This container starts wireless access point (hostap) and dhcp server in docker container. It supports both host networking and network interface reattaching to container network namespace modes (host and guest).

On the host system install required wifi drivers, then make sure your wifi adapter supports AP mode:

# iw list
...
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * WDS
                 * monitor
                 * mesh point
...

Set country regulations, for example, for Spain set:

# iw reg set ES
country ES: DFS-ETSI
        (2400 - 2483 @ 40), (N/A, 20), (N/A)
        (5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR
        (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS
        (5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
        (57000 - 66000 @ 2160), (N/A, 40), (N/A)

• Using host networking:

sudo docker run -i -t -e INTERFACE=wlan1 -e OUTGOINGS=wlan0 --net host --privileged won10/hostapd

• Using network interface reattaching:

sudo docker run -d -t -e INTERFACE=wlan0 -v /var/run/docker.sock:/var/run/docker.sock --privileged offlinehacker/docker-ap

This mode requires access to docker socket, so it can run a short lived container that reattaches network interface to network namespace of this container. It also renames wifi interface to wlan0, so you get deterministic networking environment. This mode can be usefull for example for pentesting, where can you use docker compose to run other wifi hacking tools and have deterministic environment with wifi interface.

• INTERFACE: name of the interface to use for wifi access point (default: wlan0)
• OUTGOINGS: outgoing network interface (default: eth0)
• CHANNEL: WIFI channel (default: 6)
• SUBNET: Network subnet (default: 192.168.254.0)
• AP_ADDR: Access point address (default: 192.168.254.1)
• SSID: Access point SSID (default: docker-ap)
• WPA_PASSPHRASE: WPA password (default: passw0rd)
• HW_MODE: WIFI mode to use (default: g)
• DRIVER: WIFI driver to use (default: nl80211)
• HT_CAPAB: WIFI HT capabilities for 802.11n (default: [HT40-][SHORT-GI-20][SHORT-GI-40])
• MODE: Mode to run in guest/host (default: host)

MIT

Jaka Hudoklin [email protected]

Thanks to https://github.com/sdelrio/rpi-hostap for providing original implementation.