grafblade / ritabot Goto Github PK

A Translation bot built using discord.js and a custom Google Translate API.

NEW: One Click Build with Heroku, For instructions Please go here.

1. Error Message Support Section.
2. Auto Reverse translation for the auto function.
3. !t tasks #TargetChannel Implementation.
4. Introduction of a Streamlined Command Handler. (This will be done as a New Project)
5. Discord.js Updated to version 12 (V1.3.0)
6. Limited Bot translation. (V1.2.2)

1. Whats New
2. Features
3. Usage
4. NEW Setting up a Bot with "Deploy to Heroku"
5. Setting up a Bot Manually
6. How to Update your Bot
7. How to Update your Database Manually
8. C-3PO to RITA Bot Migration
9. Heroku Database Support
10. Local Installation Support
11. Setup on a Raspberry Pi
12. Troubleshooting
13. Error Messages
14. Commands
15. All Build Statuses and CI Checks
16. Credits & License
17. Design Team
18. About Us

For full History, See Changelog

• New commands added (embed, bot2bot, settings updatedb)
  • embed command allows you to change the type of message that is sent to the translation channel, in embed format or standard text. Standard text shows the users avatar and name instead of the bot.
  • bot2bot allows for messages sent from other bots, in non embedded format to be translated as well. (Due to limitation this has been implimented but is disabled for now)
  • As the new variables above are stored in the database, they need new Columns to be added, as such updatedb will complete these actions.
• Major code changes, new code implementations will change the DB and produce errors on first build, but this is a safe version to update to. Follow the below instructions.
  • Step 1: Make a pull request and update from Master branch.
    • Once you update the bot and it initializes you WILL get a db error, this is normal. (we are working on suppressing these)
  • Step 2: !t settings updatedb
    • This will throw another error but it will build the missing columns.
    • The default value for embed is on and botbot is off.
    • Running this multiple times will cause error to be posted to webhook chan, this is a "Value exists" error. Preventing you from destroying the DB
  • Step 3: Completed, and now working.
    • Once you have completed Step 2, the bot will have come online, but it wont have fully Initialised.
    • To prevent a never ending loop of errors, the VERY FIRST message or command sent on the server will Initialise the DB fully. Meaning you will have to send that message again.
      • Please Note Due to Automatic dyno restarts the first message after each restart will share the same behaviour as above.
  • Alternative update method via command line, minimal GUI interface needed.
    • Prerequiste. Navigate to your Herkou bot Dyno overview page. And turn the active web worker off.
    • Step 1: Naviagte to the directory where you ran git clone for your fork of the RitaBot repository.
      • cd RitaBot
      • git status should return the following On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean if so preoceed to Step 2
      • if how ever you get the following messages you will need to resolve them before proceeding further.
        • Changes not staged for commit: you have the following options
          • Do this if you have changes you deam nesiciary to add only
            • (use "git add <modified file>" to update what will be committed) followed by git commit -m <commit message> and lastly git push master
            • If you are adding you own commits I'm assuming you know how to deal with potential merge conflicts and can appropriatly resolve them accordingly before rebase step.
          • The other and HIGHLY prefered method is to simply checkout the modifed files to avoid merge conflicts (use "git checkout -- . to discard changes all changes working directory)
            • Once you think you've gotten the branch back to working tree clean state by running git status one more time. You are ready to move on to Step 2
    • Step 2: Now just run the following commands in order
      • git remote add upstream https://github.com/ZyC0R3/RitaBot.git
      • git fetch upstream
      • git checkout master
      • git rebase upstream/master
      • git push -f origin master (Note you will only have to use the -f flag for the first psuh)
        • enter your username and password from your Github account that's linked to the bot to complete the git push
      • Restart your stopped Web Dyno on the Heroku website.
      • Go to Depploy page on your Heroku app overview, scroll to the bottom and click Deploy Branch at the bottom in the Manual Deploy section.
    • Congrats update to new bot is complete. You can verify the update by checking the version of the bot after it finishes rebooting with the trusty !t stats command
• Added in command triggers and command deletion to clean up command channels.
• Custom Emoji's are now supported and will be sent with the translated message correctly, with the exception of a few languages.
• DM Translation have been disabled as it has been identified they never worked as intended. they will be re-introduced in a later update.
• Various Security vulnerabilities fixed.
• Dev Dependencies core to this bot, the google-translate-api & google-translate-token & gulp-watchhave been updated
• eslint has been replaced with babel-eslint
• !t settings updatebot Has been DISABLED - This is not needed as of yet and with the similarities to the !t settings updatedb command it may cause issues.
• Deploy with Heroku Setup and integration.

• No Code changes, just URL updates for New name of Bot
• Published to NPM
• Non code changes will be appended with Version-** from now on.
• Various Spelling mistakes in ReadMe have been corrected.
• Dev Dependencies core to this bot, the google-translate-api & google-translate-token have been updated
• Setup on a Raspberry Pi instruction Section added.
• gulp-watch updated dependencies. (Moved to Local repository as it was out-of-date and full of Security Issues.)
• Patch for Chinese language support.
• Various Security vulnerabilities fixed.
• Various commands re-activated.

• Translate custom messages
• Translate messages by reacting with flag emoji
• Translate last message(s) in channel
• Translate to multiple languages at once
• Automatic translation of channels with option to forward translations to users or separate channels.
• Supports 100+ languages
• Send translations using author username and avatar using Webhooks
• Send files to other channels
• Cross-server translations (Please Contact Artanis_#2340 regarding this)

• Create your own with the instructions below.
• Write !translate help or !t help for a list of commands.
• Enter the command !t help modules to get a list of all help commands, these show how to use each command.

• For an easier to read article regarding updating/creating your RITA Application, please go here

If you are looking to set up a New Bot then follow the instruction below, If you already have a Heroku Bot Using C-3P0 then Scroll down for instruction on how to migrate your translation settings. P.S Please star the repo by clicking the star icon in the top right

This Method does not need you to Fork this repository, you can run your bot straight off of the Rita Master Branch. For update instructions click here

• Give app a friendly name and click the Create App button
  • I like the name C-3PO, but feel free to pick something different if you fear George Lucas's wrath. Maybe C-4PO
• Take note of the apps CLIENT ID, you will need it later
• Scroll down to the Bot section
• Click the Create a Bot User button
• Click the Yes, do it! button
• Copy the bot's TOKEN, you will need it later

• In the custom variable of DISCORD_TOKEN put in the copied token of your created bot.
• DO NOT CHANGE the NODE_MODULES_CACHE Variable unless you know about Heroku Caching.
• If you with to use Webhook Debug logging:
  • Fill in DISCORD_DEBUG_WEBHOOK_ID & DISCORD_DEBUG_WEBHOOK_TOKEN, For instructions go here
• Once installed, Go to the Overview tab and click configure dynos. Turn off the default web npm start dyno and turn on the worker node src/bot.js dyno. Your bot will now be up and running!

• Replace the CLIENTIDGOESHERE string in the following URL with your own apps client id from Step 1:
  • https://discordapp.com/oauth2/authorize?&client_id=CLIENTIDGOESHERE&scope=bot&permissions=8
• Visit the resulting URL and add your bot to any server where you have admin privileges.
• Once added, your bot should show up more or less instantaneously. Type !t help within the discord chat for more details on how to use it. Happy translating!

To deploy a free translation bot that you can add to your discord server, follow these easy steps.

• If you don't yet have a Github account, create one! It's free and easy.
• Click here or use the button in the upper righthand side of this page to fork the repository so that it will be associated with your Github account.

• Give app a friendly name and click the Create App button
  • I like the name C-3PO, but feel free to pick something different if you fear George Lucas's wrath. Maybe C-4PO
• Take note of the app CLIENT ID, you will need it later
• Scroll down to the Bot section
• Click the Create a Bot User button
• Click the Yes, do it! button
• Copy the bot's TOKEN, you will need it later

• Create a new app. It's name must be unique and composed of all lowercase letters and dashes. Something like yourname-discordbot is fine

• Under Deployment Method select Github. Connect to your Github account and search for this repository by name.

• Scroll down to the manual deploy section, and select the Master branch. Click deploy branch, and wait for the successfully deployed message.

• Go to the Resources tab and look for the addons section. Search 'Postgres', and add a 'Hobby Dev - Free' version of Heroku Postgres. This will be automatically attached as your bot's database.

• Go to the Settings tab. Click to reveal Config Variables, then add then add the following:

  • KEY: = DISCORD_TOKEN
    • Value: = Your discord bot's token that you copied earlier.
  • KEY: = NODE_MODULES_CACHE
    • Value: = false
    • This is to ensure that when the bot updates it does not use any old Dependencies that Heroku has stored and gets fresh ones from the package.json file

• Go to the Overview tab and click configure dynos. Turn off the default web npm start dyno and turn on the worker node src/bot.js dyno. Your bot will now be up and running!

• Make sure that you have added the Heroku Postgres Addon in the Resources Tab of Heroku or else your bot shall not run!

• If you have any issues running your bot join our Discord Server

• Replace the CLIENTID string in the following URL with your own apps client id from Step 2:

  • https://discordapp.com/oauth2/authorize?&client_id=CLIENTID&scope=bot&permissions=8

• Visit the resulting URL and add your bot to any server where you have admin privileges.

• Once added, your bot should show up more or less instantaneously. Type !t help and !t help modules within the discord chat for more details on how to use it. Happy translating!

• You must have a bot already running on your server, if not then refer to Setting up a New Bot

• Complete a Pull Request from the master Branch of ZyC0R3/Rita to your master branch
  • Detailed instructions with example can be found here

--- OR ---

• Simply Fork this repository if you have not done so already, or if you are updateing from the "Deploy to Heroku" method.
  • Click here or use the button in the upper righthand side of this page to fork the repository so that it will be associated with your Github account.

• Log in to your Heroku account.
• Select the bot you made in step 3 of Setting up a New Bot
• Under Deployment Method make sure you have Github selected, ensure Connect to GitHub has the correct repository selected, Scroll down to the manual deploy section, and select the Master branch. Click deploy branch, and wait for the successfully deployed message.

• You will need to run three commands for your database to be updated to the new versions needs. Your bot shall not function until all of these have been run.
• Please run the following commands in consecutive order:
  • !t settings updatedb
  • !t settings dbfix
  • !t embed on/off (you can decide which way to send messages and change this value at any time).

With 1.2.1 there comes a change to the database, the Servers table needs to new columns.

You can run the !t updatedb to do this automatically, or if you want to do this manually then there are certain formats you need to use to have the database work correctly. Below you can find the SQL queries you will need to run to create these.

See Heroku Database Support for more info

• ALTER TABLE public.servers ADD COLUMN "embedstyle" character varying(8) COLLATE pg_catalog."default" DEFAULT 'on'::character varying;
• ALTER TABLE public.servers ADD COLUMN "bot2botstyle" character varying(8) COLLATE pg_catalog."default" DEFAULT 'off'::character varying;

• ALTER TABLE servers ADD COLUMN "embedstyle" character varying(8) DEFAULT 'on'
• ALTER TABLE servers ADD COLUMN "bot2botstyle" character varying(8) DEFAULT 'off'

If you already have a Heroku Bot Using C-3P0

• Make sure you have completed the following steps before attempting to migrate translation settings.

1. You have an already up and running C-3P0 Bot.
2. You are using Heroku to run the old version.
3. Make sure you do not disable, reset or delete your database (preferably Postgres from Heroku)
4. You have already completed a Pull Request from the master Branch of ZyC0R3/Rita to your master branch.

• Go to Heroku and click your app of C-3PO, and locate the Deploy section. Scroll down until you see the current fork your C-3PO bot is running off of, next to it there should be a button saying Disconnect
• Next click search on repositories and select your fork of this project and wait for it to load. Once that is completed you need to Deploy the 'Master' Branch/Version of the bot.
• Wait for it to finish deploying and you should be good to go. Turn on your worker dyno (if it was not already) and make sure your DISCORD_TOKEN is connected in the variables section in Settings. All data from your previous C-3PO bot should be saved in the database of Postgres as long as you do not delete it and will connect to all the previous channel translation connections. Happy Translating!

Sometimes you need to edit the Database manually, This is not something you should be playing around with unless you really know what you are doing.

1. Know that you are doing, if you don't then don't touch the DB. Simple.
2. Download and Install Postgres Admin 4, Located Here or Here. This guide will be for Windows, but it shouldn't be much different for any other OS.
3. Locate your credentials for you Heroku Database, Log in to Heroku > Select your App > Click Resources > Click Heroku Postgres > Click Settings > Click View Credentials (Note: Heroku rotates credentials periodically and updates applications where this database is attached.)

For a fresh install of pgAdmin, the dashboard likely contains only one server. This is your local server, Ignore this.

1. Right click server(s) > create > server …
2. Fill out the following:

• Name: This is solely for you. Name it whatever you want, I chose ‘Heroku-Run — On’

Under the connection tab:

• Hostname/Address: This is the host credential you located in Step 3. It should look like **-**-**...amazonaws.com
• Port: Keep the port at 5432, unless your credentials list otherwise
• Maintenance databaseL This is the database field located in Step 3 Below.
• Username: This is the user field in the credentials
• Password: The password field located in Step 3. I highly advise checking save password so that you don’t have to copypasta this every time you want to connect.
• In the SSL Tab, mark SSL mode as require

At this point, if we were to hit ‘save’ (please don’t), something very strange would happen. You’d see hundreds if not thousands of databases appear in pgAdmin. This has to do with how Heroku configures their servers. You’ll still only have access to your specific database, not those of others. In order to avoid parsing so many databases, we have to white list only those databases we care about.

1. Go to the Advanced tab and under db restriction copy the database name (it’s the same value as the Maintenance Database field filled earlier).
2. Click Save/Connect and you are done. Edit away.

The bot can also be run locally without Heroku. The local setup requires more steps since the database needs to be setup and the development tools need be installed. Start with the steps 1 and 2 in Setting up a New Bot and the continue as follows:

Any Database that runs with SQL Sequelize ('https://sequelize.org/master/') can be used. My recommendation is to use the SQL Lite database since the setup is fast and access is easy. Copy the connection details to the database for the next step. Example: The connection to a sqlite database with the name database.db stored at the same level of this README file would be ./database.db.

Copy the existing .env.example file and name it .env. Edit the Values of DISCORD_TOKEN, DISCORD_BOT_OWNER_ID and the DATABASE_URL according to the values that you copied earlier.

• DATABASE_URL needs to be the path to the database file (once you install SQLite it will create a database for you in the path you put...)
• Example - DATABASE_URL = C:\Admin\Rita_Development\test.db

Install nodejs from https://nodejs.org/en/

Run npm install -g gulp in your console to install gulp. Build the bot code using npm run-script build and run the bot with npm run-script start in the command consolde. Make sure the command console is specific to the RITA Folder

• Replace the CLIENTID string in the following URL with your own apps client id: https://discordapp.com/oauth2/authorize?&client_id=CLIENTID&scope=bot&permissions=8
• Visit the resulting URL and add your bot to any server where you have admin privileges.
• Once added, your bot should show up more or less instantaneously. Type !t help within the discord chat for more details on how to use it. Happy translating!

We recommend to initially run your bot in a local environment on your laptop before you run the translator on a Raspberry Pi. The local setup allows you to get familiar with the setup and the settings.

The following description allows a headless configuration. Only a network connection is required. This description is explicitly for running the bot on a Raspberry Pi 4, but the setup should be similar for earlier version.

Recommendation: run it locally first before putting the code on pi. Easier to ensure that .env variables are setup correctly.

Download the minimal image of Raspbian (https://www.raspberrypi.org/downloads/raspbian/). This setup is based on Raspbian Buster Lite, July 2019.

Use balenaEtcher(https://www.balena.io/etcher/) to write the image on your SD card.

For more Information: See https://www.raspberrypi.org/documentation/installation/installing-images/README.md

Enable SSH by placing a file named “ssh” (without any extension) onto the boot partition of the SD card.

• Pop your prepared SD card, power and a network cable into the Pi.
• Find your Pi's IP Address. Check your Router's DHCP allocation table or use a mobile app like Fing (https://play.google.com/store/apps/details?id=com.overlook.android.fing) to find the IP of Pi.
• Install WinSCP and Putty on your Laptop.
• Start Putty and login into your Pi. Username: pi, PW: raspberry. Change your password with 'passwd'.

• Type raspi-config and change your locales
• Update the package lists from repositories: sudo apt-get update
• Update your repositories: sudo apt-get dist-upgrade

The fastes way to install the current node and npm versions (https://nodejs.org/en/download/) was to follow the description from nodesource (https://github.com/nodesource/distributions/blob/master/README.md):

• Get the source: curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash -
• Install: sudo apt-get install -y nodejs
• Check version: node -v and npm -v

It is recommend to install git and pull from your fork or main:

• Install git: sudo apt-get install git
• Create the folder for the source: mkdir Rita
• Clone the repository: git clone https://github.com/ZyC0R3/RitaBot.git
• Checkout the branch you need: git checkout --track origin/1.2.0-6

Alternative: move the source code with WinSCP from your local environment to the Pi.

Install sqlite3 with sudo apt-get install sqlite3.

Create an empty database file (sqlite3 database.db)and call .tables)

Use WinSCP to copy your .env file from your local environment to the Pi.

• Install gulp is installed: sudo npm install -g gulp (not sure if still necessary)
• Make sure you are in the Rita folder
• Get and install all packages of RITA: npm install
• Build the code: npm run-script build
• Start the bot: npm run-script start

There are different ways to make the bot initialize at startup. The following description is based on init.d and update-rc.d:

• Create a init.d script: Edit the script template in .pi/translate_bot if necessary and copy it to the folder /etc/init.d/ with sudo mv .pi/translate_bot /etc/init.d/.
• Make the file executable: sudo chmod +x /etc/init.d/translate_bot
• Update the system script links: sudo update-rc.d translate_bot defaults
• Now, you can interact with the bot service with commands sudo service translate_bot start, sudo service translate_bot status and sudo service translate_bot stop
• The logging will be in /var/log/translate_bot.err and /var/log/translate_bot.log
• Reboot and hope everything is running smooth: sudo reboot
• Enjoy (or return to step 4 in Setting up a New Bot if you haven't done yet)

• You can set up debugging Webhooks using the following steps
  1. Create a new channel on your server to receive the Webhooks, let's say #Webhooks.
  2. Go to Server Settings -> Webhooks -> Create Webhook. Select the #Webhooks channel, then copy the Webhook's URL. It will look something like https://discordapp.com/api/webhooks/012345678901234567/VCj9yOOtJF9VCm-BU2F9xrbnoWD5gBZZ-UU1mZHcxi5VLgr3bPb9NanRJM8YD9cpBisL
  3. In the Settings tab of your Heroku app add the following Config Variables (values extracted from your URL):
     • DISCORD_DEBUG_WEBHOOK_ID : 012345678901234567
     • DISCORD_DEBUG_WEBHOOK_TOKEN : VCj9yOOtJF9VCm-BU2F9xrbnoWD5gBZZ-UU1mZHcxi5VLgr3bPb9NanRJM8YD9cpBisL
  4. Restart your app's worker node src/bot.js dyno, and you will begin to receive debugging messages in your #Webhooks channel.
• If your bot in unresponsive, the first thing to check is Heroku. Log in and manually restart the worker node src/bot.js dyno.
• For further troubleshooting, it's helpful to install the Heroku command line interface. Once installed you can login from a terminal with heroku login and check your apps logs with heroku logs --tail -a <your-app-name>
• If you are unable to solve a problem yourself, report it with as much detail as possible in this repository's issue tracker.

This section/feature is being Created, Check back soon or join the Support Discord Server.

• Translate Custom Text
• Translate by Reaction
• Translate Last Message
• Translate Channel
• Settings
• Misc. Commands

This project was originally released by Aziz under the MIT license. He chose to take the project private/commercial at version 0.4.2 Beta. Bobby Johnson forked the project and renamed it Louie after his dog. AlooAkbar forked Louie and added the necessary modifications for simple and free deployment of the bot using Heroku. ZyC0R3 Picked up the fork and as part of a team fixed over 200 errors and brought it in to the modern age, All would like to thank Aziz for his hard work and making these early versions OSS so that others may learn and build on his hard work to share with the community.

• Zycore / ZyC0R3
• Artanis / ArtanisTheOne
• Balthazar / Jshep89
• Z3US / cyberlooper
• Maddious / MadIndex
• defqon.1 / wdaniel1985

Rita is the culmination of many things, it started with a mobile game, a community of gamers, a discord server of different languages and a desire to all be understood. She is a Real-Time Translator Bot for use on Discord, Self-hosted on Heroku (or a local install) and Completly 100% Free. She is maintained by a small group of users, each with different backgrounds and some learning as we go.

The mobile game itself would get old, fast. The community around it, however, is what kept us going. The one downside was we didn't all speak the same language. The game we played translated our conversations for us but Discord didn't, so the server admins used a translation bot called C-3P0. This introduction is the start of the story.

There are loads of different translation bots out there, some are amazing, some are expensive, some are free but have limits, and others are just rubbish. C-3P0 checked all these boxes.

Originally called discord-translator and made by Aziz, then forked By NotMyself and renamed Louie, forked again By AlooAkbar and renamed C-3P0, its code was neglected, not maintained, left outdated and iterations made private for commercial gains.

I and a group of fellow C-3P0 users decided that collectively we could do better, plagued with crashes, API changes, relentless bugs and issues, the drive to make something better was born.

Rita's history and various iterations each added something extra, it just needed to be brought together and molded, molded into something amazing, moulded into Rita. The Real-Time Interchangeable Translating Assistant.

Released under MIT license.