flatmax / buildroot.rk3399.external Goto Github PK
View Code? Open in Web Editor NEWAn external buildroot tree for the NanoPi Neo4 hardware.
An external buildroot tree for the NanoPi Neo4 hardware.
The last line of setup.sh fails with '3409834 command not found'.
Looks like it's not finished.
Which script I need to edit ?
Hi,
I followed readme to build image and fused it to sd card. Plug serial console and observe this:
[ 3.004474] Bluetooth: HCI UART protocol BCM registered
[ 3.009772] usbcore: registered new interface driver bfusb
[ 3.015309] usbcore: registered new interface driver btusb
[ 3.021245] cpu cpu0: bin=1
[ 3.024097] cpu cpu0: leakage=17
[ 3.024338] fusb302 4-0022: CC connected in CC1 as UFP
[ 3.033403] cpu cpu0: Failed to get pvtm
[ 3.037412] cpu cpu0: bin-scale=34
[ 3.041083] cpu cpu4: bin=1
[ 3.043935] cpu cpu4: leakage=28
[ 3.047809] cpu cpu4: Failed to get pvtm
[ 3.051789] cpu cpu4: bin-scale=17
[ 3.056164] cpu cpu0: avs=0
[ 3.059061] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
8P����x�"�N���Z���R�8��껽�����˺�u:���Ҋ�B8�B���������JҸ�B����2�|�<�ʴ�"�+������ژ��[��
�=�H���*�9/���3q#y/�{1xF�ϯ95=�=����
s�����*�[��ڋ������:}�a��E봊�=o�1ꣾ9����
U-Boot 2014.10-RK3399-06 (Mar 24 2020 - 09:35:07)
CPU: rk3399
board cannot boot and gets rebooted. I used power supply from my laptop (130W) so it shouldn't be a problem. Ideas? Thanks.
I get a build failure with upower-0.99.4
>>> upower 0.99.4 Fixing libtool files
upower: installs files in /home/user/build/neo/buildroot.neo4/output/host/aarch64-buildroot-linux-gnu/sysroot//home/user/build/neo/buildroot.neo4/output
package/pkg-generic.mk:270: recipe for target '/home/user/build/neo/buildroot.neo4/output/build/upower-0.99.4/.stamp_staging_installed' failed
make: *** [/home/user/build/neo/buildroot.neo4/output/build/upower-0.99.4/.stamp_staging_installed] Error 1
If any qt5 packages don't download, then set a better qt5 url.
buildroot.neo4$ git diff
diff --git a/package/qt5/qt5.mk b/package/qt5/qt5.mk
index 88ba1958dd..d9bde01bba 100644
--- a/package/qt5/qt5.mk
+++ b/package/qt5/qt5.mk
@@ -13,7 +13,8 @@ QT5_VERSION_MAJOR = 5.6
QT5_VERSION = $(QT5_VERSION_MAJOR).3
QT5_SOURCE_TARBALL_PREFIX = opensource-src
endif
-QT5_SITE = https://download.qt.io/official_releases/qt/$(QT5_VERSION_MAJOR)/$(QT5_VERSION)/submodules
+#QT5_SITE = https://download.qt.io/official_releases/qt/$(QT5_VERSION_MAJOR)/$(QT5_VERSION)/submodules
+QT5_SITE = https://download.qt.io/archive/qt/$(QT5_VERSION_MAJOR)/$(QT5_VERSION)/submodules
include $(sort $(wildcard package/qt5/*/*.mk))
I am having trouble starting weston, I get the following errors - any help would be hugely appreciated :
# weston --tty 2
Date: 2018-12-07 UTC
[05:45:15.046] weston 3.0.0
http://wayland.freedesktop.org
Bug reports to: https://bugs.freedesktop.org/enter_bug.cgi?product=Wayland&component=weston&version=3.0.0
Build: unknown (not built from git or tarball)
[05:45:15.046] Command line: weston --tty 2
[05:45:15.047] OS: Linux, 4.4.143, #1 SMP Fri Dec 7 16:02:19 AEDT 2018, aarch64
[05:45:15.047] Starting with no config file.
[05:45:15.052] Output repaint window is 15 ms maximum.
[05:45:15.055] Loading module '/usr/lib/libweston-3/drm-backend.so'
[05:45:15.075] initializing drm backend
[05:45:15.088] using /dev/dri/card0
[05:45:15.095] Loading module '/usr/lib/libweston-3/gl-renderer.so'
gbm: failed to open any driver (search paths /usr/lib/dri)
gbm: Last dlopen error: /usr/lib/dri/rockchip_dri.so: cannot open shared object file: No such file or directory
failed to load driver: rockchip
[05:45:15.258] EGL client extensions: EGL_EXT_client_extensions
EGL_EXT_platform_base EGL_KHR_client_get_all_proc_addresses
EGL_KHR_debug EGL_EXT_platform_wayland
[05:45:15.261] failed to initialize egl
[05:45:15.342] fatal: failed to create compositor backend
I finally received my board but only see the FriendlyElec uboot logo then no more video output
Have attached serial console and see
[ 10.660791] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
Hi, I am running into an error after trying to run this on the Tinker Board 2S. I run with all the default settings as stated in the README.md as I'm not sure what to change in the config in make menuconfig.
Let me know if you know what I should do.
This is what I get with a UART to USB connected to the UART debug port on the Tinker Board 2S.
Welcome to minicom 2.7.1
DDR Version 1.24 20191016
In
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 MHz, current 856MHz
OUT
Boot1 Release Time: Dec 24 2019 18:00:26, version: 1.24
CPUId = 0x0
ChipType = 0x10, 635
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30168MB
FwPartOffset=2000 , 0
StorageInit ok = 163442
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part: 0, name: APP, start:0x7000, size:0x2710000
GPT part: 1, name: TBC, start:0x800, size:0x100
GPT part: 2, name: RP1, start:0x1000, size:0x380
GPT part: 3, name: EBT, start:0x1800, size:0x480
GPT part: 4, name: WB0, start:0x2000, size:0x80
GPT part: 5, name: BPF, start:0x2800, size:0x180
GPT part: 6, name: BPF-DTB, start:0x3000, size:0x300
GPT part: 7, name: FX, start:0x3800, size:0x80
GPT part: 8, name: TOS, start:0x4000, size:0x380
GPT part: 9, name: DTB, start:0x4800, size:0x380
GPT part: 10, name: LNX, start:0x5000, size:0x600
GPT part: 11, name: EKS, start:0x5800, size:0x80
GPT part: 12, name: BMP, start:0x6000, size:0xa0
GPT part: 13, name: RP4, start:0x6800, size:0x100
no find partition:uboot.
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xba378
RunBL31 0x40000 @ 375094 us
NOTICE: BL31: v1.3(release):51fa197
NOTICE: BL31: Built : 14:53:31, Mar 13 2020
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in E3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1191): pd status 3e
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE inK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.