Monitoring for Bungo Brew Co FVs and CO2 emissions

Set up AWS as per: https://realpython.com/python-boto3-aws-s3/

Create a user with sufficient S3 rights in AWS IAM and take note of private and public keys Install boto3 and set up your credentials and default region.

Wire your DSB18B20 Temp sensor as per https://medium.com/initial-state/how-to-build-a-raspberry-pi-temperature-monitor-8c2f70acaea9 under the DSB18B20 Solution section

sudo nano /boot/config.txt

If the following line is not already in this file (if it is, it is likely at the bottom of the file), add it and save the file.

dtoverlay=w1-gpio,gpiopin=4

Restart your Pi for the changes to take effect.

sudo reboot

Wire your 811 sensor (VOC and Co2) as per https://www.makerblog.info/cjmcu-811-with-raspberry-pi.html I'm using a CJMCU-811

Grabbed this guy's great code to make it work: https://gist.github.com/xxlukas42/60ae08f75e68a0cfcdb7c9dd60145d34

Added BMP280 following these instructions (temp and barometric pressure): https://learn.adafruit.com/adafruit-bmp280-barometric-pressure-plus-temperature-sensor-breakout/circuitpython-test

CORS setup if needing to host html file outside bucket:

[
    {
        "AllowedHeaders": [],
        "AllowedMethods": [
            "GET"
        ],
        "AllowedOrigins": [
            "*"
        ],
        "ExposeHeaders": []
    }
]