-- mcHF rev 0.8 UI board bootloader --

Note: This code is still somehow experimental. For older mcHF board revisions, please use the better supported fork of the code here: https://github.com/df8oe/UHSDR

This bootloader has rudimentary LCD support. Some HW testing(absolutely needed!) on each boot up is to be implemented. As it is can pass control to main firmware or be controlled by the DSP bootloader and reflash the main image.

How to compile:

• Download SW4STM32 studio (http://www.openstm32.org) and install

• On first run set your Workspace directory to something in MyDocuments, not the mcHF project directory! In Eclipse, unlike other IDEs, the Workspace is settings holder, not projects grouping method!

• Import the mcHF project from local dir or GitHub directly(point the path to firmware\mchf_ui_boot\project\mchf-pro-boot and make sure mchf-pro-boot is checked)

All mcHF downloads here: http://www.m0nka.co.uk/?page_id=5269

Krassi Atanassov, M0NKA mcHF project, 2012 - 2019