sudo ./install.sh

wpa_cli_py -h
usage: wpa_cli_py.py [-h] ifname command [params [params ...]]

Send command directly to wpa_supplicant. Similar to wpa_cli, but command line
only.

positional arguments:
  ifname      Specify the interface that is being configured.
  command     Run a command. See wpa_cli manual for all the possible options.
  params      Command params. See wpa_cli manual for all the possible options.

optional arguments:
  -h, --help  show this help message and exit

wpa_cli_py_connect_to_network -h
usage: wpa_cli_py_connect_to_network.py [-h] ifname idNetwork

Force wpa_supplicant to connect to a specific network.

positional arguments:
  ifname      Specify the interface that is being used.
  idNetwork   Specify the network id to connect to.

optional arguments:
  -h, --help  show this help message and exit

wpa_cli_py_create_network -h
usage: wpa_cli_py_create_network.py [-h] [-s SSID] [-b BSSID] [-P PASSWORD]
                                    [-r PRIORITY] [-e]
                                    [-k {WPA-PSK,WPA-EAP,NONE,WPA-NONE,FT-PSK,FT-EAP,FT-EAP-SHA384,WPA-PSK-SHA256,WPA-EAP-SHA256,SAE,FT-SAE,WPA-EAP-SUITE-B,WPA-EAP-SUITE-B-192,OSEN,FILS-SHA256,FILS-SHA384,FT-FILS-SHA256,FT-FILS-SHA384,OWE,DPP}]
                                    [-I IDENTITY]
                                    [-E {PEAP,TLS,TTLS,PWD,SIM,AKA,AKA,FAST,LEAP}]
                                    ifname {OPEN,WEP,WPA,WPA2,EAP}

Set WIFI connection parameters using wpa_supplicant. For more information see:
https://w1.fi/cgit/hostap/plain/wpa_supplicant/wpa_supplicant.conf

positional arguments:
  ifname                Specify the interface that is being used.
  {OPEN,WEP,WPA,WPA2,EAP}
                        Specify the protocol used by the wifi network. Needed
                        to setup the required parameters.

optional arguments:
  -h, --help            show this help message and exit
  -s SSID, --ssid SSID  The SSID of the network.
  -b BSSID, --bssid BSSID
                        The BSSID of the network.
  -P PASSWORD, --password PASSWORD
                        The network password. Converted in the right
                        parameters needed by the network protocol.
  -r PRIORITY, --priority PRIORITY
                        The network priority.
  -e, --enabled         Enable the network.
  -k {WPA-PSK,WPA-EAP,NONE,WPA-NONE,FT-PSK,FT-EAP,FT-EAP-SHA384,WPA-PSK-SHA256,WPA-EAP-SHA256,SAE,FT-SAE,WPA-EAP-SUITE-B,WPA-EAP-SUITE-B-192,OSEN,FILS-SHA256,FILS-SHA384,FT-FILS-SHA256,FT-FILS-SHA384,OWE,DPP}, --keyMgmt {WPA-PSK,WPA-EAP,NONE,WPA-NONE,FT-PSK,FT-EAP,FT-EAP-SHA384,WPA-PSK-SHA256,WPA-EAP-SHA256,SAE,FT-SAE,WPA-EAP-SUITE-B,WPA-EAP-SUITE-B-192,OSEN,FILS-SHA256,FILS-SHA384,FT-FILS-SHA256,FT-FILS-SHA384,OWE,DPP}
                        EAP type for EAP connections. See: https://w1.fi/cgit/
                        hostap/plain/wpa_supplicant/wpa_supplicant.conf
  -I IDENTITY, --identity IDENTITY
                        Identity for EAP connections.
  -E {PEAP,TLS,TTLS,PWD,SIM,AKA,AKA,FAST,LEAP}, --eap {PEAP,TLS,TTLS,PWD,SIM,AKA,AKA,FAST,LEAP}
                        EAP type for EAP connections.See: https://w1.fi/cgit/h
                        ostap/plain/wpa_supplicant/wpa_supplicant.conf

wpa_cli_py_scan_results -h
usage: wpa_cli_py_scan_results.py [-h] ifname

Performs scan e scan_results commands and returns the WIFI networks found.

positional arguments:
  ifname      Specify the interface that is being used.

optional arguments:
  -h, --help  show this help message and exit

wpa_cli_py_wps_connect_to_network -h
usage: wpa_cli_py_wps_connect_to_network [-h] [-p PIN] [-b BSSID] ifname

Force wpa_supplicant to connect to a network using wps.

positional arguments:
  ifname                Specify the interface that is being used.

optional arguments:
  -h, --help            show this help message and exit
  -p PIN, --pin PIN     If present, the wps_pin connection will be use.
  -b BSSID, --bssid BSSID
                        The BSSID of the network. Specific for connections
                        using pin. The default value is any.