Open Management Infrastructure (OMI) is an open source project to further the development of a production quality implementation of the DMTF CIM/WBEM standards. The OMI CIMOM is also designed to be portable and highly modular. In order to attain its small footprint, it is coded in C, which also makes it a much more viable CIM Object Manager for embedded systems and other infrastructure components that have memory constraints for their management processor. OMI is also designed to be inherently portable. It builds and runs today on most UNIX® systems and Linux. In addition to OMI's small footprint, it also demonstrates very high performance.
RPM and DEB packages are provided for the installation of OMI on most enterprise Linux distributions. To install OMI, download the correct package for your Linux computer. Choose from:
- 32-bit (x86) or 64-bit (x64) architecture
- OpenSSL version 1.0.x or 1.1.x (to determine your OpenSSL version, run:
openssl version
) - RPM or Debian package format
You can download and install OMI from the Releases page. While version numbers change from release to release, the following downloads illustrates the package types for OMI:
Platform | Release | Architecture | SSL | Filename |
---|---|---|---|---|
Linux | Debian | x64 | 1.1.0 | omi-MAJOR.MINOR.PATCH-BUILD.ssl_110.ulinux.x64.deb |
Linux | Debian | x64 | 1.0.0 | omi-MAJOR.MINOR.PATCH-BUILD.ssl_100.ulinux.x64.deb |
Linux | RPM | x64 | 1.1.0 | omi-MAJOR.MINOR.PATCH-BUILD.ssl_110.ulinux.x64.rpm |
Linux | RPM | x64 | 1.0.0 | omi-MAJOR.MINOR.PATCH-BUILD.ssl_100.ulinux.x64.rpm |
Linux | Debian | x86 | 1.0.0 | omi-MAJOR.MINOR.PATCH-BUILD.ssl_100.ulinux.x86.deb |
Linux | RPM | x86 | 1.0.0 | omi-MAJOR.MINOR.PATCH-BUILD.ssl_100.ulinux.x86.rpm |
Note: MAJOR, MINOR, PATCH, and BUILD refer to the version number information for the specific version of OMI that you wish to install.
Alternatively, you can now also download from Microsoft Repo. Instructions
on setting this up can be found here. Follow the instructions for your platform. You can then use your platform's package tool to install OMI (i.e. sudo apt-get install omi
or sudo yum install omi
).
The latest version of all supported platform packages can also be found here, but where possible we recommend downloading from the Microsoft Repo.
We support most modern Linux platforms (and some that aren't so modern). That said, our formal tested matrix of Linux platforms includes the following:
- CentOS 6 and 7 (x86 and x64)
- CentOS 8 x64 (omi>=1.6.5-0)
- Debian 8 (x86 and x64) and Debian 9 x64
- Debian 10 x64 (omi>=1.6.8-0)
- Oracle Linux 5, 6, and 7 (x86 and x64)
- Oracle Linux 8 x64 (omi>=1.6.8-0)
- Red Hat Enterprise Linux Server 5 and 6, and 7 (x86 and x64)
- Note: Red Hat 7.1 or later also runs on the PPC platform
- Red Hat Enterprise Linux Server 8 x64 (omi>=1.6.4-0)
- SUSE Linux Enterprise Server 11, 12 (x86 and x64), 12 ppc and 15.
- Ubuntu 14.04 LTS, 16.04 LTS and 18.04 LTS (x86 and x64)
- Ubuntu 20.04 LTS x64 (omi>=1.6.8-0)
As well as the Linux platforms supported, OMI is also tested to work on the following platforms:
- AIX 7.1 and 7.2
- HPUX 11.31 (ia64 only)
- Solaris 10 and 11 (Sparc and x86)
- For RPM based systems (RedHat, Oracle, CentOS, SuSE):
sudo rpm -Uvh ./omi-1.3.0-2.ssl_100.ulinux.x64.rpm
- For DPKG based systems (Debian, Ubuntu, etc.):
sudo dpkg -i ./omi-1.3.0-2.ssl_100.ulinux.x64.deb
Note: 1.3.0-2 is just an example, you should use the latest release version of OMI.
To download the source code to OMI for build purposes or to further develop OMI, please see repository Build-omi.
- Setup of credentials for NTLM authentication is covered in setup-ntlm-omi (omi version >= v1.2.0-35)
- Setup of credentials for Kerberos authentication is covered in setup-kerberos-omi (omi version >= v1.4.0-6)
Installing OMI configures a daemon named "omid" which can be
controlled with standard service controllers: service
or
systemctl
. Additionally, a service control script can be found at:
/opt/omi/bin/service_control
Restarting OMI: sudo /opt/omi/bin/service_control restart
To test that OMI is functional locally, the omicli
command be used:
sudo /opt/omi/bin/omicli ei root/omi OMI_Identify
This command enumerates all instances of the OMI_Identify
class in the root/omi
namespace.
OMI's server configuration is set in the file:
/etc/opt/omi/conf/omiserver.conf
. Important configuration
properties include:
Property | Purpose |
---|---|
httpsport | The HTTPs port(s) to listen on. The default is 5986. Multiple ports can be defined as a comma-separated list |
httpport | The HTTP port to listen on. It is recommended that HTTP remain disabled (httpport=0) to prevent unencrypted communication |
loglevel | The logging option for MI server. Valid options are: ERROR, WARNING, INFO, DEBUG, VERBOSE (debug build), default value is: WARNING |
agentDebugging | When true , each provider runs in its own omiagent process; when false , all providers run in same omiagent process, default value is: false . (omi version >= v1.4.3-1) |
AuthorizedGroups | Setting for authorized user groups, for example: AuthorizedGroups=SCX\scx local admins, SCX\domain users, omi_allowed_group ; its format is separated by commas, please check Allow Deny Handling for more detail. (omi version >= v1.4.3-1) |
UnauthorizedGroups | Setting for unauthorized user groups, for example: UnauthorizedGroups=SCX\denied domain users, omi_denied_group ; its format is separated by commas, please check Allow Deny Handling for more detail. (omi version >= v1.4.3-1) |
pemfile | The certificate to use for TLS/SSL communication |
keyfile | The private key that corresponds to the TLS/SSL certificate |
NoSSLv2 | When true , the SSLv2 protocol is disabled |
NoSSLv3 | When true , the SSLv3 protocol is disabled. If NoSSLv2 and NoSSLv3 are both set to true , only TLS encryption will be negotiated |
NoTLSv1_0 | When true , the TLSv1.0 protocol is disabled |
NoTLSv1_1 | When true , and if available on the platform, the TLSv1.1 protocol is disabled |
NoTLSv1_2 | When true , and if available on the platform, the TLSv1.2 protocol is disabled |
sslciphersuite | The prioritized list of allowed SSL/TLS ciphers. For example, set sslciphersuite=ALL:!SSLv2:!SSLv3:!TLSv1:!RC4-MD5:!RC4-SHA:!SEED-SHA in /etc/opt/omi/conf/omiserver.conf to disable all SSLv2,SSLv3,TLSv1 ciphers and 3 weak ciphers: RC4-MD5,RC4-SHA,SEED-SHA; then run sudo /opt/omi/bin/service_control restart to take effect, for more information, check man ciphers or search internet with openssl man ciphers |
Similar to configuring the server, the client configuration file is located at /etc/opt/omi/conf/omicli.conf
.
The log rotate configuration for omi can be found at: /etc/logrotate.d/omi
(omi version >= 1.6.0)
The default settings are
# omi logs rotate configuration settings
/var/opt/omi/log/*.log /var/opt/omi/log/*.trc {
# keep 5 worth of backlogs
rotate 5
# If the log file is missing, go on to the next one
# without issuing an error message.
missingok
# Do not rotate the log if it is empty,
# this overrides the ifempty option.
notifempty
# Old versions of log files are compressed with gzip by default.
compress
# Log files are rotated only if they grow bigger then 100M.
size 100M
# Truncate the original log file in place after creating a copy,
# instead of moving the old log file and optionally creating a new one.
copytruncate
}
Note:
- To make log rotate every 15 minutes, we install a cron job at:
/etc/cron.d/omilogrotate
(omi version >= 1.6.0) The default setting is*/15 * * * * root /usr/sbin/logrotate /etc/logrotate.d/omi >/dev/null 2>&1
. - If selinux is enabled on Linux machine, omi will install a selinux module called 'omi-logrotate' to make omi log rotate work fine on Linux platforms and Red Hat 7.1 PPC.
- Supported platforms for selinux log rotate: Supported Linux Operating Systems
- If cron or crond doesn't install on the machine, omi will not install omi log rotate cron job for omi logs to be rotated.
- If you don't want omi cron to rotate omi logs, you can just remove it:
sudo rm -f /etc/cron.d/omilogrotate
. - If you want omi cron to rotate omi logs, but cron or crond doesn't start, then you can start it:
sudo service cron start
,sudo service crond start
orsudo systemctl enable cron;sudo systemctl start cron
. - If you want omi cron to rotate omi logs, but cron or crond doesn't install, then you can install it:
sudo apt-get install -y cron
,sudo yum install -y crond
,sudo yum install -y cronie
orsudo zypper in cron -y
.
/opt/omi/bin/omicli ei root/omi OMI_Identify --auth Basic --hostname yourlinuxhostname -u root -p rootpwd --port 5985
/opt/omi/bin/omicli ei root/cimv2 Win32_Environment --auth Basic --hostname yourwinmachine -u administrator -p adminpassword --port 5985
winrm enumerate http://schemas.microsoft.com/wbem/wscim/1/cim-schema/2/OMI_Identify?__cimnamespace=root/omi -r:http://yourlinuxhostname:5985 -auth:Basic -u:root -p:"rootpassword" -skipcncheck -skipcacheck -encoding:utf-8 -unencrypted
Note: If your root password contains escaped character like 'rootpa^ssword', you need to use double quotes like -p:"rootpa^ssword" for winrm on Windows. These escaped characters need to use double quotes after '-p:' :
%^&<>|'`,;=()!"\[].*?
OMI Provider examples:
Provider Name | Official Site |
---|---|
PowerShell Desired State Configuration - for Linux | DSC |
System Center Cross Platform Provider for Operations Manager | SCXcore |
PowerShell Remoting Protocol | PSRP |
Docker Monitoring Agent for OMI Server | Docker Provider |
MySQL Monitoring Agent for OMI Server | MySQL Provider |
Apache Monitoring Agent for OMI Server | Apache Provider |
Python Script Provider for OMI Server | Python Provider |
This project has adopted the Microsoft Open Source Code of Conduct. For more information see the Code of Conduct FAQ or contact [email protected] with any additional questions or comments.