stl2ngc converts an STL file to LinuxCNC compatible G-Code.
First, install OpenCAMLib, see: https://github.com/aewallin/opencamlib
git clone https://github.com/aewallin/opencamlib && cd opencamlib
mkdir build && cd build && cmake ../src && make -j4
sudo make install
Next, checkout stl2ngc from git and run make and sudo make install:
git clone https://github.com/koppi/stl2ngc && cd stl2ngc
make
sudo make install
To convert file.stl
to file.ngc
run:
cat file.stl | stl2ngc > file.ngc
See Wiki.
-
This is an early release, expect errors and missing features.
Please fork the repo.
-
No Gui? - Yes, only command-line for now.
- Jakob Flierl