Niccolò Izzo IU2KIN [email protected]
Requirements are: C toolchain, binutils, libusb-1.0.
make
For Yaesu FT-70:
- Turn off your radio
- Remove the battery from the radio
- Put your radio in flashing mode by flipping the switch near the USB port up
- Plug the power supply
- Plug a standard micro USB cable between the radio and your PC
Flash an image with:
./h8300-flasher BINARY_IMAGE
Where BINARY_IMAGE
is an undecrypted raw image.
Put the switch back into normal position and power on.