Hi There,
I am looking at the DR section of this repo and it mentions v2 of ICP.
I know v3 introduced a few changes, is the documentation sill valid?
As an example: https://github.com/ibm-cloud-architecture/refarch-privatecloud/blob/master/Resiliency/vmware-icp-dr.md
and all the links

Cheers, Giovanni

Latest links are:
wget -c https://mirror.openshift.com/pub/openshift-v4/clients/ocp/latest/openshift-client-linux-4.2.13.tar.gz
wget -c https://mirror.openshift.com/pub/openshift-v4/clients/ocp/latest/openshift-install-linux-4.2.13.tar.gz

logged in using Eduardo’s id. trying to configure the client. from Account/Configure client, I got a blank windows, instead of the kubctl commands. do you see the same?

The numbering is incorrect in this file, which can be fixed by indenting code blocks and the like so that the numbers continue.

Can you please update the document for 2.1.0.2 with bosh2 instead of bosh? There are many changes ...

@rbarcia @herness

In discussions about actual production deployments, there is enough interest in how to approach load balancers (external solutions like F5). There is also interest in how to leverage K8 Ingress in conjunction with the ICP Proxy. Can we get these documented in the architecture?

Having a table of content would be great. As setting up the cluster is a multiple day process, it will help a lot to jump around.

We are having issue in deploying the ICP over docker on master , during installation we are having below error.
FAILED - RETRYING: Waiting for auth-pdp to start (100 retries left).
FAILED - RETRYING: Waiting for auth-pdp to start (99 retries left).
FAILED - RETRYING: Waiting for auth-pdp to start (98 retries left).
FAILED - RETRYING: Waiting for auth-pdp to start (97 retries left).
FAILED - RETRYING: Waiting for auth-pdp to start (96 retries left).

and in logs we are getting the below error, will you please help us out in this issue ?

Following the documentation, has you deploy OpenShift via ansible prior to setting up the htpasswd users on the 'Master' nodes.
Ideally the section called 'Adding users via htpasswd' should appear before the OpenShift install playbook.

Version has changed from 4.2.0 to 4.2.10. The wget commands need to be updated to reflect that.

Hello

After following the instructions, the ICP installation goes well until:

TASK [config-k8s-nodes : Adding label to master nodes] *************************
changed: [localhost] => (item=172.31.62.172)

TASK [config-k8s-nodes : Adding label to proxy nodes] **************************
failed:

172.31.57.77 : ok=116 changed=35 unreachable=0 failed=0
172.31.60.100 : ok=116 changed=35 unreachable=0 failed=0
172.31.62.172 : ok=175 changed=54 unreachable=0 failed=0
172.31.63.35 : ok=116 changed=35 unreachable=0 failed=0
172.31.63.55 : ok=116 changed=35 unreachable=0 failed=0
localhost : ok=75 changed=12 unreachable=0 failed=1

I am not sure why this is happening. I can SSH and ping all nodes. All IP addresses are correct in the /etc/hosts

Thank you

Article is not reflecting the latest changes where management node was introduced.

refarch-privatecloud/Sizing.md

Not a biggy but the install-config.yaml example has the old vcenter server listed rather than the new one. I know people are supposed to change the bracketed data but some may not catch the change.

For step 10, configure ICp installer, the doc should add a link to configure LDAP if user chose to integrate with it.