Client and server software to query DNS over HTTPS, using Google DNS-over-HTTPS protocol and IETF DNS-over-HTTPS (RFC 8484).

Tutorial to setup your own DNS-over-HTTPS (DoH) server. (Thanks to Antoine Aflalo)

Install Go, at least version 1.10.

(Note for Debian/Ubuntu users: You need to set $GOROOT if you could not get your new version of Go selected by the Makefile.)

First create an empty directory, used for $GOPATH:

mkdir ~/gopath
export GOPATH=~/gopath

To build the program, type:

make

To install DNS-over-HTTPS as Systemd services, type:

sudo make install

By default, Google DNS over HTTPS is used. It should work for most users (except for People's Republic of China). If you need to modify the default settings, type:

sudoedit /etc/dns-over-https/doh-client.conf

To automatically start DNS-over-HTTPS client as a system service, type:

sudo systemctl start doh-client.service
sudo systemctl enable doh-client.service

Then, modify your DNS settings (usually with NetworkManager) to 127.0.0.1.

To test your configuration, type:

dig www.google.com

If it is OK, you will wee:

;; SERVER: 127.0.0.1#53(127.0.0.1)

To uninstall, type:

sudo make uninstall

The configuration files are kept at /etc/dns-over-https. Remove them manually if you want.

The following is a typical DNS-over-HTTPS architecture:

+--------------+                                +------------------------+
| Application  |                                |  Recursive DNS Server  |
+-------+------+                                +-----------+------------+
        |                                                   |
+-------+------+                                +-----------+------------+
| Client side  |                                |      doh-server        |
| cache (nscd) |                                +-----------+------------+
+-------+------+                                            |
        |         +--------------------------+  +-----------+------------+
+-------+------+  |    HTTP cache server /   |  |   HTTP service muxer   |
|  doh-client  +--+ Content Delivery Network +--+ (Apache, Nginx, Caddy) |
+--------------+  +--------------------------+  +------------------------+

Although DNS-over-HTTPS can work alone, a HTTP service muxer would be useful as you can host DNS-over-HTTPS along with other HTTPS services.

HTTP/2 with at least TLS v1.3 is recommended. OCSP stapling must be enabled, otherwise DNS recursion may happen.

DNS-over-HTTPS is compatible with DNSSEC, and requests DNSSEC signatures by default. However signature validation is not built-in. It is highly recommended that you install unbound or bind and pass results for them to validate DNS records.

DNS-over-HTTPS supports EDNS0-Client-Subnet protocol, which submits part of the client's IP address (/24 for IPv4, /56 for IPv6 by default) to the upstream server. This is useful for GeoDNS and CDNs to work, and is exactly the same configuration as most public DNS servers.

Keep in mind that /24 is not enough to track a single user, although it is precise enough to know the city where the user is located. If you think EDNS0-Client-Subnet is affecting your privacy, you can set no_ecs = true in /etc/dns-over-https/doh-client.conf, with the cost of slower video streaming or software downloading speed.

To ultilize ECS, X-Forwarded-For or X-Real-IP should be enabled on your HTTP service muxer. If your server is backed by unbound or bind, you probably want to configure it to enable the EDNS0-Client-Subnet feature as well.

DNS-over-HTTPS uses a protocol compatible to Google DNS-over-HTTPS, except for absolute expire time is preferred to relative TTL value. Refer to json-dns/response.go for a complete description of the API.

DNS-over-HTTPS uses a protocol compatible to IETF DNS-over-HTTPS (RFC 8484).

Currently supported features are:

• IPv4 / IPv6
• EDNS0 large UDP packet (4 KiB by default)
• EDNS0-Client-Subnet (/24 for IPv4, /56 for IPv6 by default)

This project is named "DNS-over-HTTPS" because it was written before the IETF DoH project. Although this project is compatible with IETF DoH, the project is not affiliated with IETF.

To avoid confusion, you may also call this project "m13253/DNS-over-HTTPS" or anything you like.

DNS-over-HTTPS is licensed under the MIT License. You are encouraged to embed DNS-over-HTTPS into your other projects, as long as the license permits.

You are also encouraged to disclose your improvements to the public, so that others may benefit from your modification, in the same way you receive benefits from this project.