This repository contains Official docker images of OpenWISP. Designed with horizontal scaling, easily replicable deployments and user customization in mind.

The sample files for deployment on kubernetes are available in the kubernetes/ directory.

Images are available on docker hub and can be pulled from the following links:

• OpenWISP Base - openwisp/openwisp-base:latest
• OpenWISP Dashboard - openwisp/openwisp-dashboard:latest
• OpenWISP Radius - openwisp/openwisp-radius:latest
• OpenWISP Controller - openwisp/openwisp-controller:latest
• OpenWISP Network Topology - openwisp/openwisp-topology:latest
• OpenWISP Nginx - openwisp/openwisp-nginx:latest
• OpenWISP Postfix - openwisp/openwisp-postfix:latest
• OpenWISP Websocket - openwisp/openwisp-websocket:latest

The configuration for openwisp images using environment variables is available here. Additionally, you can further customize your setup by mounting custom configuration files for which instructions are available here.

1. Deployment: Steps for a sample deployment of these images in production.
2. Disabling Services: Instructions to disable services you don't want to use, like when using database-as-a-service, you don't need postgresql container.
3. Build (Development): Instructions for building your custom images.

1. Kubernetes
2. Docker Compose

The following are steps of a sample deployment on a kubernetes cluster. All the files are present in kubernetes/ directory of this repository. The following assumes the reader knows basics of kubernetes.

1. (optional) Setup a Kubernetes Cluster: A guide for setting up the cluster on bare-metal machines is available here and the guide to get started with kubernetes-dashboard (Web UI) is available here.

2. Changes for your cluster:

   2.1. externalIPs in Service.yml should to be your cluster's externalIPs

   2.2 ingress in Ingress.yml should to be your cluster's loadbalancer IPs.

   2.3 <SERVICE-NAME>_DOMAIN variables in ConfigMap.yml should to be your domain names.

3. If you are doing bare-metal setup, follow the steps below to setup nfs-provisioner. If you are using a provider like GKE or Amazon EKS your provider may have this ready out-of-the-box (If your provider doesn't provide it and you can't make these changes you need to alter the PersistentVolumeClaim.yml file):

   3.1. Install NFS requirements: sudo apt install nfs-kernel-server nfs-common

   3.2. Setup storage directory:

   sudo mkdir -p /mnt/kubes
   sudo chown nobody: /mnt/kubes

   3.3. Export the directory file system - inside the /etc/exports file add line: /mnt/kubes *(rw,sync,no_root_squash,no_subtree_check,no_all_squash,insecure) and then export sudo exportfs -rav

4. Setup helm and install the requirement(s):

   4.1. NFS Provisioner: helm install --set storageClass.name=nfs-provisioner --set nfs.server=<ip-address> --set nfs.path=/mnt/kubes stable/nfs-client-provisioner

   4.2. Setup Cert-Manager to take care of SSL certificates.

5. (optional) Customization: You can change any of the variables from the list here to trailer to your requirements. You need to change the values in ConfigMap.yml.

   • The ConfigMap with name postgres-config will pass the environment variables only to the postgresql container.
   • The ConfigMap with name common-config will pass the environment variables to all the openwisp containers where the values are applicable except the postgres instances.

6. Apply to Kubernetes Cluster: You need to apply all the files in the kubernetes/ directory to your cluster. Some ReplicationControllers are dependant on other components, so it'll be helpful to apply them at last. This is the recommended order:

kubectl apply -f ConfigMap.yml
kubectl apply -f ClusterIssuer.yml
kubectl apply -f PersistentVolumeClaim.yml
kubectl apply -f Service.yml
kubectl apply -f Ingress.yml
kubectl apply -f ReplicationController.yml

NOTE: Containers will take a little while to start their work. You can see the status on the Web UI or on CLI by kubectl get all command.

Testing on docker-compose is relatively less resource and time consuming.

1. Install docker-compose: pip install docker-compose

2. Change the following options according to your system: DJANGO_SECRET_KEY, DB_USER, DB_PASS, DJANGO_DEF_EMAIL, DASHBOARD_DOMAIN, CONTROLLER_DOMAIN, RADIUS_DOMAIN, TOPOLOGY_DOMAIN. Optionally, you may change any other setting as well. A detailed document of the available variables can be found here.

3. Pull all the required images to avoid building them. (Building images is a time consuming task.)

docker pull openwisp/openwisp-base:latest
docker pull openwisp/openwisp-dashboard:latest
docker pull openwisp/openwisp-radius:latest
docker pull openwisp/openwisp-controller:latest
docker pull openwisp/openwisp-topology:latest
docker pull openwisp/openwisp-nginx:latest
docker pull openwisp/openwisp-postfix:latest
docker pull openwisp/openwisp-websocket:latest

4. Run containers: Inside root of the repository, run docker-compose up. It will take a while for the containers to start up. (~1 minute)

5. When the containers are ready, you can test them out by going to the domain name that you've set for the modules.

Note:

• Default username & password are admin.

Note: If you are using pipenv, remember that changing the values in .env file does nothing because .env is also a special file in pipenv, you need to change the values in .env file then re-activate environment to ensure that the changes reflect.

To disable an openwisp service container and plug your own service like database, SMTP or nginx:

• You cannot disable the openwisp-dashboard container. It is the heart of OpenWISP and performs core functionalities.
• Disabling the openwisp-daphne & openwisp-websocket containers will cause some functions to fail.
• You can remove the openwisp-openvpn incase you do not want an OpenVPN server.
• To disable openwisp-topology set the SET_TOPOLOGY_TASKS variable to False. Then, remove any instance of openwisp-radius in the same docker network.
• To disable openwisp-radius set the SET_RADIUS_TASKS variable to False. Then, remove any instance of openwisp-topology in the same docker network.
• If you do not need openwisp-controller, remove any instance of openwisp-controller in the same docker network.
• Disabling openwisp-postgres:
  • Ensure your database instance reachable by the OpenWISP containers.
  • Ensure your database server supports GeoDjango.
  • Change the database configuration variables to point to your instances.
• Disabling openwisp-postfix:
  • Ensure your SMTP instance reachable by the OpenWISP containers.
  • Change the email configuration variables to point to your instances.
• Disabling openwisp-nginx:
  • Configurations in build/openwisp_nginx/ are helpful to replicate in your own instance.
• Disabling openwisp-freeradius:
  • Ensure your freeradius service is reachable on port 1812/udp and 1813/udp otherwise openwisp-radius services will fail to work properly.

Guide to build images again with modification or with different environment variables.

1. Install docker-compose.
2. In the root of the repository, run make develop, when the containers are ready, you can test them out by going to the domain name of the modules.

Now you'll need to do steps (2) everytime you make a changes and want to build the images again.

Note:

• Default username & password are admin.
• Default domains are: dashboard.openwisp.org, controller.openwisp.org, radius.openwisp.org and topology.openwisp.org.
• You may want to add the domains in your hosts file, command: echo "127.0.0.1 dashboard.openwisp.org controller.openwisp.org radius.openwisp.org topology.openwisp.org" >> /etc/hosts/

Right now, this is only tentative guide. Errata may exist. Please report errors on the gitter channel.

The Makefile has following options, that are useful for developers & users. Default action is compose-build.

• build-base: Build openwisp-base image. It is the base image used in other images. It takes the most time to build.
• compose-build: Build the openwisp images. This option must be used in most usecases, example when a user is building custom images.
• publish-build: Similar to compose-build except the produced can be used for manually testing before publishing official images and publishing the official images using the publish option.
• runtests: Run testcases to ensure all the services are working.
• develop-runtests: Similar to runtests, it runs the testcases except doesn't stop the containers after running the tests which maybe desired for debugging & analyzing failing container's logs.
• travis-runtests: Similar to runtests, it runs the testcases except used in travis builds because it doesn't clean up after running the tests and prints all the container's logs when an error occurs in the tests.
• clean: Purge everything produced during building the images.
• develop: Useful for development. Bundles all the commands required to build the images and run containers during development. With this option, you can interact with the interface and APIs and the logs will be printed on the terminal for debugging on the debugging level you select from the .env file.
• publish: Build, test and publish the latest Official images.