cp: error writing '/dev/fb0' : no space left on device about langstone HOT 5 CLOSED

Hello Manuel, I have just performed the installation with a fresh SD card, and all is still working correctly. So that would indicate that something must have failed during your installation. I would suggest you repeat the process and make sure you follow all of the steps in the Github instructions. /dev/fb0 is the frame buffer for the display, so if it is failing then it would point to something being wrong with the display installation. Are you using the official raspberry pi 7” display and only that display? Make sure you do not have an HDMI display connected as well. Colin G4EML From: EA7TB110 Sent: 28 June 2022 22:59 To: g4eml/Langstone Cc: Subscribed Subject: [g4eml/Langstone] cp: error writing '/dev/fb0' : no space left ondevice (Issue #47) Hello. I have made the installation on a Raspberry pi 4 with the 7" Touchscreen Display. The installation has been done correctly. But when the "run" script is executed, I get the error: "cp: error writing '/dev/fb0': No space left on device". Could you tell me how to solve the problem? Greetings. Manuel EA7TB — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

Hello Manuel, The warning is not important, but I don’t get it when I do the install so something is strange. If you are following the instructions exactly then you should get the same result. Are you using the recommended Buster Lite version? https://downloads.raspberrypi.org/raspios_lite_armhf/images/raspios_lite_armhf-2021-05-28/2021-05-07-raspios-buster-armhf-lite.zip Also it looks like the wiringPi package was not installed correctly. You could try running the commands from the install.sh script manually and checking for errors. cd /tmp wget https://project-downloads.drogon.net/wiringpi-latest.deb sudo dpkg -i wiringpi-latest.deb cd ~ Colin. From: EA7TB110 Sent: 29 June 2022 20:03 To: g4eml/Langstone Cc: g4eml; Comment Subject: Re: [g4eml/Langstone] cp: error writing '/dev/fb0' : no space left ondevice (Issue #47) Hi Colin. Thanks for your prompt response. I have made a new installation, and I have reviewed the messages that appear during the installation. When you run the LAgnstone installation, it gives the following error: ################################# Installing Langstone ################################# Cloning into 'Langstone'... remote: Enumerating objects: 1056, done. remote: Counting objects: 100% (361/361), done. remote: Compressing objects: 100% (50/50), done. remote: Total 1056 (delta 333), reused 320 (delta 311), pack-reused 695 Receiving objects: 100% (1056/1056), 543.13 KiB | 512.00 KiB/s, done. Resolving deltas: 100% (657/657), done. In file included from /home/pi/Langstone/LangstoneGUI.c:11: /home/pi/Langstone/Graphics.h: In function 'initScreen': /home/pi/Langstone/Graphics.h:295:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 295 | if ((int)fbp == -1) | ^ /usr/bin/ld: cannot find -lwiringPi collect2: error: ld returned 1 exit status /usr/bin/ld: cannot find -lwiringPi collect2: error: ld returned 1 exit status Could this be the fault? The screen is an original 7" touchscreen from raspberry. Regards Manuel EA7TB — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: ***@***.***>

Hi Manuel, That’s good news. 73 Colin. On 30 Jun 2022, at 14:32, EA7TB110 ***@***.***> wrote: Hi Colin I have started from scratch, new card and I have recorded the image with the Raspbian program "Raspberry Pi Imager", in a new SD card. Now if Langstone has been installed without any problem. Thanks for your help. Greetings Manuel EA7TB 73' — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.