Sample scripts that use a Siglent SPD3303X to charge NiMH batteries via SCPI

The scripts are not intended for critical usage - always asume it can be buggy.

To get this repository with all its submodules the following command might be of use

git clone --recurse-submodules https://github.com/HendriXML/XMLScripts-Project-BatteryCharging.git C:\BatteryCharging

What's needed to use this script?

• Siglent SPD3303X
• Siglent SDS1104X-E or SDS1204X-E (only required for the measurement script)
• NI VISA setup (only the bare minimum)
• Interpreter executable (64 bit Windows, developed by me)
• Script + Script libraries

Charges a battery until the voltage drops a certain amount.

Charges a battery until the voltage drops a certain amount. The voltage measurements are done using a scope