Work inspired by OctoPrint-PSUControl and TP-Link WiFi SmartPlug Client, this plugin controls a TP-Link Smartplug via OctoPrint's nav bar.

Install via the bundled Plugin Manager or manually using this URL:

https://github.com/galfinite/OctoPrint-TPLinkSmartplug/archive/master.zip

Once installed go into settings and enter the ip address for your TP-Link Smartplug device. Adjust additional settings as needed.

• IP
  • IP or hostname of plug to control.
• Label
  • Label to use for title attribute on hover over button in navbar.
• Icon Class
  • Class name from fontawesome to use for icon on button.
• Warn
  • The left checkbox will always warn when checked.
  • The right checkbox will only warn when printer is printing.
• GCODE
  • When checked this will enable the processing of M80 and M81 commands from gcode to power on/off plug. Syntax for gcode command is M80/M81 followed by hostname/ip. For example if your plug is 192.168.1.2 your gcode command would be M80 192.168.1.2
• postConnect
  • Automatically connect to printer after plug is powered on.
  • Will wait for number of seconds configured in Auto Connect Delay setting prior to attempting connection to printer.
• preDisconnect
  • Automatically disconnect printer prior to powering off the plug.
  • Will wait for number of seconds configured in Auto Disconnect Delay prior to powering off the plug.
• Cmd On
  • When checked will run system command configured in System Command On setting after a delay in seconds configured in System Command On Delay.
• Cmd Off
  • When checked will run system command configured in System Command Off setting after a delay in seconds configured in System Command Off Delay.

I programmed this plugin for fun and do my best effort to support those that have issues with it, please return the favor and support me.