jamesbowman / electricdollarstore Goto Github PK

Enhancement: Product request - EDS module carrier boards for Raspberry Pi products - with Castellated edges too please

The br3 board is very handy. But there is no Rapberry Pi product board like the newer ab4 Arduino shield board. The br3 does not conform to Raspberry Pi Zero mounting holes.

A br3 equivalent for Raspberry Pi Zeros and Pico would be great. The RPi Zero should be able to fit 3 EDS modules. The Pico might only have room for two EDS modules. A full sized Raspberry Pi shield should fit 4 EDS modules like the Arduino.

Having proper mounting holes is really important. Supporting all 40 pins isn't - just that is required for I2C.

Regarding the board Raspberry Pi Zero and Pico, please consider also including I2C as Castellated edges as well - preferably for all four edges. This would allow multiple carrier boards to be joined/tiled together easily for larger projects - such as having more than 3 knobs & pots in a row, with multiple DIG2 above the pots. OR, have several carrier boards and parts for a homemade classic red LED alarm clock - internet enabled with a Pi Zero W or low powered by a Pico.