For the experimental setup to work, the decoy router code and client code must be using the same network card. For example, you could deploy the decoy router and client on two different VMs on the same machine.

For the purpose of the example, we'll assume we want to run the decoy router on virtual machine vm_d and the client on virtual machine vm_c. Both virtual machines have a network interface en0 which are connected to an internal network allowing the virtual machines to communicate. Also, vm_d has a network interface en1 which is connected to the internet.

We'll setup the decoy router virtual machine so that it's two interfaces are bridged. This would give the client virtual machine access to the internet. We'll use iptables to intercept downstream packets on the decoy router.

Run these commands with root access in the vm_d virtual machine to create the bridge

ifconfig en0 up
ifconfig en0 0.0.0.0
ifconfig en1 up
ifconfig en1 0.0.0.0

brctl addbr br0
brctl addif br0 en0 en1

dhclient br0

Download the code from https://decoyrouting.works.

pip install -r requirements.txt

We need to setup an iptables rule to capture the downstream packets from the overt. We'll assume we want to use Google as the overt destination. Find the GoogleChannel class in the file client/channels.py. The class has a host field (e.g. 172.217.17.32) which is the overt address the client will use. Use the address to enter the following command

iptables -A FORWARD -i br0 -s 172.217.17.32 -j NFQUEUE --queue-num 1

As a side note, if you observe that the decoy is not intercepting the overt packets make sure you have the br_netfilter module loaded

modprobe br_netfilter

And also:

sysctl -w net.bridge.bridge-nf-call-iptables=1
sysctl -w net.ipv4.ip_forward=1

Everything is now ready to run the decoy code

cd decoy
python capturepackets.py

Download the code in the client virtual machine and install the Python dependencies as explained above.

The client is using Google as an overt destination by default, if you wish to change this, you can do so by changing line 465 of client/client.py.

You will need to install phantomjs on the client virtual machine. Make sure it is installed and works before running the client.

Run the client

cd client
python client.py

The client's SOCKS server is running on port 2020. You may use a browser or http client (e.g. curl) to connect and request an overt website.