hitochan777 / fcitx Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/fcitx
License: GNU General Public License v2.0
Automatically exported from code.google.com/p/fcitx
License: GNU General Public License v2.0
在 Gmail写信框中偶尔不能按2选字。
解决方案:
改一下~/.fcitx/config
里面有个热键配置,好像是“第二三候选词选择键”吧,默��
�值貌似是2.
改掉它就可以了。
特地重装了一遍看默认配置:
那个功能整个有问题,关掉即可。
默认是SHIFT,改成空,Ctrl+5重载配置。
当初把这个注释掉都不行
原见于:
http://www.newsmth.net/bbstcon.php?board=LinuxApp&gid=606483&start=606483&pno=3
还没有验证。
Original issue reported on code.google.com by [email protected]
on 7 Jul 2008 at 3:14
ooo 2.4里正常,升级到3.0以后调不出输入法,其他程序都正常
该有的环境变量应该都有了
XMODIFIERS="@im=fcitx"
XIM="fcitx"
XIM_PROGRAM="fcitx"
GTK_IM_MODULE="xim"
QT_IM_MODULE="xim"
Original issue reported on code.google.com by [email protected]
on 3 Jan 2009 at 7:57
When I start the fcitx, and then to start xlock or urxvt, the X will use
100% cpu and the desktop will very slowly.
fcitx 3.5/3.4.2 I used, slackware 12.1
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 2 Jun 2008 at 7:39
Attachments:
tar xjf fcitx.tar.bz2
cd fcitx ./configure;
make; # will make objects
make; # if we do it again, it should do nothing but check, but it
re-generate objects in data/ dir
Original issue reported on code.google.com by [email protected]
on 28 Apr 2008 at 4:02
符合xdg标注,而且不会造成$HOME下目录过多。
顺便也就修改一下那什么"直接将 getenv() 的结果传入 strcpy()
可能导致内存写越界"的问
题。。
带一个可以工作的补丁。
我尝试用"直接将 getenv() 的结果传入 strcpy()
可能导致内存写越界"里面提到的patch修
改,但是fcitx几分钟后就崩溃。
Original issue reported on code.google.com by [email protected]
on 21 Oct 2008 at 1:27
Attachments:
今天晚上花了两个小时在Fedora
10下面安装fcitx,总是处于不能激活的状态。参阅
了诸多帖子,都以失败告终。
然后gnome崩溃了一次,莫名其妙的激活了。汗的很异常。
是否能请开发组考虑利用google的wiki开始新的安装文档以及FAQ�
��类的建设工作?如
果需要人手,我可以贡献自己一点微薄的力量~
= =;
象这样莫名其妙的激活,我都开始怀疑自己有没有力量了。
Original issue reported on code.google.com by [email protected]
on 25 Dec 2008 at 2:11
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 14 Jan 2009 at 2:44
What steps will reproduce the problem?
1. svn checkout http://fcitx.googlecode.com/svn/trunk/ fcitx-read-only
2. ./autogen.sh --prefix=/usr
3. make
What is the expected output? What do you see instead?
应该正常编译不出错。编译过程中显示:
./createPYMB ./../data/gbkpy.org ./../data/pyPhrase.org
me.c Error!!!
Groups: 411
What version of the product are you using? On what operating system?
svn r123
Please provide any additional information below.
编译环境 Debian sid, up to
date。虽然出错,但不影响全拼输入法的正常使用。
Original issue reported on code.google.com by [email protected]
on 14 May 2008 at 1:53
fcitx似乎会安装一个空白的 /usr/share/fcitx/xpm
目录,能否进行处理?在某些系
统中会导致安装失败。
Original issue reported on code.google.com by [email protected]
on 21 Oct 2008 at 11:58
以前一直使用正常。在升级了xorg-server到1.5.3之后,在大部分q
t4程序(我用的是
kde4.1)中,按ctrl+space都调不出fcitx,无法输入中文。
但是在konsole这个qt4程序里,还可以正常使用fcitx;在所有的gt
k程序中,fcitx也
使用正常。
(那些EXPORT参数的方法都不能解决问题。)
现在用kmess和linux-fetion聊天,都要先在firefox里打完字,再贴��
�去,很不舒服。
Original issue reported on code.google.com by [email protected]
on 26 Dec 2008 at 1:59
What steps will reproduce the problem?
1. Compiling install
2. running
3. no chinese display ( i am using Wenqyizenhei)
What is the expected output? What do you see instead?
GUI have correct Chinese chipsets settings by default. For example, list
the major fonts can be used. So far, I am not sure how to alias WENQUNYI ZENHEI
What version of the product are you using? On what operating system?
Latest SVN. Ubuntu 8.10 with only GNU unifonts and WQY ZENHEI which support
Chinese.
Please provide any additional information below.
I have delete all other Chinese fonts.
Original issue reported on code.google.com by [email protected]
on 6 Nov 2008 at 12:43
What steps will reproduce the problem?
1. 打开Fedora 10所代eclipse 3.4
2. 关闭
3. 崩溃
What is the expected output? What do you see instead?
启动fcitx的gnome-terminal同时死掉。
What version of the product are you using? On what operating system?
Fedora Eclipse Platform
Version: 3.4.1
Based on build id: 20080911-1700
Please provide any additional information below.
eclipse 安装lomboz、subeclipse插件
Original issue reported on code.google.com by [email protected]
on 17 Nov 2008 at 1:39
What steps will reproduce the problem?
I:输入窗口抖动
非必现,但出现几率很大
在emacs中输入中文,输入一段时间后,经过若干次的Ctrl-Space��
�换,发现输入窗口
上窜下跳,极其难受
II:fcitx cpu占用100%
使用virtualbox,点击设置时非常容易出现fcitx 100%,然后emacs
rxvt都失去响应了
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
linux 2.6.24 Debian Fvwm2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 15 Jan 2009 at 6:36
最近在跟svn,发现好像维护的人,在一些个人设置上。不断��
�改变。
r154之前临时英文是左边的ctrl键,到r156就改成左边的shift键了
。
还有配色方案也是常常改。希望可以同一一下。
Original issue reported on code.google.com by [email protected]
on 5 Nov 2008 at 5:41
gentoo emacs-cvs with gtk USE
其他的 gtk 程序中可输入
fcitx 3.5的时候这个同样的emacs可激活输入法.
Original issue reported on code.google.com by [email protected]
on 7 Jan 2009 at 2:17
What steps will reproduce the problem?
1. Install latest fcitx-svn r168 via aur.archlinux.org
2. Add the following
export GTK_IM_MODULE=xim
export QT_IM_MODULE=xim
export XMODIFIERS="@im=fcitx"
killall -9 fcitx
fcitx -d &
in ~/.profile
3. Normally start X and log in Gnome
What is the expected output? What do you see instead?
It should start in silence, but fcitx hangs and cause 100% cpu usage.
What version of the product are you using? On what operating system?
fcitx-svn r168
Linux newtype 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:31:10 UTC 2008 i686
Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz GenuineIntel GNU/Linux
Gnome 2.24.2
Xorg 1.5.3
Please provide any additional information below.
I used
fcitx -d &> /tmp/fcitx.log &
in ~/.profile, and found that fcitx was just repeating receiving signal 11
whilt starting up.
Original issue reported on code.google.com by [email protected]
on 6 Jan 2009 at 2:16
config里面能不能设成什么就是什么?
现在无论设成CTRL_SPACE或者SHIFT_SPACE,
按CTRL_SHIFT_SPACE都会呼出小企鹅, 占用了IntelliJ
Idea的一个重要hotkey, 不爽.
Original issue reported on code.google.com by [email protected]
on 21 Nov 2008 at 3:06
What steps will reproduce the problem?
参考:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=430420
What is the expected output? What do you see instead?
程序不应该崩溃。程序出现段错误,并崩溃。
What version of the product are you using? On what operating system?
影响到所有版本。
Please provide any additional information below.
是否可以考虑用 snprintf() 来代替 strcpy(), strcat(),...?
Original issue reported on code.google.com by [email protected]
on 13 May 2008 at 1:29
最新的3.6rc已经没有configure
Original issue reported on code.google.com by kane.mx
on 7 Jan 2009 at 9:19
运行环境Debian Sid,一些桌面软件来自experimental,桌面环境KDE
4.1,正如刚才所说来自
experimental。使用fcitx
svn版本就会出现逛占CPU的问题,导致系统几乎没反应,只能��
�启
X。现在用fcitx.org上的070703测试版,目前发现这个版本用起来�
��是比较正常的。
Original issue reported on code.google.com by [email protected]
on 5 Jan 2009 at 4:00
version: svn 178
env: ubuntu 8.04
build opt: -g -Wall -O0
backtrace:
$ gdb --args ./fcitx -D
GNU gdb 6.8-debian
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu"...
(gdb) l
62
63 extern Display *dpy;
64 extern Window inputWindow;
65
66 extern Bool bIsUtf8;
67
68 extern HIDE_MAINWINDOW hideMainWindow;
69
70 int main (int argc, char *argv[])
71 {
(gdb) r
Starting program: /home/autumncat/src/fcitx/fcitx/src/fcitx -D
[Thread debugging using libthread_db enabled]
[New Thread 0x7f8b02f9a6e0 (LWP 17882)]
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f8b02f9a6e0 (LWP 17882)]
0x00000000004257d4 in MySetICValuesHandler (call_data=0x7fff0afb8cf0) at
xim.c:202
202 iInputWindowX = ConnectIDGetPos(connect_id)->x;
(gdb) w
Ambiguous command "w": watch, wh, whatis, where, while, while-stepping,
winheight, ws.
(gdb) where
#0 0x00000000004257d4 in MySetICValuesHandler (call_data=0x7fff0afb8cf0)
at xim.c:202
#1 0x0000000000425ea0 in MyProtoHandler (_ims=0x714140,
call_data=0x7fff0afb8cf0) at xim.c:409
#2 0x0000000000438e2a in _Xi18nChangeIC (ims=0x714140,
call_data=0x7fff0afb8cf0, p=0x2235e54 "\t", create_flag=0)
at i18nIc.c:720
#3 0x0000000000435cf9 in SetICValuesMessageProc (ims=0x714140,
call_data=0x7fff0afb8cf0, p=0x2235e54 "\t") at i18nPtHdr.c:844
#4 0x00000000004374a3 in _Xi18nMessageHandler (ims=0x714140, connect_id=9,
p=0x2235e50 "6", delete=0x7fff0afb8e6c)
at i18nPtHdr.c:1697
#5 0x000000000042f0b4 in WaitXIMProtocol (dpy=0x6a6cd0, win=4206262,
ev=0x7fff0afb8ec0, client_data=0x714140 "@+e")
at i18nX.c:489
#6 0x0000000000408dc7 in main (argc=2, argv=0x7fff0afb9078) at main.c:179
(gdb) l
197 iInputWindowX = (DisplayWidth (dpy, iScreen) -
iInputWindowWidth) / 2;
198 if (iInputWindowX < 0)
199 iInputWindowX = 0;
200 }
201 else
202 iInputWindowX = ConnectIDGetPos(connect_id)->x;
203
204 XMoveWindow (dpy, inputWindow, iInputWindowX,
ConnectIDGetPos(connect_id)->y);
205 }
206
(gdb) s
OnException (signo=2) at MyErrorsHandlers.c:59
59 {
(gdb)
61 fprintf (stdout, "\nFCITX -- Get Signal No.: %d\n", signo);
(gdb)
FCITX -- Get Signal No.: 11
63 switch (signo) {
(gdb)
88 }
(gdb)
Program received signal SIGSEGV, Segmentation fault.
0x00000000004257d4 in MySetICValuesHandler (call_data=0x7fff0afb8cf0) at
xim.c:202
202 iInputWindowX = ConnectIDGetPos(connect_id)->x;
(gdb) where
#0 0x00000000004257d4 in MySetICValuesHandler (call_data=0x7fff0afb8cf0)
at xim.c:202
#1 0x0000000000425ea0 in MyProtoHandler (_ims=0x714140,
call_data=0x7fff0afb8cf0) at xim.c:409
#2 0x0000000000438e2a in _Xi18nChangeIC (ims=0x714140,
call_data=0x7fff0afb8cf0, p=0x2235e54 "\t", create_flag=0)
at i18nIc.c:720
#3 0x0000000000435cf9 in SetICValuesMessageProc (ims=0x714140,
call_data=0x7fff0afb8cf0, p=0x2235e54 "\t") at i18nPtHdr.c:844
#4 0x00000000004374a3 in _Xi18nMessageHandler (ims=0x714140, connect_id=9,
p=0x2235e50 "6", delete=0x7fff0afb8e6c)
at i18nPtHdr.c:1697
#5 0x000000000042f0b4 in WaitXIMProtocol (dpy=0x6a6cd0, win=4206262,
ev=0x7fff0afb8ec0, client_data=0x714140 "@+e")
at i18nX.c:489
#6 0x0000000000408dc7 in main (argc=2, argv=0x7fff0afb9078) at main.c:179
...
Original issue reported on code.google.com by [email protected]
on 16 Jan 2009 at 1:15
讨论主题:
http://groups.google.com/group/fcitx-dev/browse_thread/thread/a378400f32374725/9
376bf467f5155ad?lnk=gst&q=man&rnum=1&hl=zh-CN#9376bf467f5155ad
已有的一个man的初稿:
http://fcitx-dev.googlegroups.com/web/fcitx-3.5_with_man.tgz?gda=OMpJzkcAAADBmbf
MFqIMM1YWD3OwUvRGtS6P2VOLdmkKLPTqA-UUF2G1qiJ7UbTIup-M2XPURDSPzNmUwZVGwoDdnWICWDn
0EcxZX1zmZ--bHsqOhsnbSA&hl=zh-CN
希望熟悉 Makefile 的能编译通过后提供一个 patch。
Original issue reported on code.google.com by [email protected]
on 28 Apr 2008 at 4:05
我用arch,是编译的sorceforge上的svn版本的。
发现070703后版本运行fcitx不需要参数,不需要&就是以daemon形��
�运行的。这样的版本无法保
存自造词。貌似fcitx是推出的时候才保存自造词的。
我只能用killall
-9才能让fcitx退出,这样当然无法保存了。登出在登录也是无�
��看到出现一个
pyusrphrase.mb,没有保存我的自造词
Original issue reported on code.google.com by [email protected]
on 21 Oct 2008 at 11:20
死活都调不出码表的输入法.还是现在设置不同了?
五笔才是fcitx的精华所在啊........
Original issue reported on code.google.com by [email protected]
on 9 Jul 2008 at 9:20
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=409999
Version: 1:3.4-1
原文如下:
Hi,
I'm using debian on my iBook-G4. fcitx is alwasy crashing when using
wubi input method even if I install a new debian box. The pinyin input
method is ok. When I switch to wubi input method, any keyboard stike
will casue fcitx crashed. The problem exists for more than 3 months, and
I have to downgrade fcitx to sarge version.
If you needs more information, please let me know.
Best Regards
Bin Tian
=====================================================================
此bug标记着Resolved。
iBook的cpu应该是PowerPC,大端字节序。但是3.4.3之后的代码,似
乎去掉了对DARWIN的支持
(搜索DARWIN),会不会导致这个bug重现?
Original issue reported on code.google.com by [email protected]
on 14 May 2008 at 1:55
Fcitx非常好用,我一直在用它,很喜欢它细致入微的设置,很
容易调整到最好用的状态。
我主要打98五笔,偶尔也打拼音,98五笔的码表是从海峰转来�
��。
但近来遇到有些字打不出来的问题,比如“囧”(lwmv),五笔��
�表里有这个字,但是打
不出来,因此建议Fcitx至少应支持GB18030的码表。
另外,utf8也不是什么坏东西,现在已经太普及了,为什么不�
��虑用呢?GB2312现在
太小了,兼容性也不好。
谢谢!
Original issue reported on code.google.com by [email protected]
on 29 Nov 2008 at 1:16
What steps will reproduce the problem?
1.
change in .fcitx/config
打开/关闭输入法=CTRL_SHIFT_SPACE
2.
restart fcitx
3.
to enable you can press ctrl-space or ctrl-shift-space
to disable you have to press ctrl-shift-space - like it is expected
as ctrl-space is a combination used in a lot of programming environments,
fcitx cannot be used there...
What version of the product are you using? On what operating system?
arch linux, fcitx 3.5.070703-1
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 10 Dec 2008 at 10:19
用doxygen整理出文档
Original issue reported on code.google.com by [email protected]
on 28 Apr 2008 at 4:07
1. 打开Firefox,进行一些输入,比如在论坛上发帖一类的
2.
切换到另一个Tab,进行同样的输入,看是否输入的第一个英��
�字符不会被当成是
中文编码,而是直接以英文输出,从第二个字母开始,被认��
�是中文编码
3. 切换到另一个程序,进行操作,让Firefox闲置一段时间
4.
切换回Firefox,进行文字输入操作,看看会不会有上面第2项提
到的问题
之前的fcitx版本,在第2步时一般都能复制问题,但是现在最��
�的版本,基本上只有
闲置较长一段时间后才会出现此问题
与Yuking确认过,他也偶尔有看到同样的问题
目前在所有的程序当中,似乎只有在Firefox下会有这样的问题
Original issue reported on code.google.com by [email protected]
on 25 Nov 2008 at 3:00
链接:
http://groups.google.com/group/fcitx-dev/browse_thread/thread/12c6844c44cf1ff8?h
l=zh-CN
之前发在fcitx-dev论坛了,这次在bug system中做个记录。
bug原因:对指针的强制类型转换,改变了数据的解析方式。
Original issue reported on code.google.com by [email protected]
on 17 May 2008 at 10:32
Hello,
fcitx is tagged in 3.5 but can't download from
http://code.google.com/p/fcitx/downloads/list, pease release it, thanks.
Original issue reported on code.google.com by [email protected]
on 5 Feb 2008 at 4:39
大家可以试试看,很容易重现的。
中 打到一半 丢了 "o" `
Original issue reported on code.google.com by [email protected]
on 28 Apr 2008 at 4:03
我是gentoo linux的用户,对portage中的ebuild稍微进行修改
但是在安装过程中出现一下信息,希望能加以修正。谢谢:
* QA Notice: Package has poor programming practices which may compile
* fine but exhibit random runtime failures.
* MainWindow.c:269: warning: implicit declaration of function ‘isprint’
Original issue reported on code.google.com by [email protected]
on 20 Jul 2008 at 7:44
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 14 Oct 2008 at 7:45
What steps will reproduce the problem?
1. 激活
2. 随便输入什么
3. 崩溃
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Archlinux,xorg1.5.3, nvidia177.82-1,KDE4
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 2 Dec 2008 at 6:13
使用自然码(码表在Linuxsir上有人提供过。)时,没输入一个
键,中文字符直接上
屏。连空格也不用。070703 之前的版本没有这个问题。
Original issue reported on code.google.com by [email protected]
on 28 Apr 2008 at 4:08
如题,操作系统为ubuntu 8.10 amd64
Original issue reported on code.google.com by qubicllj
on 31 Dec 2008 at 8:25
What steps will reproduce the problem?
1. 使用
2. 莫名其妙的100%,在双核CPU上则占一核的所有运算能力
3.
What is the expected output? What do you see instead?
平滑的运行
What version of the product are you using? On what operating system?
3.6rc Fedora10
3.5发布版无此现象
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 12 Jan 2009 at 3:27
Latest SVN 和 Ubuntu 8.04 OpenOffice 2.4.1 官方包。
输入过快会丢失字符---症状为拼音变为英文字母,而且这个��
�母出现在输入的两个字
之间。
Original issue reported on code.google.com by [email protected]
on 10 Sep 2008 at 3:06
sudo make install 后不知什么没装入。无法启用。但是装在 /home 里用没问题。
我用的20081104版本
Original issue reported on code.google.com by [email protected]
on 10 Nov 2008 at 3:58
这个的确比较怪异,fcitx cup/io 100%之后
QTerm和VirtualBox的界面显示就像没有加载任何Style一样,很简单
,丑陋
换到3.5之后一切恢复了正常。
Original issue reported on code.google.com by [email protected]
on 16 Jan 2009 at 1:50
What steps will reproduce the problem?
1. 启动 mlterm
2. 配置 fcitx 的中英快速切换为 L_SHIFT
3. 在 mlterm 中调出 fcitx的中文状态,然后按L_SHIFT
What is the expected output? What do you see instead?
fcitx应该自动切换到英文状态,而它没有这么做
Please use labels and text to provide additional information.
L_SHIFT 状态快速切换
Original issue reported on code.google.com by [email protected]
on 23 Oct 2008 at 1:02
Attachments:
1.在源码包里去掉PDF文档,文档完全可以使用code.google
2.去掉无用的输入法码表,以求精简,其实只要拼音和五笔2��
�功能。但可以方便得添
加码表。
3.完全转换所有源码文件到utf-8。
4.在code.google的Downloads中加入最新的源码包和deb安装包,或rpm�
��装
包。google有个上传脚本的。
5.充分考虑ubuntu用户群,因为他是人数最多的用户群。
6.未完待续。。
Original issue reported on code.google.com by Sevkme
on 5 Dec 2008 at 6:04
What is the expected output? What do you see instead?
希望 fcitx 能默认添加对 “郑码” 的支持。
特将我整理的二十万词库
“郑码表”文本寄给你们,可自由使用。
What version of the product are you using? On what operating system?
当前在用 fcitx-svn-163,Arch Linux。
Original issue reported on code.google.com by [email protected]
on 21 Nov 2008 at 12:25
Attachments:
见 http://sourceforge.net/projects/fcitx
Original issue reported on code.google.com by [email protected]
on 20 Oct 2008 at 2:38
What steps will reproduce the problem?
1. 输入
2. 没有
3. over
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 21 Nov 2008 at 9:04
我怎么改了个字号, fcitx的面板就回到难看的样子了?
Original issue reported on code.google.com by [email protected]
on 5 Dec 2008 at 12:32
fcitx
一直都很棒,尤其是其兼容性。我觉得对用户而言,最主要��
�问题还是默认界
面比较丑,虽然通过修改配置可以很容易美化,但修改配置��
�身又比较麻烦。如果可
以有图形化的配置修改功能,就非常理想了。
Original issue reported on code.google.com by [email protected]
on 27 Nov 2008 at 8:26
1、第一个字/词输入时候选框正常出现。
2、接下来就消失了
Original issue reported on code.google.com by [email protected]
on 16 Jan 2009 at 1:52
原文:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=454363
看看文件debian/im-switch/fcitx,内容如下:
XIM=fcitx
XIM_PROGRAM=/usr/bin/fcitx
XIM_ARGS=""
GTK_IM_MODULE=XIM
QT_IM_MODULE=XIM
DEPENDS="fcitx"
这个bug说XIM应该改成xim。我在网上查了一下,的确都是小写��
�。
Original issue reported on code.google.com by [email protected]
on 14 May 2008 at 2:14
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.