grodansparadis / can4vscp_beijing Goto Github PK

From Steve

Can you plesae try write/overwrite output control registers? I'm not able overwrite these, if I set new value and after click on update button shows same old value wich was there before.

Perhaps it is my inexperience, but I observed the following

I tried to control a output on the Beijing module from a button connected to the same Beijing module with a DM row. When I press the button the output on the Beijing module is not changed. The button event is received by the daemon. When I send “the same” event from the daemon (VSCP Sessions), the output is changed.

See attached pics

Change local output - Event from Daemon.jpg --> This will set the output of the Beijing module.

Change local output - Event from Beijing Port 0.jpg --> No output change on the Beijing module.

Change local output - DM row on Beijing module.jpg --> The DM row.

I attached the reg file from the Beijing module.

ON/OFF status not received when channels turned on/off in DM

Btw is there an alternative way to use local inputs to control local outputs? // In case there is no daemon to control it all.

Otherwise it will “cost” two DM lines (one for ON and one for OFF)? // Toggle is no option as a wrong startup could mess-up the toggle (i.e. button off --> lights on, button on --> lights off)

Bistable relays need a pulse. Add an action that can provide such a pulse with an adjustable 16-bit millisecond resolution.

The protection time is asynchronous to the one second clock. Each should rather be using there own clocks also for the one second counting.