ros_pca9685 is a package for talking to the PCA9685 I²C PWM driver by NXP

• 16 individually controlled channels
• 12bit (4096 steps) registers both for on and off time
• 1MHz fast I²C bus interface with 30mA high drive capability on SDA output for driving high capacitive buses
• 40MHz to 1000MHz PWM frequency for all LEDs with internal 25MHz oscillator
• Operating power supply voltage range of 2.3 V to 5.5 V
• Six hardware address pins allow up to 62 devices on the same bus

Package tested with [Adafruit 16-Channel 12-bit PWM/Servo Driver] (http://adafruit.com/products/815)

How to configure Raspberry PI described [here] (https://learn.adafruit.com/adafruit-16-channel-servo-driver-with-raspberry-pi/overview)

    mkdir -p ~/pca_ws/src
    cd  ~/pca_ws
    catkin_init_workspace
    cd ~/pca_ws/src
    git clone https://github.com/dennn66/ros_pca9685
    cd ~/pca_ws/src/ros_pca9685/ros_pca9685/src/lib/
    git clone https://github.com/TeraHz/I2C
    git clone https://github.com/TeraHz/PCA9685
    cd ~/pca_ws
    catkin_make_isolated

    rosrun ros_pca9685 controller_sub

• /pca9685/servostate_to_controller (pca9685_msgs/ServoState): move servo (angle in range: -Pi .. Pi)
• /pca9685/pwmstate_to_controller (pca9685_msgs/PwmState) : set pulse margins (on_value: 0..4096, off_value: 0..4096)

   rostopic pub  /pca9685/servostate_to_controller pca9685_msgs/ServoState '{port_num: 1, servo_rot: 0.5, servo_type: 2}' --once
   rostopic pub  /pca9685/pwmstate_to_controller pca9685_msgs/PwmState '{port_num: 1, on_value: 0, off_value: 400}' --once

Stop all servos:

rostopic pub /pca9685/servostate_to_controller pca9685_msgs/ServoState '{port_num: 0, servo_rot: 0.0, servo_type: 0}' --once

Stop servo:

rostopic pub /pca9685/servostate_to_controller pca9685_msgs/ServoState '{port_num: 1, servo_rot: 0.0, servo_type: 0}' --once

or

  rostopic pub  /pca9685/pwmstate_to_controller pca9685_msgs/PwmState '{port_num: 1, on_value: 0, off_value: 0}' --once