Linux support for the 3Dconnexion SpaceBall, SpaceNavigator and joysticks in the SecondLife clients

Currently supported are the following devices (VID:PID):

• 0x046d:0xc603 3Dconnexion SpaceMouse (untested)

• 0x046d:0xc605 CADMan (untested)

• 0x046d:0xc606 SpaceMouse Classic (untested)

• 0x046d:0xc621 SpaceBall 5000 (tested, works)

• 0x046d:0xc623 SpaceTraveller (untested)

• 0x046d:0xc625 SpacePilot (untested)

• 0x046d:0xc626 SpaceNavigator (tested, works)

• 0x046d:0xc627 SpaceExplorer (untested - from Armin Weatherwax <Armin.Weatherwax (at) gmail.com>)

• 0x046d:0xc628 SpaceNavigator for Notebooks (untested)

• 0x046d:0xc629 SpacePilot Pro (untested)

• 0x046d:0xc62b SpaceMouse Pro (untested - from David Seikel < http://onefang.net/ >

• 0x256f:0xc62e SpaceMouse Wireless (cable) (untested)

• 0x256f:0xc62f SpaceMouse Wireless (receiver) (untested)

• 0x256f:0xc631 SpaceMouse Wireless (untested)

• 0x256f:0xc632 SpaceMouse Pro Wireless (untested)

• 0x256f:0xc633 SpaceMouse Enterprise (tested, works)

• 0x256f:0xc635 SpaceMouse Compact (untested - from Kai Werthwein < https://github.com/KaiWerthwein >

The following devices were contributed by Ricky Curtice (http://rwcproductions.com/): (https://bitbucket.org/lindenlab/3p-libndofdev-linux/pull-request/1/open-277-linux-support-for-spacemousepro/diff)

CADMan, SpaceM (classic & wireless) except SpaceMouse Pro (non-wireless) and SpaceMouse Entreprise, SpaceNavigator for Notebooks

The devices marked as "untested" are expected to work and their VID:PIDs were sent to me by external contributors. I haven't tested them personally because I don't have that hardware, they could work, could be completely broken or anything in-between. Caveat emptor. However, please do report any working or not working devices from the list above - that's the only way to get the problems fixed.

In addition, the library supports every joystick/gamepad device supported by the SDL library. SDL2 is supported by passing a flag to the makefile: USE_SDL2=1 make

DO NOT USE THIS LIBRARY FOR ADDING SUPPORT FOR THE 3Dconnexion HARDWARE TO NEW APPLICATIONS!

This library is a messy hack emulating the proprietary 3Dconnexion SDK, in order to simplify the SecondLife client integration. If you are looking to integrate support for these devices into a new application, a much better solution is to use the event interface directly. An example of how to do this can be found here:

• http://jciger.com/files/software/linux/spacenav/spacenavig.c

If you are building a virtual reality application, then the best option is to use the VRPN library:

• http://www.cs.unc.edu/Research/vrpn/

VRPN supports all the devices above and many more in a transparent and abstract manner, so you don't have to add support for each different interaction device or tracker specially.

Another option simulating the official 3DConnexion driver is the Spacenav project:

• https://spacenav.sourceforge.net/