the IPs of the pis, just below the first line written before
Then run the command :

ansible-playbook ansible/init_pi.yaml

Set up the environment manually

Change password for user pi
Add every public key you need in .ssh/authorized_keys
Copy the script directory to the raspberry :

    scp -r scripts pi@rpi:

Connect and:

    sudo sh scripts/sysconf.sh

To get the wifi up and running:

    wpa_passphrase ssid mdp >> /etc/wpa_supplicant/wpa_supplicant.conf

/etc/network/interfaces

    auto lo

    iface lo inet loopback
    iface eth0 inet dhcp
    auto eth0
    allow-hotplug eth0

    auto wlan0
    allow-hotplug wlan0
    iface wlan0 inet manual
    wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
    iface default inet dhcp

Add to /etc/profile:

    export NUKE_SERVER=<SERVER_IP>

Add network interface listing to cron:

    crontab -e
    * * * * * sh /home/pi/scripts/send_ip.sh

Deploy

    gradle modzip
    scp conf.json pi@rpi:/home/pi/vertx_mods_conf/kouign-amann.conf
    scp build/libs/pi-1.0.zip pi@rpi:
    ssh pi@rpi "sudo sh scripts/apply_version.sh"

Recommend Projects