git-pile is a set of scripts for using a stacked-diff¹ workflow with git & GitHub². There are a lot of different trade-offs for how this can work, git-pile chooses to be mostly not-magical at the cost of being best at handling multiple commits that don't conflict with each other instead of chains of pull requests affecting the same code. This approach was conceived by Dave Lee and I while working at Lyft, you can read more about that here.

1. Never think about branches again
2. Always test all of your changes integrated together on the repo's main branch, even if they are submitted as separate pull requests on GitHub
3. Avoid thrashing state such as file time stamps or build caches when switching between different work

The git-submitpr is the first script you run to interact with git-pile. It will submit a PR on GitHub with just the most recent commit from your "pile" of commits on your branch. It automatically uses your commit message to fill in your PR title and description:

$ git checkout main # always do work on your main branch
$ # do some work
$ git add -A
$ git commit -m "I made some changes"
$ git submitpr

Once you submit a PR you are free to move on and start working on other changes while still on the main branch.

• You can pass a different sha for submitting a PR for an older commit on the branch (by default HEAD is used). This is for the case where you forget to submit a PR for a commit, and then make a new commit on top of it.
• All other options passed to git submitpr are passed through to the underlying gh pr create invocation
• You can stack a PR using the --onto flag. For example: git submitpr --onto head~2
• If your GitHub repo supports auto-merge, you can pass --merge-rebase, --merge-squash, or --merge when creating the PR to enable auto-merge with the respective method. If enabling auto-merge fails for some reason, the PR is still submitted.

git-updatepr allows you to add more changes to an existing PR. For example:

$ git submitpr # Create the intitial PR
$ # get some code review feedback
$ # make more changes
$ git add -A
$ git commit -m "I fixed the code review issue"
$ git updatepr abc123 # pass the sha of the local commit from the original the PR

This will push the new commit to the PR you created originally.

• Pass --squash to squash the new commit into the initial commit on the PR, by default the new commit will be pushed directly.

git-headpr is similar to git-updatepr except it doesn't require you to have committed your changes manually, and it automatically updates the PR from the most recent commit in your pile, avoiding you having to grab the specific sha. For example:

$ git submitpr # Create the intitial PR
$ # get some code review feedback
$ # make more changes
$ git add -A
$ git status
... some changes are shown
$ git headpr

In this case git-pile will initiate a commit, and then run git updatepr with the most recent sha on your branch. This only works if you haven't made subsequent commits since the PR you want to update.

• You can pass --squash to squash the new commit into the initial commit from the PR (in this case you will not be promoted for a commit message)
• All other options are passed through to git commit

git-absorb is a more advanced version of git-headpr copied from the idea of hg absorb (but currently far less advanced). It intelligently chooses which commit your new changes should be added to based on which files you're changing and in which commits you changed them in previously.

This is useful for when you have many commits in your pile, and you go back to make a change to a previous PR. For example:

$ # change file1
$ # commit + submitpr
$ # change file2
$ # commit + submitpr
$ # go back and change file1 again
$ git status
... shows file1 is changed
$ git absorb

In this example git absorb will prompt you to commit, and then automatically run git updatepr updating your first commit that changed file1. It is functionally equivalent to:

$ git commit -m "..."
$ git updatepr sha123 # the sha from the first change

In the case that multiple commits in your pile touched the same files, git absorb will prompt you with a fuzzy finder to choose which PR to update.

If you have staged files, only those will be included in the commit (like normal), if you don't have any staged files git absorb will git add all your currently changed files before committing.

• You can pass --squash to squash the new commit into the initial commit from the PR (in this case you will not be promoted for a commit message)
• All other options are passed through to git commit

git-rebasepr rebases the PR for a given sha. This is useful in the case that your changes were functionally dependent so CI on your PR was failing until something else merged, or just in the case your PR is very old and you want to rebase it to re-run CI against the new state of the repo.

Example:

$ git rebasepr abc123 # the sha of the PR you want to rebase

brew install keith/formulae/git-pile

1. Add this repo's bin directory to your PATH
2. Install gh
3. Install fzy and python3 (required for git-absorb)

• Run gh auth status to make sure you have a valid login with gh, otherwise you'll need to sign in with it, run gh auth for instructions.

• Run git config --global rerere.enabled true to save conflict resolution outcomes so that in the case that you hit conflicts you only have to resolve them once.
• Run git config --global pull.rebase true to use the rebase strategy when pulling from the remote. This way when you run git pull you will be able to easily skip commits with git rebase --skip that were landed upstream, but have local conflicts in your pile.
• Run git config --global advice.skippedCherryPicks false to disable git telling you that some local commits where ignored when you git pull, this is the expected behavior of commits disappearing from your local pile after they're merged on GitHub.
• Configure git to stop you from accidentally pushing to your main branch with git config --global branch.main.pushRemote NOPE. To allow pushing to the main branch for specific repos you can set config just for that repo with git config branch.main.pushRemote origin

• Set GIT_PILE_PREFIX in your shell environment if you'd like to use a consistent prefix in the underlying branch names git-pile creates. For example export GIT_PILE_PREFIX=ks/. Note if you change this after using git-pile to create a PR, your PRs created before setting the prefix will not be updatable with the other commands.
• Set GIT_PILE_USE_PR_TEMPLATE in your shell environment if you'd like git-pile to attempt to prefill the description of your PR with the PR template file if it exists.
• Run git config --global pile.cleanupRemoteOnSubmitFailure true to automatically delete remote branches that mirror your local branch when submitting the PR fails. This makes it easier to run git submitpr again in the case you had a networking issue that causes the submission to fail. This is off by default to avoid potentially deleting a remote branch that somehow has commits that aren't on the local branch.

It's best to use git-pile with the squash-and-merge GitHub merge strategy. This is because git-pile squashes all commits that you push to a PR into one on your main branch, as is traditional with stacked diff workflows where each commit is an independent atomic change.

In the case where this doesn't work for you, either by accident or when contributing to an open source repo that uses a different merge strategy there are a few things to note:

• When you git pull your commit may not disappear cleanly. In this case I often use git rebase --skip when I know that the upstream should be the source of truth for a commit

In some cases you receive code review comments that you want to commit directly in the GitHub UI, if you do this your local commit becomes out of sync with the underlying branch that was created. In this case there are 2 important things to note:

• When you git pull you might have conflicts with your local commit, and it won't disappear cleanly. In this case I often git rebase --skip and accept the remote commit instead.
• If you want to push more changes to the same PR locally git updatepr will identify that changes were made on the upstream branch, and confirm that you want to pull them before pushing your own changes.

Using git-pile is easier in the case your changes do not conflict, but git-pile still does its best to handle resolving conflicts in the case they arise. For example if you submit 2 PRs that have conflicting changes, when you run git submitpr conflicts will arise when the commit is being cherry picked. In this case you must resolve the conflicts and run git cherry-pick --continue. Then when you are merging the PRs on GitHub, likely you will have to rebase one of the PRs after the first one merges to resolve the conflicts yet again. In this case I often run git rebasepr locally after one of the PRs merges to resolve the conflicts. If you have rerere.enabled set globally in your git config, you may only have to resolve the conflicts once.

Sometimes you might submit a PR, and realize it wasn't the right approach. Or you might want to submit multiple PRs touching related areas just for testing CI, or showing an example. In this case you might not want these commits sitting around on your pile forever. To avoid this I often "drop" commits from my pile, either by using git rebase -i and deleting the lines from the file, or by using this script. Be careful not to drop any un-submitted work when doing this.

git-pile supports basic PR stacking by passing the --onto SHA flag to git submitpr. This creates your PR targeting the underlying branch from the commit you pass. This assumes your other commit already has a PR. Unlike some other tools git-pile does not handle the merging and resolution of these PRs. When you merge the first PR in your stack, GitHub will automatically re-target your second PR to the correct branch. Unfortunately it will leave the initial commit in the branch, which means you have to git rebasepr your second commit, to make GitHub correctly reflect the changes in the PR.

As stated above one of the advantages of git-pile over other stacked diff workflows is relative simplicity. Here's how git-pile works when you run git submitpr:

1. It creates a git worktree in ~/.cache/git-pile for the current repository
2. It derives a branch name from your commit message's title
3. It branches off the upstream of your currently checked out branch
4. It checks out the new branch in the worktree, and cherry picks your commit onto the branch
5. It pushes the branch to the remote
6. It submits a PR using gh pr create

While this is a lot of steps, the nice part of this is that if you hit an issue with git-pile, or want fall back to a workflow you're more comfortable with, you can git switch to the underlying branch that git-pile created, and use normal git as normal. You can even swap between the git-pile workflow and not, as long as you're aware of the potential for introducing conflicts you'll have to resolve later.

Once the steps above have been done, all other commands like git updatepr follow steps similar to:

1. Checkout the previously created branch in the worktree
2. Cherry pick the new commit to the branch, squashing if requested (in the case of conflicts, you resolve them as usual and run git cherry-pick --continue)
3. Push the new branch state to the remote
4. Squash the new commit into the original commit on your main branch, treating it as a single change.