Welcome to the Raspberry Pi Documentation
This repository contains the Asciidoc source and the toolchain to build the Raspberry Pi Documentation. For details of how to contribute to the documentation see the CONTRIBUTING.md file.
NOTE: This repository has undergone some recent changes. See our blog post for more details.
Building the Documentation
Instructions on how to checkout the documentation
repo, and then install the toolchain needed to convert from Asciidoc to HTML and build the documentation site.
Checking out the Repository
Install git
if you don't already have it, and check out the documentation
repo as follows,
$ git clone https://github.com/raspberrypi/documentation.git
$ cd documentation
Installing the Toolchain
On Linux
This works on both regular Debian or Ubuntu Linux — and has been tested in a minimal Docker container — and also under Raspberry Pi OS if you are working from a Raspberry Pi.
You can install the necessary dependencies on Linux as follows,
$ sudo apt install -y ruby ruby-dev python3 python3-pip make ninja-build
then add these lines to the bottom of your $HOME/.bashrc
,
export GEM_HOME="$(ruby -e 'puts Gem.user_dir')"
export PATH="$PATH:$GEM_HOME/bin"
and close and relaunch your Terminal window to have these new variables activated. Finally, run
$ gem install bundler -v 2.2.15
to install the latest version of the Ruby bundle
command.
On macOS
If you don't already have it installed you should go ahead and install HomeBrew,
$ /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)"
Then you need to install Ruby,
$ brew install [email protected]
$ gem install bundler -v 2.2.15
NOTE: Homebrew defaults to Ruby 3.0 which is incompatible with Asciidoctor.
IMPORTANT: Homebrew has problems using /bin/zsh
, you may have to change your default shell to /bin/bash
.
Set up Homebrew Version of Ruby
If you're using csh
or tcsh
add the following lines to your .cshrc
or .tcshrc
,
setenv PATH /usr/local/bin:/usr/local/sbin:$PATH
setenv PATH /usr/local/opt/ruby/bin:${PATH}
setenv PATH ${PATH}:/usr/local/lib/ruby/gems/2.7.0/bin
setenv LDFLAGS -L/usr/local/opt/[email protected]/lib
setenv CPPFLAGS -I/usr/local/opt/[email protected]/include
setenv PKG_CONFIG_PATH /usr/local/opt/[email protected]/lib/pkgconfig
or if you're using bash
add the following lines to your .bash_profile
,
export PATH="/usr/local/bin:/usr/local/sbin:$PATH"
export PATH="/usr/local/opt/ruby/bin:$PATH"
export PATH="$PATH:/usr/local/lib/ruby/gems/2.7.0/bin"
export PATH="/usr/local/opt/[email protected]/bin:$PATH"
export LDFLAGS="-L/usr/local/opt/[email protected]/lib"
export CPPFLAGS="-I/usr/local/opt/[email protected]/include"
export PKG_CONFIG_PATH="/usr/local/opt/[email protected]/lib/pkgconfig"
NOTE: If you are running macOS on an Apple Silicon based Mac, rather than an Intel Mac, substitute /opt/homebrew/
for /usr/local
in the lines dealing with [email protected]
in the above block.
and then open a new Terminal window to make sure you're using the right version of Python and Ruby.
Install Dependencies
Go ahead and brew install
the other dependencies,
$ brew install python@3
$ brew install ninja
$ brew install gumbo-parser
$ pip3 install pyyaml
Install Scripting Dependencies
After you've installed the toolchain (on either Linux or macOS), you'll need to install the required Ruby gems and Python modules. Make sure you're in the top-level documentation/
directory (i.e. the one containing Gemfile.lock
and requirements.txt
) and then run,
$ bundle install
(which may take several minutes), followed by,
$ pip3 install --user -r requirements.txt
Building the Documentation Site
After you've installed both the toolchain and scripting dependencies, you can build the documentation with,
$ make
This will automatically use Ninja build to convert the source files in documentation/asciidoc/
to a suitable intermediate structure in build/jekyll/
, and then use Jekyll AsciiDoc to convert the files in build/jekyll/
to the final output HTML files in documentation/html/
.
You can also start a local server to view the built site by running,
$ make serve_html
As the local server launches, the local URL will be printed in the terminal -- open this URL in a browser to see the locally-built site.
You can revert your repository to a pristine state by running,
$ make clean
which will delete the build/
and documentation/html/
directories.
Licence
The Raspberry Pi documentation is licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA). While the toolchain source code — which is everything outside of the top-level documentation/
subdirectory — is Copyright © 2021 Raspberry Pi Ltd and licensed under the BSD 3-Clause licence.