The "brains" of the Farmbot Project
Instalation should be fairly straight forward, you will need a computer for this step. (everything after this can be set up on a mobile device.)
- download and install Etcher.
- download the latest release.
- insert an SD Card into your PC.
- open Etcher, and select the
.img
file you just downloaded. - select your SD Card.
- Burn.
- download the latest release.
dd if=</path/to/file> of=/dev/<sddevice> bs=4
or use Etcher.
- Plug your SD Card into your RPi3
- Plug your Arduino into your RPi3
- Plug your power into your RPi3
- From a WiFi enabled device*, search for the SSID
farmbot-XXXX
- Connect to that and open a web browser to http://192.168.24.1/
- Follow the on screen instructions to configure your FarmBot. Once you save your configuration FarmBot will connect to your home WiFi network and to the FarmBot web application.
* If you are using a smartphone you may need to disable cellular data to allow your phone's browser to connect to the configurator.
To update the firmware on the Raspberry Pi simply use the "update" button on the web application. There is no need to reinstall the entire OS.
See the FAQ If your problem isn't solved there please file an issue on Github