error roslaunch realsense_camera realsense_r200_nodelet_standalone_preset.launch about realsense-ros HOT 12 CLOSED

Yes, this looks exactly like #26.

Did you attempt the solution noted?

Try adding your login account to the group video.

sudo adduser $USER video

You may need to log out and log back into the system to see the new group.

groups

In general, the video devices will be owned by root and set to group video:

$ ls -l /dev/video*
crw-rw----+ 1 root video 81, 3 Apr 12 18:02 /dev/video3
crw-rw----+ 1 root video 81, 4 Apr 12 18:02 /dev/video4
crw-rw----+ 1 root video 81, 5 Apr 12 18:02 /dev/video5

from realsense-ros.

I have attempted the solution noted. But I can not still solve my problem.

after I do ,
$ ls -l /dev/video*
crw-rw----+ 1 root video 81, 0 5月 10 16:45 /dev/video0
crw-rw----+ 1 root video 81, 1 5月 10 16:45 /dev/video1
crw-rw----+ 1 root video 81, 2 5月 10 16:45 /dev/video2
crw-rw----+ 1 root video 81, 3 5月 10 16:45 /dev/video3

from realsense-ros.

Did you try logging out and logging back in after making the group change?
The group membership only takes effect on login.

from realsense-ros.

Sorry,I tried your steps. Then, I can't still solve.
I can not launch cpp-capture.launch.
My result show

but running within QT creator works. show

from realsense-ros.

The fact that cpp-capture is failing in rs_create_context would imply that something is holding or not release the device.

In this issue you stated that you are using Video4Linux backend and NOT libuvc; can you please confirm that. It looks more like your problem is similar to IntelRealSense/librealsense#81 where libuvc was in use.

Can you confirm you are aren't using libuvb (which we don't support):
dpkg -l | grep libuvc
And that you have a current and/or patch kernel?
uname -a

from realsense-ros.

sorry , I'm not really good at linux.
Thank for your patient to teach me step by step.

I install by below
https://github.com/IntelRealSense/librealsense/blob/master/doc/installation.md#video4linux-backend

I install both Video4Linux backend and LibUVC backend.

As problem IntelRealSense/librealsense#81, I need remove LibUVC backend?

How can i do ?

from realsense-ros.

Okay, there is the problem; the directions are an either/or, not both. When you did the second install following the directions for libuvc, you replaced the librealsense library with the libuvc version which we don't support.

Repeat the installation steps for "Video4Linux backend".

from realsense-ros.

When I repeat the installation steps for "Video4Linux backend", it shows they exist. Then,I can not install again.

Should I change the file name , v4.4-wily , to v4.5-wily ?

Or how can I solve the problem?

Thank you.

from realsense-ros.

The kernel portion should already be installed.

Just change directory (cd) to where you you put librealsense source
cd
make clean
make && sudo make install

from realsense-ros.

Hi , I have three problem.

Problem1
I run sudo dmesg | tail -n 50 after I repeat the installation steps for "Video4Linux backend" .
It shows "failed to excute"

How do I solve?
However , I can run cpp-capture.

Problem 2
I run roslaunch turtlebot_bringupminimal.launch`.
Then I meet this problem.


This turtlebot_state is error.

Problem3
I run roslaunch realsense_camera realsense_r200_navigation.launch.

The device R200 can light.
But I run roslaunch realsense_navigation gmapping.launch.

It shows 0 device connected.

Sorry , help me solve problems.

Thank you.

from realsense-ros.

It appears you got the RealSense ROS node working.

For the navigation example, did you follow all of the directions in the README.md?

from realsense-ros.

Thank you, I have solved my problems. Thank you very much ~~
I wish that you can solve my problem that I meet for ROS development in the future.

from realsense-ros.