Quick Start

Installation

Build the gitlab image.

git clone https://github.com/jasonbrooks/docker-gitlab.git
cd docker-gitlab
docker build --tag="$USER/gitlab" .

Build a postgresql image.

git clone https://github.com/CentOS/CentOS-Dockerfiles.git
docker build --tag="$USER/postgres" CentOS-Dockerfiles/postgres/centos7/.

Build a redis image.

git clone https://github.com/CentOS/CentOS-Dockerfiles.git
docker build --tag="$USER/redis" CentOS-Dockerfiles/redis/centos7/.

Startup

Start the redis container

docker run --name=redis -d $USER/redis

Start the postgres container

docker run --name postgresql -d \
-e 'DB_USER=gitlab' \
-e 'DB_PASS=password' \
-e 'DB_NAME=gitlab_production' \
$USER/postgres

Start the gitlab container

docker run --name=gitlab -d \
--link redis:redisio \
--link postgresql:postgresql \
$USER/gitlab

Monitor the setup process with docker logs -f gitlab. When supervisor reports that unicorn, nginx, cron, sshd and sidekiq are RUNNING, find the IP address of your gitlab container with docker inspect gitlab | grep IP, point your browser at this IP, and log in using the default username and password:

username: root
password: 5iveL!fe

You should now have the GitLab application up and ready for testing. If you want to use this image in production, then please read on.

Hardware Requirements

CPU

1 core works for under 100 users but the responsiveness might suffer
2 cores is the recommended number of cores and supports up to 100 users
4 cores supports up to 1,000 users
8 cores supports up to 10,000 users

Memory

512MB is too little memory, GitLab will be very slow and you will need 250MB of swap
768MB is the minimal memory size but we advise against this
1GB supports up to 100 users (with individual repositories under 250MB, otherwise git memory usage necessitates using swap space)
2GB is the recommended memory size and supports up to 1,000 users
4GB supports up to 10,000 users

Storage

The necessary hard drive space largely depends on the size of the repos you want to store in GitLab. But as a rule of thumb you should have at least twice as much free space as your all repos combined take up. You need twice the storage because GitLab satellites contain an extra copy of each repo.

If you want to be flexible about growing your hard drive space in the future consider mounting it using LVM so you can add more hard drives when you need them.

Apart from a local hard drive you can also mount a volume that supports the network file system (NFS) protocol. This volume might be located on a file server, a network attached storage (NAS) device, a storage area network (SAN) or on an Amazon Web Services (AWS) Elastic Block Store (EBS) volume.

If you have enough RAM memory and a recent CPU the speed of GitLab is mainly limited by hard drive seek times. Having a fast drive (7200 RPM and up) or a solid state drive (SSD) will improve the responsiveness of GitLab.

Supported Web Browsers

Chrome (Latest stable version)
Firefox (Latest released version)
Safari 7+ (Know problem: required fields in html5 do not work)
Opera (Latest released version)
IE 10+

Mail

The mail configuration should be specified using environment variables while starting the GitLab image. The configuration defaults to using gmail to send emails and requires the specification of a valid username and password to login to the gmail servers.

The following environment variables need to be specified to get mail support to work.

SMTP_DOMAIN (defaults to www.gmail.com)
SMTP_HOST (defaults to smtp.gmail.com)
SMTP_PORT (defaults to 587)
SMTP_USER
SMTP_PASS
SMTP_STARTTLS (defaults to true)
SMTP_AUTHENTICATION (defaults to 'login' if SMTP_USER is set)

docker run --name=gitlab -d \
  -e '[email protected]' -e 'SMTP_PASS=PASSWORD' \
  -v /opt/gitlab/data:/home/git/data \
  $USER/gitlab

SSL

Access to the gitlab application can be secured using SSL so as to prevent unauthorized access to the data in your repositories. While a CA certified SSL certificate allows for verification of trust via the CA, a self signed certificates can also provide an equal level of trust verification as long as each client takes some additional steps to verify the identity of your website. I will provide instructions on achieving this towards the end of this section.

To secure your application via SSL you basically need two things:

Private key (.key)
SSL certificate (.crt)

When using CA certified certificates, these files are provided to you by the CA. When using self-signed certificates you need to generate these files yourself. Skip the following section if you are armed with CA certified SSL certificates.

Jump to the Strengthening the server security section if you are using a load balancer such as hipache, haproxy or nginx.

Generation of Self Signed Certificates

Generation of self-signed SSL certificates involves a simple 3 step procedure.

STEP 1: Create the server private key

openssl genrsa -out gitlab.key 2048

STEP 2: Create the certificate signing request (CSR)

openssl req -new -key gitlab.key -out gitlab.csr

STEP 3: Sign the certificate using the private key and CSR

openssl x509 -req -days 365 -in gitlab.csr -signkey gitlab.key -out gitlab.crt

Congratulations! you have now generated an SSL certificate thats valid for 365 days.

Strengthening the server security

This section provides you with instructions to strengthen your server security. To achieve this we need to generate stronger DHE parameters.

openssl dhparam -out dhparam.pem 2048

Installation of the SSL Certificates

Out of the four files generated above, we need to install the gitlab.key, gitlab.crt and dhparam.pem files at the gitlab server. The CSR file is not needed, but do make sure you safely backup the file (in case you ever need it again).

The default path that the gitlab application is configured to look for the SSL certificates is at /home/git/data/certs, this can however be changed using the SSL_KEY_PATH, SSL_CERTIFICATE_PATH and SSL_DHPARAM_PATH configuration options.

If you remember from above, the /home/git/data path is the path of the data store, which means that we have to create a folder named certs inside /opt/gitlab/data/ and copy the files into it and as a measure of security we will update the permission on the gitlab.key file to only be readable by the owner.

mkdir -p /opt/gitlab/data/certs
cp gitlab.key /opt/gitlab/data/certs/
cp gitlab.crt /opt/gitlab/data/certs/
cp dhparam.pem /opt/gitlab/data/certs/
chmod 400 /opt/gitlab/data/certs/gitlab.key

Great! we are now just a step away from having our application secured.

Enabling HTTPS support

HTTPS support can be enabled by setting the GITLAB_HTTPS option to true. Additionally, when using self-signed SSL certificates you need to the set SSL_SELF_SIGNED option to true as well. Assuming we are using self-signed certificates

docker run --name=gitlab -d \
  -e 'GITLAB_HTTPS=true' -e 'SSL_SELF_SIGNED=true' \
  -v /opt/gitlab/data:/home/git/data \
  $USER/gitlab

In this configuration, any requests made over the plain http protocol will automatically be redirected to use the https protocol. However, this is not optimal when using a load balancer.

Using HTTPS with a load balancer

Load balancers like haproxy/hipache talk to backend applications over plain http and as such, installation of ssl keys and certificates in the container are not required when using a load balancer.

When using a load balancer, you should set the GITLAB_HTTPS_ONLY option to false with the GITLAB_HTTPS options set to true and the SSL_SELF_SIGNED option to the appropriate value. With this in place, you should also configure the load balancer to support handling of https requests. But that is out of the scope of this document. Please refer to Using SSL/HTTPS with HAProxy for information on the subject.

Note that when the GITLAB_HTTPS_ONLY is disabled, the application does not perform the automatic http to https redirection and this functionality has to be configured at the load balancer which is also described in the link above. Unfortunately hipache does not come with an option to perform http to https redirection, so the only choice you really have is to switch to using haproxy or nginx for load balancing.

In summation, the docker command would look something like this:

docker run --name=gitlab -d \
  -e 'GITLAB_HTTPS=true' -e 'SSL_SELF_SIGNED=true' \
  -e 'GITLAB_HTTPS_ONLY=false' \
  -v /opt/gitlab/data:/home/git/data \
  $USER/gitlab

Again, drop the -e 'SSL_SELF_SIGNED=true' option if you are using CA certified SSL certificates.

Establishing trust with your server

This section deals will self-signed ssl certificates. If you are using CA certified certificates, your done.

This section is more of a client side configuration so as to add a level of confidence at the client to be 100 percent sure they are communicating with whom they think they.

This is simply done by adding the servers certificate into their list of trusted ceritficates. On ubuntu, this is done by copying the gitlab.crt file to /usr/local/share/ca-certificates/ and executing update-ca-certificates.

Again, this is a client side configuration which means that everyone who is going to communicate with the server should perform this configuration on their machine. In short, distribute the gitlab.crt file among your developers and ask them to add it to their list of trusted ssl certificates. Failure to do so will result in errors that look like this:

git clone https://git.local.host/gitlab-ce.git
fatal: unable to access 'https://git.local.host/gitlab-ce.git': server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none

You can do the same at the web browser. Instructions for installing the root certificate for firefox can be found here. You will find similar options chrome, just make sure you install the certificate under the authorities tab of the certificate manager dialog.

There you have it, thats all there is to it.

Installing Trusted SSL Server Certificates

If your GitLab CI server is using self-signed SSL certificates then you should make sure the GitLab CI server certificate is trusted on the GitLab server for them to be able to talk to each other.

The default path image is configured to look for the trusted SSL certificates is at /home/git/data/certs/ca.crt, this can however be changed using the CA_CERTIFICATES_PATH configuration option.

Copy the ca.crt file into the certs directory on the datastore. The ca.crt file should contain the root certificates of all the servers you want to trust. With respect to GitLab CI, this will be the contents of the gitlab_ci.crt file as described in the README of the docker-gitlab-ci container.

By default, our own server certificate gitlab.crt is added to the trusted certificates list.

Run under sub URI

If you like to serve the GitLab under sub URI like http://localhost/gitlab, set GITLAB_RELATIVE_URL_ROOT=/gitlab or anything you like. The path should start with slash, and should not have any trailing slashes.

docker run --name=gitlab -d \
  -v /opt/gitlab/data:/home/git/data \
  -e 'GITLAB_RELATIVE_URL_ROOT=/gitlab' \
  $USER/gitlab

When you change the sub URI path, you need to recompile all precompiled assets. This can be done with either deleting tmp/cache/VERSION file under data store, or just rm -Rf /PATH/TO/DATA_STORE/tmp. After cleaning up cache files, restart the container.

OmniAuth Integration

GitLab leverages OmniAuth to allow users to sign in using Twitter, GitHub, and other popular services. Configuring OmniAuth does not prevent standard GitLab authentication or LDAP (if configured) from continuing to work. Users can choose to sign in using any of the configured mechanisms.

Refer to the GitLab documentation for additional information.

Google

To enable the Google OAuth2 OmniAuth provider you must register your application with Google. Google will generate a client ID and secret key for you to use. Please refer to the GitLab documentation for the procedure to generate the client ID and secret key with google.

Once you have the client ID and secret keys generated, configure them using the OAUTH_GOOGLE_API_KEY and OAUTH_GOOGLE_APP_SECRET environment variables respectively.

For example, if your client ID is xxx.apps.googleusercontent.com and client secret key is yyy, then adding -e 'OAUTH_GOOGLE_API_KEY=xxx.apps.googleusercontent.com' -e 'OAUTH_GOOGLE_APP_SECRET=yyy' to the docker run command enables support for Google OAuth.

Twitter

To enable the Twitter OAuth2 OmniAuth provider you must register your application with Twitter. Twitter will generate a API key and secret for you to use. Please refer to the GitLab documentation for the procedure to generate the API key and secret with twitter.

Once you have the API key and secret generated, configure them using the OAUTH_TWITTER_API_KEY and OAUTH_TWITTER_APP_SECRET environment variables respectively.

For example, if your API key is xxx and the API secret key is yyy, then adding -e 'OAUTH_TWITTER_API_KEY=xxx' -e 'OAUTH_TWITTER_APP_SECRET=yyy' to the docker run command enables support for Twitter OAuth.

GitHub

To enable the GitHub OAuth2 OmniAuth provider you must register your application with GitHub. GitHub will generate a Client ID and secret for you to use. Please refer to the GitLab documentation for the procedure to generate the Client ID and secret with github.

Once you have the Client ID and secret generated, configure them using the OAUTH_GITHUB_API_KEY and OAUTH_GITHUB_APP_SECRET environment variables respectively.

For example, if your Client ID is xxx and the Client secret is yyy, then adding -e 'OAUTH_GITHUB_API_KEY=xxx' -e 'OAUTH_GITHUB_APP_SECRET=yyy' to the docker run command enables support for GitHub OAuth.

External Issue Trackers

GitLab can be configured to use third party issue trackers such as Redmine and Atlassian Jira. Use of third party issue trackers have to be configured on a per project basis from the project settings page. This means that the GitLab's issue tracker is always the default tracker unless specified otherwise.

Redmine

Support for issue tracking using Redmine can be added by specifying the complete URL of the Redmine web server in the REDMINE_URL configuration option.

For example, if your Redmine server is accessible at https://redmine.example.com, then adding -e 'REDMINE_URL=https://redmine.example.com' to the docker run command enables Redmine support in GitLab

Jira

Support for issue tracking using Jira can be added by specifying the complete URL of the Jira web server in the JIRA_URL configuration option.

For example, if your Jira server is accessible at https://jira.example.com, then adding -e 'JIRA_URL=https://jira.example.com' to the docker run command enables Jira support in GitLab

Available Configuration Parameters

Please refer the docker run command options for the --env-file flag where you can specify all required environment variables in a single file. This will save you from writing a potentially long docker run command.

Below is the complete list of available options that can be used to customize your gitlab installation.

GITLAB_HOST: The hostname of the GitLab server. Defaults to localhost
GITLAB_PORT: The port of the GitLab server. Defaults to 80 for plain http and 443 when https is enabled.
GITLAB_EMAIL: The email address for the GitLab server. Defaults to [email protected].
GITLAB_SIGNUP: Enable or disable user signups. Default is false.
GITLAB_SIGNIN: If set to false, standard login form won't be shown on the sign-in page. Default is true.
GITLAB_PROJECTS_LIMIT: Set default projects limit. Defaults to 100.
GITLAB_PROJECTS_VISIBILITY: Set default projects visibility level. Possible values 'public', 'private' and 'internal'. Defaults to 'private'.
GITLAB_RESTRICTED_VISIBILITY: Comma seperated list of visibility levels to restrict non-admin users to set. Possible visibility options are public, private and internal.
GITLAB_BACKUPS: Setup cron job to automatic backups. Possible values disable, daily or monthly. Disabled by default
GITLAB_BACKUP_EXPIRY: Configure how long to keep backups before they are deleted. By default when automated backups are disabled backups are kept forever (0 seconds), else the backups expire in 7 days (604800 seconds).
GITLAB_SSH_PORT: The ssh port number. Defaults to 22.
GITLAB_RELATIVE_URL_ROOT: The sub URI of the GitLab server, e.g. /gitlab. No default.
GITLAB_HTTPS: Set to true to enable https support, disabled by default.
GITLAB_HTTPS_ONLY: Configure access over plain http when GITLAB_HTTPS is enabled. Should be set to false when using a load balancer. Defaults to true.
SSL_SELF_SIGNED: Set to true when using self signed ssl certificates. false by default.
SSL_CERTIFICATE_PATH: Location of the ssl certificate. Defaults to /home/git/data/certs/gitlab.crt
SSL_KEY_PATH: Location of the ssl private key. Defaults to /home/git/data/certs/gitlab.key
SSL_DHPARAM_PATH: Location of the dhparam file. Defaults to /home/git/data/certs/dhparam.pem
CA_CERTIFICATES_PATH: List of SSL certificates to trust. Defaults to /home/git/data/certs/ca.crt.
NGINX_MAX_UPLOAD_SIZE: Maximum acceptable upload size. Defaults to 20m.
REDIS_HOST: The hostname of the redis server. Defaults to localhost
REDIS_PORT: The connection port of the redis server. Defaults to 6379.
UNICORN_WORKERS: The number of unicorn workers to start. Defaults to 2.
UNICORN_TIMEOUT: Sets the timeout of unicorn worker processes. Defaults to 60 seconds.
SIDEKIQ_CONCURRENCY: The number of concurrent sidekiq jobs to run. Defaults to 5
DB_TYPE: The database type. Possible values: mysql, postgres. Defaults to mysql.
DB_HOST: The database server hostname. Defaults to localhost.
DB_PORT: The database server port. Defaults to 3306 for mysql and 5432 for postgresql.
DB_NAME: The database database name. Defaults to gitlabhq_production
DB_USER: The database database user. Defaults to root
DB_PASS: The database database password. Defaults to no password
DB_POOL: The database database connection pool count. Defaults to 10.
SMTP_DOMAIN: SMTP domain. Defaults to www.gmail.com
SMTP_HOST: SMTP server host. Defaults to smtp.gmail.com.
SMTP_PORT: SMTP server port. Defaults to 587.
SMTP_USER: SMTP username.
SMTP_PASS: SMTP password.
SMTP_STARTTLS: Enable STARTTLS. Defaults to true.
SMTP_AUTHENTICATION: Specify the SMTP authentication method. Defaults to 'login' if SMTP_USER is set.
LDAP_ENABLED: Enable LDAP. Defaults to false
LDAP_HOST: LDAP Host
LDAP_PORT: LDAP Port. Defaults to 636
LDAP_UID: LDAP UID. Defaults to sAMAccountName
LDAP_METHOD: LDAP method, Possible values are ssl, tls and plain. Defaults to ssl
LDAP_BIND_DN: No default.
LDAP_PASS: LDAP password
LDAP_ALLOW_USERNAME_OR_EMAIL_LOGIN: If enabled, GitLab will ignore everything after the first '@' in the LDAP username submitted by the user on login. Defaults to false if LDAP_UID is userPrincipalName, else true.
LDAP_BASE: Base where we can search for users. No default.
LDAP_USER_FILTER: Filter LDAP users. No default.
OAUTH_ALLOW_SSO: This allows users to login without having a user account first. User accounts will be created automatically when authentication was successful. Defaults to false.
OAUTH_BLOCK_AUTO_CREATED_USERS: Locks down those users until they have been cleared by the admin. Defaults to true.
OAUTH_GOOGLE_API_KEY: Google App Client ID. No defaults.
OAUTH_GOOGLE_APP_SECRET: Google App Client Secret. No defaults.
OAUTH_TWITTER_API_KEY: Twitter App API key. No defaults.
OAUTH_TWITTER_APP_SECRET: Twitter App API secret. No defaults.
OAUTH_GITHUB_API_KEY: GitHub App Client ID. No defaults.
OAUTH_GITHUB_APP_SECRET: GitHub App Client secret. No defaults.
REDMINE_URL: Location of the redmine server, e.g. -e 'REDMINE_URL=https://redmine.example.com'. No defaults.
JIRA_URL: Location of the jira server, e.g. -e 'JIRA_URL=https://jira.example.com'. No defaults.

Maintenance

Creating backups

Gitlab defines a rake task to easily take a backup of your gitlab installation. The backup consists of all git repositories, uploaded files and as you might expect, the sql database.

Before taking a backup, please make sure that the gitlab image is not running for obvious reasons

docker stop gitlab

To take a backup all you need to do is run the gitlab rake task to create a backup.

docker run --name=gitlab -it --rm [OPTIONS] \
  $USER/gitlab app:rake gitlab:backup:create

A backup will be created in the backups folder of the Data Store

Restoring Backups

Gitlab defines a rake task to easily restore a backup of your gitlab installation. Before performing the restore operation please make sure that the gitlab image is not running.

docker stop gitlab

To restore a backup, run the image in interactive (-it) mode and pass the "app:restore" command to the container image.

docker run --name=gitlab -it --rm [OPTIONS] \
  $USER/gitlab app:rake gitlab:backup:restore

The restore operation will list all available backups in reverse chronological order. Select the backup you want to restore and gitlab will do its job.

Automated Backups

The image can be configured to automatically take backups on a daily or monthly basis. Adding -e 'GITLAB_BACKUPS=daily' to the docker run command will enable daily backups, while -e 'GITLAB_BACKUPS=monthly' will enable monthly backups.

Daily backups are created at 4 am (UTC) everyday, while monthly backups are created on the 1st of every month at the same time as the daily backups.

By default, when automated backups are enabled, backups are held for a period of 7 days. While when automated backups are disabled, the backups are held for an infinite period of time. This can behaviour can be configured via the GITLAB_BACKUP_EXPIRY option.

Shell Access

For debugging and maintenance purposes you may want access the container shell. Since the container does not allow interactive login over the SSH protocol, you can use the nsenter linux tool (part of the util-linux package) to access the container shell.

Some linux distros (e.g. ubuntu) use older versions of the util-linux which do not include the nsenter tool. To get around this @jpetazzo has created a nice docker image that allows you to install the nsenter utility and a helper script named docker-enter on these distros.

To install the nsenter tool on your host execute the following command.

docker run --rm -v /usr/local/bin:/target jpetazzo/nsenter

Now you can access the container shell using the command

sudo docker-enter gitlab

For more information refer https://github.com/jpetazzo/nsenter

Another tool named nsinit can also be used for the same purpose. Please refer https://jpetazzo.github.io/2014/03/23/lxc-attach-nsinit-nsenter-docker-0-9/ for more information.

Upgrading

GitLabHQ releases new versions on the 22nd of every month, bugfix releases immediately follow.

To upgrade to newer gitlab releases, follow this 5 step upgrade procedure.

Step 1: Rev the "GITLAB_VERSION" value in the file assets/setup/install, or fetch updates from this repo to pick up this edit.
Step 2: Rebuild your docker-gitlab image.

cd docker-gitlab
docker build --tag="$USER/gitlab" .

Step 3: Stop and remove the currently running image

docker stop gitlab
docker rm gitlab

Step 4: Backup the application data.

docker run --name=gitlab -it --rm [OPTIONS] \
  $USER/gitlab app:rake gitlab:backup:create

Step 5: Start the image

docker run --name=gitlab -d [OPTIONS] $USER/gitlab

Rake Tasks

The app:rake command allows you to run gitlab rake tasks. To run a rake task simply specify the task to be executed to the app:rake command. For example, if you want to gather information about GitLab and the system it runs on.

docker run --name=gitlab -d [OPTIONS] \
  $USER/gitlab app:rake gitlab:env:info

Similarly, to import bare repositories into GitLab project instance

docker run --name=gitlab -d [OPTIONS] \
  $USER/gitlab app:rake gitlab:import:repos

For a complete list of available rake tasks please refer https://github.com/gitlabhq/gitlabhq/tree/master/doc/raketasks or the help section of your gitlab installation.

erikthorselius / docker-gitlab Goto Github PK

docker-gitlab's Introduction