vibl: a driverless keyboard bootloader that integrates with Vial GUI.

Currently, implementations are available for:

• STM32F103 (based on bootsector/stm32-hid-bootloader)

1. Add a new line in CMakeLists.txt for your keyboard, e.g. add_bootloader(mykeyboard)

2. Add a new option in the bootloader/src/config.h configuration file for your keyboard before the final "else" statement:

#elif defined(TARGET_MYKEYBOARD)
/*
  This should match the UID you have configured in the Vial firmware
  See Vial porting docs for more info: https://vial-kb.github.io/gettingStarted/porting-to-vial.html
*/
#define VIAL_KEYBOARD_UID {0xXX, 0xXX, 0xXX, 0xXX, 0xXX, 0xXX, 0xXX, 0xXX}
/*
  These configure an emergency key held to trigger bootloader entry on boot.
  See https://github.com/xyzz/stm32f103-keyboard-bootloader#adding-a-new-keyboard for an explanation.
*/
#define BL_OUTPUT_BANK GPIOB
#define BL_OUTPUT_PIN 12
#define BL_INPUT_BANK GPIOB
#define BL_INPUT_PIN 13

3. Compile the bootloader

cd bootloader
mkdir build && cd build
cmake ..
make

This should produce a bootloader-mykeyboard.bin file.

4. Flash and write-protect the bootloader

In order to program option bytes, you should use a fork of stlink. Once you compile it, flash the bootloader with:

st-flash opterase
st-flash write ../../misc/opt-head.bin 0x1FFFF800
st-flash write bootloader-mykeyboard.bin 0x8000000
st-flash write ../../misc/opt-tail.bin 0x1FFFF802
st-flash --area=option read

You should confirm that the final command produces the following output:

A5 5A FF 00 FF 00 FF 00 FE 01 FF 00 FF 00 FF 00

FE 01 indicates that the first block of 0x1000 bytes is write-protected.

Power-cycle the device and confirm it boots into the bootloader:

[1737747.221873] usb 1-5.2: new full-speed USB device number 8 using xhci_hcd
[1737747.468303] usb 1-5.2: New USB device found, idVendor=1234, idProduct=5678, bcdDevice= 0.01
[1737747.468306] usb 1-5.2: New USB device strings: Mfr=1, Product=1, SerialNumber=2
[1737747.468307] usb 1-5.2: Product: vibl-HIDUSB
[1737747.468308] usb 1-5.2: Manufacturer: vibl-HIDUSB
[1737747.468309] usb 1-5.2: SerialNumber: vibl:d4f8159c

1. In your keyboard rules.mk, enable the vibl bootloader^(example):

MCU = STM32F103
BOOTLOADER = vibl

2. In your vial.json file, enable the vibl feature^(example):

  "vial": {
    "vibl": true
  }

3. Compile your keyboard firmware as usual with make mykeyboard:via; now the build process will produce a .vfw file in addition to the .bin:

Compiling: quantum/via.c                                                                            [OK]
Compiling: tmk_core/common/command.c                                                                [OK]
Linking: .build/vial_test_via.elf                                                                   [OK]
Creating binary load file for flashing: .build/vial_test_via.bin                                    [OK]
--------------------------------------------------------------------------------
Vial update package created at vial_test_via.vfw
--------------------------------------------------------------------------------
Creating load file for flashing: .build/vial_test_via.hex                                           [OK]

Size after:
   text	   data	    bss	    dec	    hex	filename
      0	  30934	      0	  30934	   78d6	.build/vial_test_via.hex

Copying vial_test_via.bin to qmk_firmware folder                                                    [OK]
(Firmware size check does not yet support cortex-m3 microprocessors; skipping.)

At that point you should be able to open Vial GUI, have the bootloader auto-detected and flash your firmware package. Further, after flashing such firmware for the first time, the update process can also be performed without having to manually restart in bootloader mode.

Firmware updater when keyboard is in bootloader mode

Firmware updater when keyboard is running vial-qmk firmware